Question about Zenith R40W46 40" Rear Projection HDTV-Ready Television

2 Answers

Turns off automatically after 5 seconds. Momentary display of saturated picture and sound from memory. Brief menu display, superimposed on screen. Could this have been caused by a spike on the cable (during a storm)?

Posted by on

  • SteveChicago Jul 28, 2008

    Zenith repairman came out and said that a new picture tube with PCB would fix it ... $585 (including service call). Comcast said that it couldn't have been a spike on the cable, but their insurance provider sent me a check for the repair costs anyway! I think that the Zenith guy had some influence in getting the insurance to pay. ...

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine did that too, turned out a picture tube went out on it. I was told that it probabely was a sensor that was turning it off. the picture tube, I was told, would cost me over 600 dollars

Posted on Jul 28, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

IF YOU NEED MORE INFORMATION ABOUT THIS MODEL
VISIT
www.tv-solutions.redtienda.net

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My camera turns on for a brief second and then immediately turns off. The lense has no problems going in and out it's just the screen that won't stay on.


Check your settings to see if the display is turned off in shooting mode. Does the camera still take pictures without the display on (using the traditional view finder). This is a feature that saves battery life. Can usually be turned off/on in the settings menu.

Jan 03, 2011 | Kodak EasyShare Z710 Digital Camera

4 Answers

Trutech Digital Photo Frame


Image quality using default factory settings is awful. Colors are over-blown, faces are washed-out, and highlights are cropped. People on the internet compained that there is no brightness control -- there is..but its hidden in a menu. Press the Setup button on the remote and move to the "System" settings. I've found these settings produce a fairly correct balance of color, detail, and brightness:

* Brightness=5
* Contrast=1
* Saturation=2

Mar 31, 2008 | Electronics - Others

3 Answers

LTV30c 29.6 momentary turns on


hey i got it your tvs display is gone so it cannot saw the picture just change it and it will be ok.

Dec 07, 2007 | Videoseven LTV30C 29.6 in. LCD Television

2 Answers

Picture & sound go on & off every sec, red light blinks 5 times


helloFive blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

shaun

Oct 25, 2009 | Sony Grand WEGA KDF-55XS955 55" Rear...

1 Answer

Motorola w385 turns off on its own


check the memory on your phone. if your screen turns white and than automatically shuts off. sounds like you may not have enough memory available to open your pictures. go to menu than my content>options>check memory. this should tell you how much memory you have available. if you are zero memory available, you may have to contact motorola or your carrier to reset your phone, which you will lose all your contact information and photos. good luck!!

Jul 20, 2009 | Motorola Mobility W385 Cellular Phone

1 Answer

Pictures turns small


Format memory stick by going into menu and memory setup, if memory is formatted without error that means memory seems good. If problem is still there, use another memory stick.

Mar 25, 2009 | Sony Cyber-shot DSC-T50 Digital Camera

1 Answer

Television screen is showing mirror image not the actual image.


There's a button on the original remote control that does exactly that:

(Please vote or comment if my solution helped you!)

Adjusting PICTURE FLIP Settings
You can set the orientation of the picture.
Directly setting the PICTURE FLIP
1
Press PIC. FLIP to display the
PICTURE FLIP screen.
2 Press PIC. FLIP to change the
setting.

Setting the PICTURE FLIP on the
MENU screen
1
Press MENU to display the MENU
screen.
2 Press a/b to move the cursor to
PRESET, and press ENTER.
3 Press a/b to move the cursor to
PICTURE FLIP, and press
ENTER.
4 Press c/d to select the desired
picture flip setting, and press
ENTER.
5 Press MENU to return to the main
screen.
NORMAL MIRROR ROTATE
UPSIDE DOWN
A•
The PICTURE FLIP screen automatically
disappears in 3 seconds.
• [NORMAL]: normal image
[MIRROR]: mirror image
[ROTATE]: rotated image
[UPSIDE DOWN]: upside down image

Oct 22, 2008 | Sharp LC-15AV7U 15 in. LCD Television

2 Answers

Phillips 37PF73203 37 in Television goes straigt to Menu and stays


When I turn on my TV it goes straight to the menu screen. You can still hear sound but no picture. When I try to exit you see the picture for about a second then it automatically flashes back to the menu screen. Even if I try to use the functions in the menu screen it flashes right back to the main menu screen. Very frustrated...need help!

Jul 13, 2008 | Philips 37PF7320A 37 in. HD-Ready LCD...

1 Answer

Picture screen


You can choose whether or not to display the picture you have just taken on
the monitor.
ON : The picture being recorded to the card is displayed. This is useful for
making a brief check of the picture you have just taken. You can
resume shooting anytime during REC VIEW.
OFF : The picture being recorded to the card is not displayed. This is
useful when you want to prepare for your next shot while the
previous picture is being recorded.
1 In the shooting mode top menu,
select MODE MENU
 SETUP 
REC VIEW  OFF or ON, and press

Jun 25, 2008 | Olympus Camedia C-350 Digital Camera

1 Answer

Optio M20 Camera: Press on/off button to power up camera, the camera opens the lens cover, turns on a red led inside the lens, cycles the lens out and back in,then makes about 5 little popping noises. The...


i got it!!! on my cam i hold down the menu button at the same time power on, it will showup a " ver 1.00" and lens move a little maybe u have to do it 2 times but second time it should work

Mar 29, 2008 | Pentax Optio M20 Digital Camera

Not finding what you are looking for?
Zenith R40W46 40" Rear Projection HDTV-Ready Television Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...