posted by maryellen087 on Jun 23, 2008
When I turn on the TV I get no sound and no picture. The on button flashes green and then goes to flashing red like the TV is shutting off.
1 Other User Has The Same Problem
Comment by happyhslappy, posted on Jul 07, 2008
After we relpaced the lamp our tv does not have a picture. what else could it be?
Solution #1
posted on Jul 22, 2008
It could be the ballast that is bad. A bad ballast also shortens the Lamp life .
Was this solution helpful? Show your Appreciation by rating it:
Suggest a new solution for this problem
Post a New problem for Panasonic PT-50LC13 50 in. Rear
Email this problem
Post a New problem for Panasonic PT-50LC13 50 in. Rear
Email this problem
Can you Help with these Projection Televisions problems?
Panasonic PT-50LC13 50 in. Rear Projection...
Panasonic LCD rear projection...
Panasonic LCD rear projection...
recently devoloped light blue... Answer This...
Panasonic PT-50LC13 50 in. Rear Projection...
Glass or something behid the...
Glass or something behid the...
During today's earthquacke my... Answer This...
Panasonic PT-50LC13 50 in. Rear Projection...
no picture
no picture
The tv has a newer bulb, but... Answer This...
Panasonic PT-50LC13 50 in. Rear Projection...
service mode
service mode
so how do u go into service... Answer This...
Panasonic PT-50LC13 50 in. Rear Projection...
No "Normal" picture
No "Normal" picture
I ordered the correct remote; I... Answer This...
Repair Service
Find Projection TV Repairman Near You:
