Question about Siemens SX66

2 Answers

Siemens Sx66 Pda phone- not responding for hard reset-

I purchased the Sx66 pda phone yesterday and loaded some softwares.I opted for the password protection with simple four digits and entered the same. But some how i have forgotten the password and tried to hard reset the instrument as given in the manual in the case of forgetting the password. I hold down the power button and pressed the soft reset button simultaneously for 5 secs.But the hard reset could not be done and i get the same screen asking the password .I tried so many times the hard resetting but could not do it .The instrument is standing with the password demanding screen.How to solve this problem.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

To hardreset, hold down the camera and recording botton, with the stylus push in the reset botton near the chargi point still holdin down the camera and recording bottons. After the blue,green,red colour screen appears. follow the instruction on screen using the recording botton to nevigate btween obtions and the camera botton to toggle btween yes or no and the email or message botton to execute comands.

Posted on Mar 05, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Siemens Master
  • 13,433 Answers

Hello, Did my solution fix your SX66 problem?

Posted on Jun 25, 2008

  • Ekse Jun 25, 2008

    My solution was the






    Comment by Ekse, posted on Jun 23, 2008
    If the hard reset doesn't reset the phone, then we need to reprogram the rom in the device.

    Please read here about upgradeing - flashing
    http://wiki.xda-developers.com/index.php...



    Comment by Ekse, posted on Jun 23, 2008
    Please go thought the page fully, first backup your old rom to a SD card, save it to your pc.

    Get a new rom from the website, program it to the sd card, program the rom on the sd card to the phone.

    this is all covered on those pages.

  • Ekse Jun 25, 2008

    please go to the premium problem page and press accept on the solution that fixed the problem - to close the thread.



    Thank you,

    Ekse

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After a soft reset, my Palm TX becomes stuck on the "Palm Powered" screen. I have tried all of the resets, including the hard reset. The PDA does not respond to any of the resets. I can not turn the PDA...


You need to perform full reset which will erase all personal data and set everything to factory default. You need to press reset and power button to perform full reset.It will give you confirmation once you choose yes it will perform hard reset If issue persist you may disconnect and reconnect to internal battery

Aug 02, 2009 | Palm TX Handheld

1 Answer

Slow respond


The best solution to these problems is hard resetting your device. A hard reset will bring your PDA to it's factory default state, so your PDA will be as fast as it was when it was brand new. But this process will erase all your stored data (Such as adress book, messaged, appointments, tasks, pictures, ...) so you should consider having a backup of your PDA to your PC with a backup software before you hard reset your device. So later when you hard reset, you can recover the personal data with this backup file and continue using your PDA faster.
To hard reset your PDA, you must press the on/off button and reset button at the same time (reset button is a small button that needs to be pressed with your pen, and usually it is located in the bottom of the PDA). And later, wait a couple of minutes and the windows will be reinstalled and load up with the starting page of the screen alignment. After you completed all the settings, you can recover your data from your backup file (from PC).

Apr 03, 2009 | O2 Xda IIs Pocket PC

5 Answers

I was trying to move an address list from the computer to my hand held and suddenly it has Please Wait on the screen of the hand held and it will not turn off or do anything


try to hard reset

It is some time very important to Hard reset a PDA for example if you want your PDA to be factory default or or operating system corruption etc the following are the information, how to do a hard reset on every PDA as different PDA manufacturer have different methods.

To hard reset, press and hold the power button and press in on the reset button (reset hole) on the back of the unit for about 2-5 seconds. Release both buttons and you will see a confirmation screen asking you if you would like

Dec 31, 2008 | PDAs

1 Answer

Will not shut off


I recalled a problem a few years ago with my PDA and the solution (from Palm while still under warranty) was to do a HARD RESET of the unit.

Please note that a hard reset will wipe clean all memos and other information stored in your PDA. Make sure you HOTSYC your PDA before doing a hard reset. It will reset the unit back to its original factory setting. The way to accomplish this is by holding down the on/off switch while pressing the reset button on the back of your PDA. It will respond back by asking if you really want to reset (yes or no).

I did this and now I can turn off my PDA without worrying about it coming back on. Now all I have to do is figure out what in the old config (that's now backed up on the desktop backup) is freaking out the PDA and causing it to not turn off. Chances are it's a software that was recently added.

Hope this helps!

Good Luck and Happy New Year!

Dec 03, 2008 | Palm Tungsten E Handheld

2 Answers

Password


ok.... i see thtt ur prob is the same as mine. so here is the solution for it.... in ur pda on the left side there will be two buttons a camera and a voice recorder ok... just hold those two buttons at the same time and stick ur stylus in the soft reset hole.. located at the bottom of ur pda... and keep those buttons and the soft rest botton pressd ultil u see the options on ur screen 
1.Enable KITL: NO
2.Format Registry Hive: YES
3. Format Storage: YES

yes and no can be nevigated by the two buttons camera and voice recordr ..
 once these optinons are set press the mail botton.... and kazaaammmm ur pda is blank dnt worry it will reset or u can turn it off if it dosnt respond for 5 mins... and ur problem is solved the phone is reset right from the beggining and u can install all ur programns again!!!

Aug 16, 2008 | O2 Xda IIs Pocket PC

2 Answers

Can't hard reset


I enter a password and forgot the same.I tried to hard reset the pda as given in the manual by pressing the power button and the soft reset button for 6 secs.But the instrument goes only to the password window.I tried many times the hard setting but no success. Instuct me how to solve this

May 23, 2008 | Siemens SX66

1 Answer

Software Help


xda devolpers (google it)

Dec 07, 2007 | Siemens SX66

2 Answers

Help me


Check hard reset. Turn off your pda and hold on the turn on button as same time you make you normal reset.
Lucky

Nov 26, 2007 | Siemens SX66

2 Answers

Callers can't hear me speak


Corded Mic works great. I am going to try and buy a $20 Mic piece and replace that to see if it works, as it does not seem to be a major problem.

Aug 17, 2006 | Siemens SX66

Not finding what you are looking for?
Siemens SX66 Logo

Related Topics:

4,228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens PDAs Experts

k24674

Level 3 Expert

7987 Answers

kakima

Level 3 Expert

96396 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Siemens PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...