How do i set time and date on machine - AT&T ATT1739 Digital Answering Machine

If your Mercury 130W electronic transaction register (ETR) machine is backdating when producing monthly total sales, there may be a problem with the machine's settings or software. Here are a few steps you can try to troubleshoot the issue:

1. Check the date and time settings: The date and time settings on the ETR machine may be incorrect, which can cause the machine to backdate when producing monthly total sales. To check the date and time settings, press the "Menu" button on the ETR machine and navigate to the "Date/Time" settings. Make sure that the date and time are correct and adjust them if necessary.
2. Check for software updates: The ETR machine may be using an outdated version of the software, which can cause issues with the monthly total sales. To check for software updates, press the "Menu" button on the ETR machine and navigate to the "Software" settings. If there are any updates available, download and install them to see if they resolve the issue.
3. Reset the machine: If the date and time settings and software are up to date, you can try resetting the ETR machine to see if that resolves the issue. To reset the machine, press the "Menu" button on the ETR machine and navigate to the "Reset" settings. Follow the on-screen instructions to reset the machine, and then try producing the monthly total sales again to see if the problem is resolved.

If these steps do not resolve the issue, it is best to contact the manufacturer of the Mercury 130W ETR machine for further assistance. They should be able to provide you with specific guidance for troubleshooting the problem with your machine.

Does it keep losing the date when you turn it off? or are you asking how to set the time and date?

If you're losing time and date when you turn the unit off, there's a coin cell battery on the main processor board that needs replacing.

If you just want to set the time and date - Press "SHIFT" and 12 lead keys at the same time. select "7" for date and time, use the return key to select date or time

To Set Date & Time on a Xerox 3635
Press: Machine Status (hard button)
Press: Tools (on touch screen)
Press: Device Settings (on touch screen)
Press: Set Date & Time (on touch screen)

The machine will have tabs at the top

Press: Set Date
Press: Month
Enter the Month: (Using the hard buttons)
Do the same for Day and Year
Press: Save

Press: Time
Same procedure as above setting the Date
Press Save

Turn the machine off and back on for settings to take effect.

This was taken directly from the Brother 2820 Manual:

Setting the Time

When the machine is not in use it will display the date and time. If you set up the Station ID the date and time displayed by your machine will be printed on every fax you send. If there is a power failure, you may have to reset the date and time. No other settings will be affected.

1 Press Menu/Set, 0, 2.
[2. Date/Time]
2 Enter the last two digits of the year.
Press Menu/Set.
3 Enter two digits for the month.
Press Menu/Set.
(For example, enter 09 for September,
or 10 for October.)
4 Enter two digits for the day.
Press Menu/Set.
(For example, enter 06 for 6th.)
5 Enter the time in 24-Hour format.
Press Menu/Set.
(For example, enter 15:25 for 3:25 P.M.)
6 Press Stop/Exit.
The LCD now shows the date and time
whenever the machine is idle in Fax
mode.
When the machine is in Sleep mode, the
LCD shows Sleep. (See Sleep Time on
page 2-8.)


Turning on Automatic Daylight Savings Time

You can set the machine to change automatically for Daylight Savings Time. It will reset itself forward one hour in the Spring and backward one hour in the Fall. Make sure you have set the correct date and time in the Date/Time setting.

1 Press Menu/Set, 1, 5.
[5. Auto Daylight]
2 Press Up Arrow or Down Arrow to select On (or Off).
Press Menu/Set.
3 Press Stop/Exit.

1Press Menu/Set, 0, 2.

2 Enter the last two digits of the year. Press Menu/Set.

3 Enter two digits for the month. Press Menu/Set.

(For example, enter 09 for September, or 10 for October.)

4 Enter two digits for the day. Press Menu/Set.

(For example, enter 06 for 6th.)

5 Enter the time in 24-Hour format. Press Menu/Set.

(For example, enter 15:25 for 3:25 P.M.)

6 Press Stop/Exit.

The LCD now shows the date and time whenever the machine is idle in Fax mode.

When the machine is in Sleep mode, the LCD shows Sleep. (See Sleep Time on page 2-8.)

Hopefully that worked correctly and solved your problem!

Set the date and time:
The current date and time are shown in the display when the machine is on and ready for use (Ready mode). The date and time will be printed on all faxes you send.
1. Press Menu.
2. Press Left Right Arrow to choose SET DATE & TIME and press Start/Enter.
3. Press Start/Enter when the display shows Date Format.
4. Press Left Right Arrow to select either Europe (day month year) or USA (month day year) and press Start/Enter.
5. Press Start/Enter when the display shows Date & Time.
6. Set the date and time. You can move the cursor by pressing Left Right Arrow.
7. Press Start/Enter when the date and time are correct.
1-AM 2-PM will display.
8. Press 1 or 2.

To set the date, make sure that you are in Rate Set. type in the date such as August 3, 2010 would be entered as 08.03.2010 then press the date time key. This will set the date. To set the time type in the time such as 4:20 PM would be entered as 16.20 then press the date time key and this will set the time.

Entering the Date and Time Note: When your machine is connected to a computer with the MP driver installed, even if the date and time are entered from the Operation Panel of the machine, the date and time will be read from your computer every time you start the computer, turn the machine on, or disconnect and connect the USB cable. When using your machine connecting to your computer, set the date and time on your computer precisely.
The date and time will be reset when you disconnect the power cord or there is a power failure. In this case, you can set it again on the machine. Alternatively, it can be read from your computer and set on the machine by connecting the machine to your computer with the MP driver installed.


1. Press [FAX], then press [Menu].
2. Use [ left ] or [ right ] to select <USER SETTINGS>.
3. Press [OK] two times.
4. Use the numeric buttons to enter the date and time (in 24-hour format). Enter only the last two digits of the year.
5. Press [OK].
6. Press [Stop/Reset].

Just want to change the date and the time for the machine

This looks like the UK version of the Canon 730. Look in the manual but as I recall, Press data registration and then set scroll down to time settings and press set and scroll down to time and date and set. Enter new time and date and set. Press stop to goto standby