Epson c1100 service required e511 prompt

Part of the photoconductor unit known as the transfer belt is not being detected when the E511 Service Requested error comes up. Epson in the UK has the troubleshooting outlined here:

http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support;jsessionid=035E9EA2127A8A5A478481112D9F98B2.acc2?target=article&extn=.html&articleId=1319

Error E511 is due to ur photoconductor.. the black transfer belt is out of position... it can be corrected if you know how to open up the photoconductor unit...

The e511 error is to do with the PCU. Please see the following Epson knowledge base article.
http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support?target=article&extn=.html&articleId=1319

The "Service Req E511" error message means that part of the photoconductor unit called the transfer belt is not being detected. See the following Epson Article which may help. http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support?target=article&extn=.html&articleId=1319

The "Service Req E511" error message means that part of the photoconductor unit called the transfer belt is not being detected. Please see the following Epson article which may help. http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Aculaser-C1100/Drivers-Support?target=article&extn=.html&articleId=1319

The E511 error for your Epson Aculaser  in most cases means that its motor has malfunctioned or something is preventing the motor from working properly.

Hi,

To my knowledge Error Code E511 refers to photoconductor and/or its associated components. It is possible that:

• the photoconductor requires a bit of cleaning and to be reseated snugly;
• the black rubber conveyor (transfer) belt inside the photoconductor moved away from its path;
• the silver square reflector on the transfer belt needs cleaning;

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Yes I can.

See my previous E511 post HERE

Errrrmmmm, how about you tell us what the problem is.


Bloke walks into the doctor surgery and says "Doctor, help me I'm ill" the doctor asks "What is wrong with you?" to which the patient replys "You're the doctor, you tell me"!

See the answer I have posted. Regards