Question about Office Equipment & Supplies

1 Answer

Video adjustment on LCD projector

I have an Epson ELP-5500 LCD projector that has a convergence problem. Are these projectors capable of any kind of adjustment for convergence issues? I have a broad electronics background, but don't really want to tear the projector apart if there's no chance of making any adjustments.

Posted by on

  • ideaguy Jan 16, 2009

    Can somebody please respond to this? I have the same convergence issue, and there MUST be a way to fix it with either software, or a physical change of the projector.   Please, if you know, let us all know...

  • CRYSTALSM Jan 27, 2009

    covergence problem on vpl-hs10 projector

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 17 Answers

Convergence on lcd is a tough issue... you can if you are really good and know what you are doing adjust the panels to correct some convergence issues. but depending on how many hours the unit has, the LCD panels may have warped due to the heat inside the projector, then corrections is pretty impossible.

goto epsons web site,, and find your local service center for help

Posted on Jul 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My epson


the light filter on the blue lcd panel is fried due to excessive dust and heat. it's a common problem with lcd projectors if you don't keep them clean and cool. unfortunately, you'll have to replace the entire optical engine, as epson does not sell individual parts.

Nov 09, 2009 | Epson - PowerLite S1+ Multimedia Projector

1 Answer

Colors out of alignment Epson EMP 500


You LCD optical engine is out of alignment. This will require an authorized service center to make the adjustment or even replace the unit if necessary. There are 3rd party companies that offer this service, perhaps in your own town or nearby. You may want to weight the cost of repair to purchasing a newer unit.

Jun 04, 2009 | Epson EMP 5500 Multimedia Projector

1 Answer

Lcd projector projects images upside down???


if you go through the projectors setup menu you will find the option to invert / flip and rotate image adjust as required

REgards Al "alastech"

May 29, 2009 | Epson PowerLite 62c Multimedia Projector

2 Answers

Epson powerlite s4 projector is pink


I assume this is an LCD. I don't remember the s4 being a DLP projector.

This sounds like the LCD panel used for the red color has gone out. The image is made up of red, green and blue images layered upon the screen. If the red panel has gone out then there is nothing filtering out the red light in the image. This causes a nice red hue to the whole screen.

It could be a simple open and reconnect fix. I personally have never opened a projector, so I'm not going to walk you through it as I do not know how hard it would be to tinker with. It should eb a cheap fix for a true repair man though.

Apr 01, 2009 | Epson PowerLite® S4 LCD Projector

1 Answer

Epson ELP 5500 projectors


Hi technoteach

Will try and get my hands on a Service Manual for this model - in which you would find the circuit diagrams. This is a faulty Mainboard that is causing the problem.

May 09, 2008 | Epson PowerLite 5550C Multimedia Projector

2 Answers

Epson ELP 5500 projectors


the filter screens could be completly covered in dust, one teacher at my school uses one of our epson 83c's a lot and he called me down because it kept shutting off completley after a while.  I took a can of air and cleaned out the screen and put it back in and now it works fine again.  By the way, if they are throwing out any projectors out, let me know, I'd love to mess around with them to see if I can get them running again.  Thanks, hope this helps!

May 09, 2008 | Office Equipment & Supplies

1 Answer

Epson Powerlite 1815p screen projector - DVD playback video jerkiness when there is motion in the video


Hi,

I am assuming that the DVD plays normally on the display of the Dell 745.

Then the issue(s) may be with the:
1. Networking configuration/set-up of the Dell and/or the Epson;
2. ethernet cable;
3. configuration/set-up of the projector or the Epson itself.

A couple of things you can try:
1. Optimize your networking throughput.
1.1 Increase your PCI Latency Timer to 128 or 255 in the Dell's BIOS/CMOS setup (if present);
1.2 Try running DRTCP.exe and/or TCPOptimizer.exe appropriate to the Dell's OS;
1.3 Disable all other networking activities on the Dell. This may include auto updates, security/antivirus checks, etc. while running the DVD;
1.4 Slim down Dell's startup programs to bare minimum;
1.5 Increase your OS' swap file to roughly double your onboard memory
2. Try running a hub midway between the Dell and the Epson.
3. Verify that it is not the Epson that is problematic by playing a video source to the projector’s Video or S-Video port. If it is, then you have narrowed down the problem to the playing capability of the Epson.

Alternately if all else fails, perhaps you can try using:
1. a DVD player to the projector’s Video or S-Video port; and/or
2. a USB external DVD drive or a CompactFlash card (with a copy of the movie) direct to the 1815p
while settling the main issue.

Hope this be of help/idea. Pls post back how things turned out or should you need additional information.

Good luck and kind regards.

Jan 07, 2008 | Office Equipment & Supplies

2 Answers

Proxima C160 Color Convergence Issue...


There are no adjustments for convergence in the service menu. The code is: Effect, Blank, Video, Computer, Volume Down, Volume Up.

Jun 01, 2007 | ASK Proxima C160 Multimedia Projector

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,567 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98921 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...