Question about Hoover Plus U5435-900 Bagged Upright Vacuum
Picked a good value hoover at a garage sale but I cannot work out how to get the tools to work? Is there anywhere I can download a manual?
Or can you tell me where the button is for this model. Got an older hoover with a slide that when positioned to the left sucks through the tools but for the life of me I cannot find anything that has a tools position.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Things to check: Check again that the pipes aren't clogged. Check all the way through from where the muck goes in to where it's supposed to end up, paying particular attention to places where the pipe narrows, goes round a bend, or changes material. Check the machine doesn't just need emptying. Wet/dry machines usually have some sort of float operated stop valve to stop you flooding the motor when you've filled it with water. Make sure this isn't stuck shut. Check everything from the impellor right back to where the muck goes in is airtight. It doesn't take a huge hole to lose you a lot of suction. Pay particular attention to places that are meant to come apart routinely, and places where hoses join to hard fittings. If in doubt, run the machine and listen for sucking noises. If there's a filter between the fan and the air outlet (there usually is) make sure it is clean Assuming the motor is running, check it is turning the fan impeller. Hopefully, one or other of these will get you somewhere. A.
Posted on Apr 06, 2007
SOURCE: Hoover model 5906-900 spinscrub
I had the same problem. Turned out to be so simple. Look down at the machine. On the right is the green spiral to indicate the wheels are turning. Right above that is a cover that can be popped off to allow access to a small filter. If the filter is blocked, air intake is blocked, and the brushes will not turn. Mine was clogged. Took the 2 seconds to remove the material and the machine was fixed!
Posted on Aug 04, 2007
SOURCE: hoover steamvac model #F5857-900
Is the lid for the tank locked on all the way round? The filter on the underside of this lid should have a 1/4 gap from the lid to the top of the filter. Is the duct in place, front of the tank. Any of these will cause the problem.
Posted on Feb 14, 2008
I tried hoover.com, none came up for this model.
We're sorry, we were not able to find any models when searching with "f5857-900". Please check the model number, and if you are still not able to find any results, contact our customer service department at 1.330.499.9499.
Posted on May 22, 2008
Tips for a great answer:
Jul 19, 2015 | Hoover Vacuums
Nov 10, 2013 | Numatic Henry Bagged Canister Vacuum
Oct 12, 2009 | Hoover F5835900 Upright Steam Vacuum
May 13, 2009 | Hoover SteamVac Carpet/Upholstery Deep...
Mar 04, 2009 | Hoover F5870-900 SteamVac Vacuum
Jan 20, 2009 | Hoover F6020-900 SteamVac Upright Vacuum
Nov 17, 2008 | Hoover Vacuums
36 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: