Question about Car Audio Receivers

Open Question

Kenwood ddx-7039 stuck in demo mode

I cant seem to get this unit out of demo mode.
Thanx

Posted by on

  • Anonymous Jan 22, 2009

    yeah i know


×

6 Suggested Answers

JMuskovitz
  • 135 Answers

SOURCE: demo mode problem

From the user's manual (pg.23): 1. Select the Demonstration Mode. Push the Control knob towards [FM] or [AM]. Select the "DEMO" display. 2. Set the Demonstration Mode. Press the Control knob for at least 2 seconds.

Posted on Feb 16, 2007

  • 14 Answers

SOURCE: Cant turn off the demo mode

There is often confusion in the way the manual states how to achieve removing demo mode. Because this is listed in the "Menu System" section of the manual and assumes you read from page 1 of the manual that you will know to enter the menu in this section of the manual. Here is step by step instructions on removing demo mode on your unit. 1. Go to standby mode 2. Press and hold the menu button till the menu comes up 3. Press control knob towards AM or FM to scroll through menu till you locate "Demo On" 4. Press control knob straight in for approximately 3 seconds till it switches to "Demo Off" 5. Hit menu button again to exit menu

Posted on May 07, 2007

  • 78 Answers

SOURCE: Kenwood KDC-MP635 STUCK IN DEMO MODE

Turn the unit onto standby then press and hold the menu button then scroll down to demo using the toggle switch on the right then press and hold the toggle switch for a few seconds and it will change to demo off. It's not too difficult but you are correct, it doesn't tell you correctly in the installation instructions.

Posted on Jan 25, 2008

Hazardsneon
  • 100 Answers

SOURCE: Stuck in demo mode

When you are in STANDBY mode hold the menu button for a few seconds and a special menu should pop up. In this menu you should be able to set the clock, turn off or on the beep, and take your unit out of demo mode. Good luck.
-Andrew Hawkins

Posted on Apr 14, 2008

  • 101 Answers

SOURCE: Aiwa CDC-X504Mp stuck in demo mode

This recently happened to my Sony, maybe it will help u

If this cd player has a removal fascia then try..

Carefully inspect the the electrical contacts on the fasica and the cd player. If it has got dirt on them then CAREFULLY CAREFULLY clean with cotton swab dabbed in cleaning Alcohol.



Posted on Jan 09, 2009

  • 1 Answer

SOURCE: Problem with Demo mode turning off Kenwood KDC-WF431

Hello. Have the same problem. Have just downloaded the Manual in German. It says In Standby Mode use the small joystick up to FM or AM till it says DEMO OFF and then press the small joystick for 2 Seconds. Hope this helps.

Paul

Posted on Aug 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kenwood kdu-u7053bt won't keep it's memeroy. Keep going to demo mode when I turn the car on.


go back to the stereo shop and make sure they connected the memory wire on the unit to a constant 12v source

Feb 03, 2013 | Kenwood Car Audio Receivers

1 Answer

Cant turnoff the demo mode in my Kenwood KDC-MP142 stereo


get in to "menu" (hold magnifying glass), scroll to "demo mode" (am or fm button), push volume knob in and hold for about three seconds. Should work, that's how I did it.

Jul 15, 2010 | Kenwood KDC-MP142 Car CD/ MP3 Player

1 Answer

Kenwood excelon kdc-x589 demo mode makes me mad


CLICK HERE for your owners manual in PDF format.

Cancelling the DEMO MODE is explained on page 29... as follows....

Select the Demonstration mode
Push the Control knob to [FM] or [AM].
Select the "DEMO" display.


Set the Demonstration mode
Press the Control knob for at least 2 seconds.
Each time the knob is pressed at least 2 seconds,
the Demonstration mode switches "on" or "off"


Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 21, 2009 | Kenwood KDC-X589 CD Player

1 Answer

Cant turn off demo mode


CLICK HERE for your manual in PDF format.


Hold down button [5] and press the Reset
button to release the Demonstration mode.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Apr 26, 2009 | Kenwood eXcelon KDC-X879 CD Player

1 Answer

Kenwood kdc mp235 cant get it out of demo mode


you have to be in standby mode, thats the key, i had the same problem, just go to "demo on" and change it to "demo off"

Sep 11, 2008 | Kenwood KDC-MP235 CD Player

1 Answer

Kenwood KDC-MP635 STUCK IN DEMO MODE


Turn the unit onto standby then press and hold the menu button then scroll down to demo using the toggle switch on the right then press and hold the toggle switch for a few seconds and it will change to demo off. It's not too difficult but you are correct, it doesn't tell you correctly in the installation instructions.

Jan 25, 2008 | Kenwood KDC-MP635 CD Player

1 Answer

Cant get the unit out of Demo Mode


I had the same problem and I called 1-800-KENWOOD. There is a button to the left of your preset station buttons and it is the menu button. It is also the B.Boost button. When in standby mode, press this Menu button and hold it for a second or so and the menu will appear. The manual conveinently left this part out. Once you hold that button you can then move the control knob up or down till it comes to DEMO and then hold the control knob down for 2 seconds to change it from DEMO mode, like the manual tells you to. They always leave out the most important part. This MENU button will be your friend from now on, and it also goes to the option that will set the clock. The people at 1-800-KENWOOD were very helpful should you need more assistance. Good luck!

Dec 05, 2007 | Kenwood KDC-MP335 CD Player

3 Answers

The "Demo Mode" won't stop!!


Press the Source button until the unit enters Standby mode. Then press and hold the Menu button. Scrolling through the menu functions, you should come to one that says "demo". Turn it off by pressing and holding the 4-way knob.

Jul 26, 2007 | Kenwood KDC-MP3035 CD Player

1 Answer

Cant turn off the demo mode


There is often confusion in the way the manual states how to achieve removing demo mode. Because this is listed in the "Menu System" section of the manual and assumes you read from page 1 of the manual that you will know to enter the menu in this section of the manual. Here is step by step instructions on removing demo mode on your unit. 1. Go to standby mode 2. Press and hold the menu button till the menu comes up 3. Press control knob towards AM or FM to scroll through menu till you locate "Demo On" 4. Press control knob straight in for approximately 3 seconds till it switches to "Demo Off" 5. Hit menu button again to exit menu

Apr 05, 2007 | Kenwood KDC-MP732 CD Player

1 Answer

Demo mode problem


From the user's manual (pg.23): 1. Select the Demonstration Mode. Push the Control knob towards [FM] or [AM]. Select the "DEMO" display. 2. Set the Demonstration Mode. Press the Control knob for at least 2 seconds.

Feb 13, 2007 | Kenwood KDC-MP232 CD Player

Not finding what you are looking for?
Car Audio Receivers Logo

Related Topics:

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...