Question about Pioneer Premier DEH-P480MP CD Player

2 Answers

Cannot get Aux to display after new battery installed in vehicle

Everything was working okay before installing a new battery. Function button will not cycle to Aux to play ipod. Manual seemed to indicate we needed to associate ipod with Aux1 again. Tried to start with "initial" on display to be sure we were in "initial setting" mode, but powering off and on with Source knob does not display "inital". Any help would be appreciated.

Posted by on

  • 1 more comment 
  • Anonymous Sep 27, 2008

    Yeah Mine worked fine until my battery in my car went out and now the aux 1 input does not work. I looked to make sure everything was plugged in properly and everything is as it was before it stopped working.

  • jcrossin Oct 20, 2008

    anyone have an update for this yet? i have the same problem.

  • Anonymous Nov 10, 2008

    same problem

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Thanks to missmis44 i have the answer-----To change your intial settings turn off the stereo, then hold down source butten until clock starts flashing then press the function button which will allow you to turn on aux settings.

mine works just as before

Posted on May 09, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

This is easy, Press in and hold the function button and the volume dial,.. after the function menu comes up press function again to get to Aux off.. press up to get it to Aux 1 and then press in the volume dial again and youre set!

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a Pioneer DEH-P5200 and i plugged the aux chords in the back to my ipod but dont know how to switch to the aux mode on radio...


OK - had the same problem and got it finally figured out. Power the unit on the ignition key. Press and hold the source button so the unit shuts off. With the unit shut off press and hold the function button (the key is to hold the function button down) The clock, aux etc will show on the screen. Press (but do not hold) the function button and it will move to each function. When you get to the AUX press the ^ button and the will switch the AUX to "on". Once you know, like everything else, it's pretty easy.

Nov 29, 2010 | Pioneer DEH-P5200 CD Player

1 Answer

Need a manual- Pioneer DEH-P440


ok, i dug up my old manual and i guess i was wrong,

straight from the book:
1 Press FUNCTION to select AUX.
Press FUNCTION repeatedly until AUX appears
in the display.
2 Select AUX on or off with ^/v.
Pressing ^/v will switch AUX between on and
off and that status will be displayed (e.g.,
AUX :ON).

and as for t-scan: T-Scan play lets you hear the first 10 seconds of each track on the CD.

Apr 29, 2010 | Pioneer DEH-P440 CD Player

2 Answers

I have a pioneer super tuner III D 50 w x 4 and i cant get the AUX input to work please help


turn the unit off by pressing and holding the off button. The only thing that should be showing then is the time. Then, press and hold the function buttion. This should display the setup menu. Scroll through the menu by pressing the function button (I think). "Aux" should show up and then press up/down or left/right (not sure again). When it says Aux on or yes, turn the unit back on. Press the "source" button until you get to AUX.

Jan 03, 2010 | Pioneer DEH-P4800MP CD Player

1 Answer

Can not get stereo in aux mode


it sounds like they've disconnected the battery on you and reset the unit.with the unit powered up (key on) If you turn off the radio by holding the source button then press and hold the function button (the round one that adjusts the volume) it takes a few seconds.......Note if you turn or move it up down or to either side it won't work. the menu will come up to change various settings including turning on the aux function.
Hope this helps!

Jan 16, 2009 | Pioneer Premier DEH-P580MP CD Player

1 Answer

Put in new car battery, now can't get aux to work


Hi there
hold down the source button to turn off the unit (unit must be off)
now hold down the function button till it beeps once it has done this press the function button i think 3 or 4 times and you will get a message on your deck unit saying (aux - on,off) turn on and press the source button to turn the unit back on to the CD or radio now press source button2 or 3 times till Aux shows up (press means push it let it go) (hold means don't take your finger off button)
hope this solves your problem

Oct 11, 2008 | Pioneer DEH-P4700MP CD Player

3 Answers

My Aux-in wont work


did you turned aux function?

turn off your player by pressing and holding volume controler.
press and hold longer (~5 sec) it again to turn it on (you should see 'tuner' in the lcd).
push up arrow to select aux and right/left to turn it on.

now you can connect your ipod and select aux (as ussual switching between tuner/cd player/aux)

cheers :)

Aug 22, 2008 | Pioneer DEH-30MP CD Player

3 Answers

I have a pioneer DEH-P3000


Hi nhmteam. I have the solution for you: 1. With your DEH-P3000 turned off, press your FUNCtion button. It's a tiny button towards the upper right of the faceplate. Hold it down until you "ALARM OFF" or "ALARM ON" on the display. Release the button. 2. Press the FUNCtion button again and you should see another feature. I don't remember how many features you need to cycle through, but keep releasing and pressing the FUNCtion button until you see "M-CD ON" on the display. If you miss it just keep going and eventually it will come back. 3. On the right side of your faceplate there is a button with 4 arrows. You will need to push the up or down arrow until the display reads "M-CD OFF". If your display already reads "M-CD OFF", kip to the next step. 4. Press and release the FUNCtion button again and you should see "AUX OFF" on the display. Again press the up or down arrow until the display reads "AUX ON". 5. Now, turn on your unit, then press the INPUT button until the display reads "AUX". You are now ready to use your iPod in the way you always did. Keep these instructions for the future since I believe every time you disconnect the unit from the battery the unit will reset itself and disable your iPod cord. Best regards - TomR

Aug 30, 2007 | Pioneer DEH-P3000 CD Player

5 Answers

AUX inputs


Turn the ignition key to on or accessory position, turn the stereo off, then hold the function key for a couple seconds, the stereo will turn on and you scroll through the menu with the left and right arrow buttons and change settings with the up and down buttons

Feb 25, 2007 | Pioneer DEH-P6800MP CD Player

1 Answer

Eclipse CD8445


make sure that the additional box is hooked up to the cable, or else the display will not function

Oct 16, 2006 | Eclipse CD8445 CD/MP3/WMA Receiver

Not finding what you are looking for?
Pioneer Premier DEH-P480MP CD Player Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60769 Answers

Are you a Pioneer Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...