Question about JVC Everio GZ-MG30US Camcorder

1 Answer

Bruning to DVD

I have transfered all of my videos on to my CPU. I have opened my software program and found my videos selected the ones I wanted to "author and burn". It goes through the procees of importing them and then it take about 5-8 minutes "authoring" and then I get the "ERROR CODE FF037303" It pops out my disc and tells me it cannot finish the specified task.

Posted by on

  • 2 more comments 
  • JacyT Jul 02, 2008

    I add my videos to the program select all videos and then do author and burn. It will initialize them but when it gets to the burn screen it just keeps saying 0%. It won't burn any of my videos!

  • Anonymous Jul 20, 2008

    I have transfered all of my videos on to my CPU. I have opened my software program and found my videos selected the ones I wanted to "author and burn". It goes through the procees of importing them and then it take about 5-8 minutes "authoring" and then I get the "ERROR CODE FF037303" It pops out my disc and tells me it cannot finish the specified task.

  • Anonymous Jul 20, 2008

    I have transfered all of my videos on to my CPU. I have opened my software program and found my videos selected the ones I wanted to "author and burn". It goes through the procees of importing them and then it take about 5-8 minutes "authoring" and then I get the "ERROR CODE FF037303" It pops out my disc and tells me it cannot finish the specified task.

  • Anonymous Jan 25, 2009

    I have the same problem... and I too will take this stupid thing back and buy one that functions unless we find an answer quite soon.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Didn't find a soultion. Can't find any one who can unless I pay for it. I spent too much for these 4 cameras and am about to take them back and get 4 new cameras to whom at least offer free support for at least through the warranty.

Posted on Jun 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Import video files (mpeg, mp4, etc..) to (mod.moi) canon fs400


Visit www.download.com (part of CNET), and search for 'video convert' You'll see dozens of programs that can do the job. Make sure you select one for your OS (Windows, Mac, etc.), and be aware that there are both 'free' and 'trial' programs there to try. Also, read EVERY screen when installing, being sure to UNcheck any optional stuff you do NOT want (toolbars, new browsers, etc.).
http://download.cnet.com/1770-20_4-0.html?tag=mncol%3Bsort%3Br&query=video+convert+.moi&searchtype=downloads&filter=licenseName%3D%22Free%22'platform%3DWindows%2CMac%2CiOS%2CAndroid%2CWebware%2CMobile&filterName=licenseName%3DFree'platform%3DWindows%2CMac%2CiOS%2CAndroid%2CWebware%2CMobile&sort=&rpp=10

Dec 02, 2013 | Canon FS400 Camcorder

1 Answer

Canon Vixia HF 20 how do you get the files onto the mac


This camera stores the video using a unique method, and does not allow you to simply drag and drop the video files - you also can not easily find the camera and play the video real time to transfer it ...
You need a compatible software program, meaning the software needs to be compatible with the camera ... there are many available ... but if you are looking to buy software check to see if it is compatible with your camera before purchasing ... I wonder, what software will you be using to edit the video?
For example, you can use Final Cut Express. It will find the camera as long as the camera is connected via USB and there is power applied to the camera ... once connected, look at the camera LCD screen and select "Computer" for the connection ... then, in Final Cut Express, select Log and Transfer (File menu), and you will get a new window. You camera should be recognized and you can select the video takes that you want to transfer and then hit "add selection to queue" and the transfer will begin.
You will first want to check in Final Cut Express where the transfers will end up on the computer, and pick a suitable location with plenty of hard drive space (Final Cut Express menu / System Settings / Scratch Disks) so you can find them if you want to at some point in the future.

Assuming you will be editing in Final Cut Express, you won't actually need to find them, but its important to select a scratch disk location that has plenty of hard drive space, and if you want to copy one of the clips to use it directly to just upload to YouTube or something like that, you'll know where they are (they will be .mov files, and can play all by themselves using Quicktime or any similar program)

As always, refer to the manual if you run into any problems ...
Hope this helps!

See our latest DVD at www.whamuniversal.com

Jan 30, 2010 | Canon VIXIA HF20 High Definition Camcorder

1 Answer

How to download canon hf20 movies and change them so can alter the movie


This camera stores the video using a unique method, and does not allow you to simply drag and drop the video files - you also can not easily find the camera and play the video real time to transfer it ...
You need a compatible software program, meaning the software needs to be compatible with the camera ... there are many available ... but if you are looking to buy software check to see if it is compatible with your camera before purchasing ... I wonder, what software will you be using to edit the video?
For example, you can use Final Cut Express. It will find the camera as long as the camera is connected via USB and there is power applied to the camera ... once connected, look at the camera LCD screen and select "Computer" for the connection ... then, in Final Cut Express, select Log and Transfer (File menu), and you will get a new window. You camera should be recognized and you can select the video takes that you want to transfer and then hit "add selection to queue" and the transfer will begin.
You will first want to check in Final Cut Express where the transfers will end up on the computer, and pick a suitable location with plenty of hard drive space (Final Cut Express menu / System Settings / Scratch Disks) so you can find them if you want to at some point in the future.

