Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Answer if this is the case how would i fix it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,028 Answers

Timer replacement is only solution ..remove 2 screws at bottom rear of console lift front of console up and roll back

Posted on Jun 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Error code on Bosch washer


Just fixed the E:27 error code. Just turn dial to off and hold down delayed start button and spin selector button and turn dial to the left one click (cold). It should then click and open. open the door and turn back to off. Everything should go back to normal. this is something that should have been in the manual.

Feb 03, 2013 | Bosch WFVC5400UC Washer

1 Answer

Do you have to pay if the advice received failed to fix the problem?


If you reject a premium answer you don't pay. You only pay if you formally accept a solution or if you take no further action in which case it's eventually assumed that you had a satisfactory answer.

This question is in the free section, so you don't pay either way

Feb 26, 2011 | Washing Machines

1 Answer

It makes a metallic scraping sound during the wash cycle


NOT A SOLUTION BUT THE ANSWER. IN MY CASE THE SCRQAPING IS COMING FROM A BRACKET UNDER THE TRANSMISSION, SCRAPING THE BASE. I AM TOO LOOKING FOR A SOLUTION, I BELIEVE RAISING THE BASKET IS THE ANSWER.

Jan 04, 2010 | GE Profile WPRE6100G Top Load Washer

3 Answers

How do i reset my kenmore he 2 washer


Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:

* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 03, 2010 | Kenmore HE2 Plus Front Load Washer

2 Answers

The washing machine leaked all over the floor. Should I get it fixed? It is 10 years old.


It may be a hose or a pump leak. If you are a do it yourselfer, repair it. If you would have to hire it repaired, it depends on the repair. Hose about $17.00. Pump About $50.00. Labor estimate for either about $95.00 to $120.00. New machine $450.00 to $1000.00. Some repair shops may give you an estimate over the phone.

Aug 24, 2009 | Washing Machines

1 Answer

Washer will not fill in rinse cycle.


hi, When the washer acts up in the rinse cycle, will it try and fill and then the water starts going out the drain hose? If this is the case, the drain hose is either needs to be raised to be as high as the top of the washer or, it needs to have a loose fitting where it goes into the drain pipe so it can have air **** back into the drain hose after it releases the wash water.
i know this is a lot of info that might not even be the answer but, I am giving you the most common fix. Please let me know if I have answered your question or let me know if I can assist you further.
If this does not seem to be the answer, maybe I need clarification.
Vic

Jul 12, 2009 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

2 Answers

MY WASHER DOESN'T SPIN CLOTH OUT


99% of all problems are a clogged filter and pump

Jul 06, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Indesit washing machine wd10uk


Hi, you will have to remove the door seal fastener first, the just push the door seal inside the drum.

Mar 30, 2008 | Indesit WA 115 Front Load Washer

1 Answer

Kenmore washer


More than likely, you have lost your basket drive and clutch system. Its a pretty detailed job, having to remove the baskets, transmission, etc. Not usually a fix-it-yourself type repair unless you are really handy and have a decent amount of tools. The basket drive usually runs around $100.00, clutch kit around $40.00. Service charges could be from the low $70's to above $200.00 (Sears) in some cases. Let me know if this helped you out, or if you need further help. Thanks and good luck!!!!

Feb 14, 2008 | Kenmore 3.2 cu. ft. Plus Top Load Washer

3 Answers

Bosch Maxx WFL 2850 - the drum will not turn around


hi there sounds like a simple case of worn carbons cost about a £10

Jan 11, 2008 | Bosch Exxcel WVT 2850 Front Load Washer /...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...