Question about Dryers

1 Answer

How to fix a pully on kenmore dryer - Dryers

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 161 Answers

Don't try to fix the pulley , replace it along with the belt and drum support rollers while you have it apart. Parts will only cost around 25 dollars. The package the belt and pulley come in will have diagrams. The pulley just fits in slots in the bottom and belt tension holds it in place.

Posted on Jun 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The belt for the dryer is not in place and the dryer is not longer spinning. how would i fix that? There is also a piece with a wheel on it that i cannot figure out where it goes but looks as though it is...


Look up "Tension Pully & Belt Diagram" on internet for your dryer on google or Dogpile. You should be able to find how to
put the Tension Pully back where it belongs & how to thread the belt through it and back on to the motor drive shaft. Check different sites for the right picture for your dryer. Here's a picture to get you started. Good luck,
Vinnie04892da.jpg

Sep 13, 2010 | Kenmore 500 6952 Dryer

1 Answer

How do you rehook the belt up for the drum


tricky but belt around drum then pully tensioner at bottom of dryer the belt feeds through pully then onto motor gotta move pully while putting belt on motor take s some practice kinda hard to expain

Aug 19, 2010 | Kenmore 63942 Dryer

1 Answer

Where is the motor in a 62802 Kenmore clothes dryer. The dryer makes a humming noise but the drum won't turn. The belt is intact but not real tight around the drum. I can't locate the motor and pully. How...


You'll need to remove the top lid then the front panel.. on the bottom right of the cabinet you'll find the pulley which sounds like the problem the motor is right there behind the pulley...Good Luck

Apr 19, 2010 | Kenmore 62802 Electric Dryer

1 Answer

Cant install my belt back on my idler pully on my kenmore 80 series dryer . the idler pully i have is a piece of metal below but it does not open up so the belt will go through. i am missing something but...


Howdy: Check for the bolts that hold the pully on. Loosen the bolts and the pully should stat to open. You may have to put on the belt then install the pully. Look close at it. Good luck - Doug

Dec 09, 2009 | Kenmore Dryers

1 Answer

Is there an adjustment on the kenmore 4179172000


The thing that you should now when taking on a repair on a "skyscraper" like thses, is that they are a monster to repair!! There is no "adjustment". The manufacturer (Whirlpool from the looks of your Model #) has a "fixed" tension on these units so they cannot be tampered with. You would need to purchase a repair manual that matches the unit you have to take you step-by-step. Plus, you can't just go by the size. The belt has to be ABSOLUTELY EXACT as the original. Did you get the belt from Sears or a third-party?

Dec 05, 2009 | Kenmore 62602 Electric Dryer

1 Answer

HOW DO U PUT A BELT ON A KENMORE DYER


You,ve got to flip it over and loosen the tension pully. The old belt should come off, then replace the belt and tighten the belt with the pully by moving it over.

Nov 27, 2009 | Kenmore 63942 Dryer

1 Answer

Tention pulley or so i think


it goes in front of the motor,you'll see the slots in the cabinet under the motor,both side of the belt go under the pully and onto the motor pully-mike

Dec 14, 2008 | Kenmore 62602 Electric Dryer

1 Answer

Dryer squelles


the sound is thr support rollers or the idler pully, the support rollers located under the drum to the back the pully holds the belt tight. look for meatle shavings or rust dust on rollers.

Jul 14, 2008 | Maytag Neptune MDE4000 Electric Dryer

1 Answer

Kenmore dryer


The pully fits in some groves at the bottom of the motor shaft , the pic should help 9b7b31e.gif

Oct 13, 2007 | Kenmore 64952 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...