Assuming you will be editing in Final Cut Express, you won't actually need to find them, but its important to select a scratch disk location that has plenty of hard drive space, and if you want to copy one of the clips to use it directly to just upload to YouTube or something like that, you'll know where they are (they will be .mov files, and can play all by themselves using Quicktime or any similar program)

As always, refer to the manual if you run into any problems ...
Hope this helps!

See our latest DVD at www.whamuniversal.com

Jan 02, 2010 | Canon VIXIA HF20 High Definition Camcorder

1 Answer

How do i transfer canon hf20 files to iMac with usb cable? Only the Digital Video Solution Disk has "for Macintosh" on it. All the File Transfer disks say windows and will not load on my iMac


You need an editing program, and then you will transfer the files from within the program ...

This camera stores the video using a unique method, and does not allow you to simply drag and drop the video files - you also can not easily find the camera and play the video real time to transfer it ...
You need a compatible software program, meaning the software needs to be compatible with the camera ... there are many available ... but if you are looking to buy software check to see if it is compatible with your camera before purchasing ... I wonder, what software will you be using to edit the video?
For example, you can use Final Cut Express. It will find the camera as long as the camera is connected via USB and there is power applied to the camera ... once connected, look at the camera LCD screen and select "Computer" for the connection ... then, in Final Cut Express, select Log and Transfer (File menu), and you will get a new window. You camera should be recognized and you can select the video takes that you want to transfer and then hit "add selection to queue" and the transfer will begin.
You will first want to check in Final Cut Express where the transfers will end up on the computer, and pick a suitable location with plenty of hard drive space (Final Cut Express menu / System Settings / Scratch Disks) so you can find them if you want to at some point in the future.

Assuming you will be editing in Final Cut Express, you won't actually need to find them, but its important to select a scratch disk location that has plenty of hard drive space, and if you want to copy one of the clips to use it directly to just upload to YouTube or something like that, you'll know where they are (they will be .mov files, and can play all by themselves using Quicktime or any similar program)

As always, refer to the manual if you run into any problems ...
Hope this helps!

See our latest DVD on PA systems, avoiding feedback and echo, and great AA Conference Speaker Tapes and CDs at www.whamuniversal.com

Oct 02, 2009 | Canon VIXIA HF20 High Definition Camcorder

3 Answers

Hitachi dz mv230a DVD CAM - can't copy video to computer (WXP Pro)


Make sure its pluged in to a powersource and try again, you should see the camera in my computer.

There might be fault in the camera.

May 18, 2008 | Hitachi DZ-MV230A DVD Camcorder

1 Answer

How do you transfer


You need a capture card already in your computer (or a simply IEEE 1394 or a USB 2.0 port) depending on the quality of video you want. Then you need a capture program. For a low price, b ut still decent quality program you can use Adobe's Premiere. I like Premiere because it's VERY user friendly and a quick learning curve. Once you have the video captured (be sure you have enough disk space on your HDD (I have 4TB in external drives for video editing)) edit it how you want the final product to look, export the video to an AVI, open your Authoring program (I suggest 2 different angles: 1 (for EASY) either WinAVI or Nero VIsion, super simple program but the quality is lacking, or 2 (for the creative) Adobe Encore, high quality but it takes a little time to learn the software. Create a DVD Folder from Encore or any authoring software, burn thr folder using your Burn Software (i like Nero 7). Boom, you have a DVD.

May 07, 2008 | Samsung SC-D353 Mini DV Digital Camcorder

5 Answers

JVC GR-D295US video recording downloads to PC


u will need the software form website latest verison ok jvc.com then driver download area for yourmodel save to hard drive then install then u can tranfer thx nick

Feb 04, 2008 | JVC Cybercam GR-DX75 Mini DV Digital...

3 Answers

VOB files on vista


You have to change it to supported format such as avi or mpg.
Means, you have to "rip" your video.
I use Xilisoft DVD ripper.
But you can try other software.
This one is free:
http://www.freedownloadscenter.com/Multimedia_and_Graphics/Video_and_Animation_Tools/Super_DVD_VOB_Converter.html

Dec 02, 2007 | Canon DC20 DVD Camcorder

2 Answers

Transfering VRO to MPEG files.


Nero can read these tpes of files - select all files on the make a movie part of nero - export as an mpeg

Jan 03, 2007 | Hitachi DZ-MV550 DVD Camcorder

Not finding what you are looking for?
JVC Everio GZ-MG30US Camcorder Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

Shekar Avadhani

Level 2 Expert

60 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...