- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The blue ethernet cable from the modem to the internet port on the router. The other ethernet cable goes from one of the other ports on the router, to the ethernet input on your desktop tower. That should do it.
Try setting it up as follows, if its not working come back on and let us know.
Plug in the modem power.
Plug in the router power.
Plug in one ethernet cable from the modem to the internet port or WAN port of the router.
If not wireless, plug a second ethernet cable into the "1" port of the router and the other end of that cable to the computers LAN or ethernet port.
Attempt to get on a website.
If this is unsuccessful, restart the modem by unplugging the power cord from the modem, wait 15 seconds, then plug it back in.
Unplug the router, wait for 15 seconds then plug it back in.
Still doesn't work?
On your computer, hit Start>Run>type cmd in the text box and hit enter.
A window will open up with a cursor.
Type ipconfig /release
Type ipconfig /renew
Try once again to access a website. If this is unsuccessful, return this site and let us know what steps you have tried.
Make sure you have the latest firmware downloads for your ServStation. The latest release - 6.11 - has upgrades for the latest Mac operating systems. If you're switching to a PC based solution you shouldn't have any problems connecting to the ServStation. If you still are, what exactly is the error you are seeing?
Is this owned by a school. If it is, many local technology centers will come and work on this for free. Without seeing the device myself it will be hard because finding a tech manual for this item is difficult.
Did PrimeArray know this belonged to a school?
Very simple.. if you don't have a hub or switch, you need a 'cross over cable' which is similar to a normal ethernet cable, but different pin configuration. With the cross over cable between the two pc's (plugged into the ethernet ports) you have to make sure the windows & any third part firewall is off.. change the IP address & subnet mask to the same subnet.. Eg. Click Start button, control panel, click on network connections, click on the local connection that is in connected state, select properties, find the (TCP/IP) option double click on that, select the 'use the following address' radio button (dot in the circle) then enter a new (ficticious) address like 10.0.0.8, then a subnet of 255.255.255.0 - Then do the same on the other PC.. except the IP address must be different Eg 10.0.0.7 - There are a number of other ways to do this, but this is probably the simplist. Remember to put the IP back to way you found it, otherwise your internet access may not work when you plug your normal internet cable back in. Remember o turn the firewall back on. Boot the pc's. Good Luck.
Had the same prob configured as 192.168.0.* for my previous router.
Make sure your setup node is using a 10.0.0.* and plugged directly into one of the Zoom's ethernet ports. After this change the "install" software could detect the router and browser could connect to http://10.0.0.2 to really set up the router.
I also got hosed (couldn't establish DSL link) because I reused the old quality patch cord from the old router. Pinout standards have changed and it came right up with the cheesier Zoom-supplied cable.