Question about Nintendo Wii Console

1 Answer

Wii fit I can't figure out how to add another remote so that two peeople can do the 2 person run on the Wii fit game. You select 2 person run, then it tells you that you need another remote, but there doesn't seem to be anywhere to add another remote. We tried holding down the 1 and 2 buttons together for a few seconds, but nothing worked. Please help?

Posted by on

  • PackerGuy Jun 23, 2008

    I have the same problem. Haven't been able to figure it out.

  • chasemaj Aug 12, 2008

    My console for wii fit won't remain on after sync mode.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have had this problem before with wii sports. What I did was turn off the wii console and unplug from the power, leave for a few seconds then turn it back on when the health & safety screen comes up

  1. Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.


  2. Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

  3. After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:
  4. With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

  5. Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

  6. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).

  7. When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

Posted on Jun 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2nd Wii remote not recognised when reconnecting to add player 2 on Donkey Kong. Player 2 LED comes on when resync completes but goes off when game starts.


You said when if the game starts the controller goes off.try holding the sync button on the wii console for 15-20 seconds then resync all controllers.If it doesn't work try this:Start the donkey kong game then press the home button then go to the wii remote settings it has an icon of a remote then after you enter it find the reconnect then press 1-2 simultaneously to select who is the first player.If it doesn't work try resynchronizing it as the first controller.Hope this helps.

Apr 15, 2011 | Video Game Consoles

1 Answer

How can i re connect the wii fit balance board to my wii ?


Synching can be completed only if a compatible game disc is running in the console. Compatible game discs (such as Wii Fit) will display the Wii Balance Board icon on their packaging.
The Wii Balance Board must be synced to each compatible game individually.
These sync settings will be saved even after the console is turned off.

Follow these directions to sync the Wii Balance Board (so that it is recognized by the Wii console):

Insert a Wii Balance Board compatible game disc (such as Wii Fit) in the Wii console.


Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game.

Open the SD Card slot cover on the front of the Wii console.

Remove the Battery Cover on the bottom of the Wii Balance Board.

Press and release the SYNC button on the Wii Balance Board. The Power LED on the board will start blinking.

Press and release the SYNC button on the console while the Power LED on the board is still blinking.

The Power LED will stop blinking and light steadily once the synchronization is complete.

Mar 16, 2011 | Nintendo Wii Console

1 Answer

How do u delete people from wii fit plus!? ive deleted them as a mii but guests took there places and i want to add me dad and bff


To delete a Wii Fit character, select the character you wish to delete in the wii fit screen. Your options should be next to them in the performance graph. One of the options there will delete them from the game.
Deleting the Mii character only deletes the Mii, but the personal data remains for each game.

Feb 27, 2011 | Nintendo Wii Console

1 Answer

How do I add a new mii to my wii fit challenge?


Click the shadow of a person with the + sign and choose a Mii from your Mii Plaza, you could only have up to eight Mii registered on wii Fit per Wii.

Jan 04, 2011 | Video Game Consoles

1 Answer

I can not re start my nintendo balance board,


1. Insert a Wii Balance Board compatible game disc in the Wii console.

2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

3. Open the small SD Card slot cover on the front of the Wii console.

4. Remove the Battery Cover on the bottom of the Wii Balance Board.

5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.

6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.

7. The blue light will stop blinking and stay on steady once the syncronization is complete

Dec 20, 2010 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

Why are my remotes not working


dont have a wii fit but, try to reconnect the remotes by pressing the button with the blue house on it on the wii remote, and pull up the wii remote settings. then, press the reconnect button on the remote and follow the directions. if that doesnt work, open the battery compartment on the remote and when the wii is on, press the red button inside the battery compartment on the wii remote that says SYNC. if that doesnt work, try the SYNC. button inside the wii itself. (located in the door in the FRONT of the wii. it has a spot for an SD (scandisk) memory card) it is a rectangular bigger button than the wiii remote. even if none of these options work THANKS FOR READING

Apr 19, 2009 | Nintendo Wii Console

1 Answer

Wii frezees after inserting Wii Fit Disc!!


You may check out Wii Fix Guide to fix the problem yourself. This DIY guide will show step by step pictures to fix the problems yourself without any technical knowledge.

Dec 06, 2008 | Nintendo Wii Console

3 Answers

Nintendo Wii box light is on but no picture or sound from my tv


sometimes just sometimes tvs are funny, some tv's call it a "input select" others call it a "mode" or simply "input" and some dont have any they just want you to goto channel 2 on the tv and go back one more channel.

ushally all these modes are listed on the remote.

is it the origional remote? or is it a universal remote.

try those things above look over the remote again see if anything resembles any of that and if not

list the make and model of your tv and if your using a universal remote we will be able to figure something out for you.

Aug 12, 2008 | Nintendo Wii Console

1 Answer

Wii fit


are you able to get any of your controllers to connect? if not it could be a issue with your sensor bar. please provide a bit more info

but try this first

Synchronizing the Wii Balance Board with your Wii Console
IMPORTANT: To operate correctly, the Wii Balance Board must be synchronized with the Wii console using Standard Mode Synchronization. Follow the steps below to synchronize the board to the console.
  • This procedure must be followed for each Wii Balance Board compatible Game Disc.
  • These synchronization settings will be saved even if the console is turned off.
  • This procedure can be completed only if a compatible Game Disc is running in the console.
  1. Press the EJECT Button on the front of the Wii console and remove any
    game disc if necessary. Insert a Wii Balance Board compatible Game Disc.
  2. Use the Wii Remote to select the Disc Channel on the Wii Menu screen and select START.
  3. Open the SD Card slot cover on the front of the Wii console.
    NOTE: Close the SD Card slot cover when you are finished with the synchronization procedure.
  4. Remove the Battery Cover on the bottom of the Wii Balance Board.
    NOTE: Replace the Battery Cover when you are finished with the aynchronization procedure.
  5. Press the SYNCHRO Button (SYNC.) on the Wii Balance Board. The Power LED on the board will start blinking (for up to about 20 seconds).
Press the SYNCHRO Button (SYNC.) on the console while the Power LED on the board is blinking.
  1. IMPORTANT: Do not press and hold the SYNCHRO Button on the Wii console down for more than 10 seconds. This will delete all of the Standard Mode synchronization information for all Wii Remotes that you use with that console.
  2. The Power LED will stop blinking and light steadily once the synchronization is
    complete. You are now ready to play the Wii Balance Board compatible Game Disc. Please refer to the instruction booklet for the Game Disc you are using for further information on gameplay.
  • Only one Wii Balance Board can be synchronized to a Wii console at a time. Up to a total of 10 Wii Remotes and accessories can be synchronized to a console at any time with the Standard Mode procedure. If additional synchronizations are made, the oldest existing ones will be overwritten.
  • The Wii Balance Board can only be synchronized to one console at a time using the Standard Mode procedure. If you change the console you are using the board with, you will have to repeat the synchronization procedure each time.
  • The Wii Balance Board uses the Player 4 (P4) connection. If a Wii Remote is actively using P4, that remote will be disconnected while the board is being used.

Aug 01, 2008 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo Wii Console Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles Experts

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

phil

Level 2 Expert

567 Answers

Raj Patel

Level 3 Expert

845 Answers

Are you a Nintendo Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...