- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If printing is blurry even when the ink roller is in the proper position, replace the roller. Ink roller: Type EA-732R
WARNING APPLYING INK TO WORN INK ROLLER OR USE OF UNAPPROVED INK ROLLER MAY CAUSE SERIOUS DAMAGE TO PRINTER.
1) Turn the power off. 2) Remove the printer cover. (Fig. 1) 3) Remove the ink roller by turning it counterclockwise and pulling it upward. (Fig. 2) 4) Install the new ink roller and press it in the correct position. Make sure that the ink roller is securely in place. (Fig. 3) 5) Put back the printer cover.
Replacing the Ink Roller 1. Press OFF. 2. Remove the printer compartment cover. 3. Remove the ink roller from the right side of the compartment. Insert your index finger, nail down, under the tab on top of the ink roller. Gently lift the ink roller out of the compartment. 4. Lower the new ink roller (IR-21) into the compartment and align the hole in the ink roller with the pin in the compartment. Press down until it snaps into place. 5. Replace the compartment cover. Warning Never refill or moisten the old ink roller. This can damage the printing mechanism and void the warranty.
The instructions in the manual are (1) remove the printer cover by pressing down on the (triangle) mark. (2) Lift up the old ink roller and remove it (3) Insert the new ink roller by pressing it gently into position (Use Canon Ink Roller CP-16) (4) replace the printer cover. My roller has the term "Pull Up" on the left side of the roller.