Question about JVC RX-884V Receiver

1 Answer

Not getting surround sound

Hey, I have just picked up this amp and 3 JBL speakers, a center and two rears. Problem is I can't get the center and the rears to work at the same time. When I turn on the Surround I only get the center speaker. I have managed to get some sound out of the rears but it is very faint and echoes. The audio connection is made from my rogers box to the amp via a digital optical cable.

I do not have the manual so I am working with trial and error. Is there anything you can suggest??

Even if I can get the same sound coming out of all speakers (not true surround) that will do.

Thanks

Posted by on

  • Anonymous Feb 24, 2009

    I guest you're not the only one. I have the same problem.They don't work all togheter.So i'll try to talk whit JVC to see what they'll say. i hope they have the answer and they can fix the problem. Thanks for the phone number.



    Sue

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How are you doing, I had the same problem, however, call the jvc 1-800 toll free number which you can get from your yellow page book or call 1-800-555-1212 to get the number for jvc to get a instruction manual for that model.......when calling go to technical department!!!!!.......

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I hook up the rear speakers to my in-wall speakers, I can't get any sound. I have speaker button 1 and 2 selected.


Hi:
you need to clear that you connect wall speakers for font,center or rear (surround) speakers?
Seem you connect for Front speaker.
Rear (surround) speaker will have "rear" mark on the back of your reveiver.
In general you need to select both buttons 1 & 2 then check your speaker wires connect into "output1" or "output 2" hint: each output will have 1 for left and 1 for right speaker. Each Left or right speaker will have 2 connection 1 red color (+) and 1 white color (-). Try to match these colors code for your speakers connection.

Feb 25, 2011 | JVC RX-884V Receiver

4 Answers

Subwoofer


go to audio set up and configure the system for 5.1 or higher sound output.then only all the speakers ll work

Jan 03, 2008 | Yamaha RX-V640 6.1 Channels Receiver

1 Answer

Hello,I'm trying to conect 4 speakers(Bose 161,4-8ohms,50w each) and 2 speakers (JBL cf100(3way speakers),8ohms,100w each) to rceiver Pioneer VSX-455, I want to conect all of them at the same time.please I...


Well if you look on the back it plainly says speakers should be between 8-16 ohms.

It has facilities for 2 pairs of fronts (A and B) which could be run concurrently if they met the >8-ohm spec.

http://www.use.com/PIONEER_767cb5bb4ea6f30a06fc?p=7#photo=9

http://www.use.com/showorig.pl?set=767cb5bb4ea6f30a06fc&p=6

The JBL's would work best as primary front speakers.

http://www.retrevo.com/support/JBL-CF100-Speakers-manual/id/597bh151/t/2/

If you wired the Bose in series with each other, they'd work as one surround speaker 'pair' electrically, maybe even sonically if you arrange them across the sides and/or rear. I'd experiment.

http://products.bose.com/pdf/customer_service/owners/og_161.pdf

You'll need a separate amp for any center or sub speakers.

Feb 03, 2011 | Pioneer Audio & Video Receivers

2 Answers

Lux Audio 5.1 home theater speaker & Yamaha HTR 5540 AMP


configure ur PC (both OS audio and third party sound driver) for surround sounds. control panel- sounds and audio devices - speaker settings - advanced - speker settings. so this done. make sure u select the 6 input channel - the button is on the right edge near the volume knob. near the vol button there are two buttons for selecting input type with up down arrow. from that u can select the input type this will be indicated on the top front indicator. but with the 6 input channel selected all selections are preceeded. if u select stereo mode u will have left/ right audio only.
make sure u connect the input right. connect from computer to 6 channel input. main, surround, center and sub-woofer.  connect the spekers to main (L/R), rear(surround) (L/R), center and sub woofer to terminal marked sub woofer ouput. this done select like i said before the 6 channel button. that should do it.

Mar 13, 2010 | Yamaha HTR-5540 Receiver

1 Answer

No sound from surround speakers or rear speaker


is there a switch in the back for surround on/off

Apr 14, 2009 | Yamaha HTR-5730 Receiver

1 Answer

Speaker set up problem


They hook to the rear surround.

Dec 20, 2008 | Audio & Video Receivers

1 Answer

Connection a JBL surround cinema speakers with sub to a Yamaha


if you do not have the digital hook up from the tv to the reciever
304c659.gif then you will not get the subwoofer sounds or the dolby digital sounds
if you don't have this on your tv then just turn off the dolby digital when watching the tv , and you should be able to hear the subwoofer thru the virtual surround sound
hope this info is worth a fixya and if you need other help then just ask me and
i'll be glad to help

electech

Nov 23, 2008 | Yamaha HTR-5850 Receiver

3 Answers

No sound back two speakers


After using the method of last resort (RTFM) I discovered that Yamaha 7.1 amps assign an order of priority to the speakers. The surround speakers have higher priority than the surround-back speakers. I had connected the rear speakers (in a 5.1 configuration) to the surround-back speaker terminals and since nothing was connected to the surround terminals the E-6 error happed on auto-setup.

I eventually fixed this by connecting the rear speakers to the Surround L/R terminals and then, via the manual setup menu, set rear surround = NONE. This causes the amp to route the rear-surround signals to the Surround L/R terminals. The auto-configure then completed successfully.

May 18, 2008 | Yamaha RX-V661 Receiver

2 Answers

Back speaker sound


Why would you only hook up one speaker for the rear channel? in 7 channel stereo, all speakers have 100% signal sent to them as "stereo" in Dolby digital, rear speakers are for "effects" not dialog. like a plane flying past you or a car driving by, that's when you hear a rear speaker. It also needs to be placed behind you, not next to you or in front of you. Unless you are using zone 2 & 3 the receiver's surround back will work. if you only have left,right,center,sub & rear; the rear speakers should go to surround speakers not surround back. If you still have questions, post a comment and I can explain further. Hope this helps

Feb 04, 2008 | Yamaha RX-V2600 Receiver

Not finding what you are looking for?
JVC RX-884V Receiver Logo

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Rod
Rod

Level 2 Expert

224 Answers

Are you a JVC Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...