Question about Computers & Internet

1 Answer

Bugcode/bluescreen problem hello, thank-u for ur reply, i don't quite understand bios, and some of the other answers u gave , so if u could explain how i can fix this problem alittle more easier thank-you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 67 Answers

OK ,
There are following reason to occuring this problem :-
1>Some files are your operating system has been currepted
2>Ram is faulty

Trouble shooting steps :-
1>>> Restart your machine and press F8 (4-5 times )after system logo and goto in safe mode and play your system in safe mode 30 min and check it .
2>>> Restart your machine press delete and go to setup (blue color screen would be apear ) after that press key F9 after that its asking for yes or no you need to press y after that press F10 and after that save and exit .
And after that your machine would be restart and check it
>>> If your problem problem has been solved then well n good if it same then need to replace RAM .

Posted on Jun 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is Fixya no bloody good at answering questions when you advertise you can answer questions


Sorry. I\'m from Europe, know things about electronics and computers but I don\'t drive a Kawasaki GTR 1000. Lots of questions about electronics, camera\'s, computers phones and operating systems I try to answer. For the more than 2000 answers I gave I got lots and lots of thanks, but I never got one penny. All the people who try to answer questions, do this for free. They at least have the standard they don\'t try to sell crap or don\'t answer things they don\'t have any idea from.

If none of all the volunteers has (or has had) a Kawasaki GTR 1000 it is not likely anyone can answer this question. I do have some manuals, yes even service manuals of motor bikes, but not one from Kawasaki, so I even can\'t look up what I could answer to your question.

I think one call to a place where they sell Kawasaki cam tell you what oil you need. They perhaps even have it in stock. But not knowing any motor home close to me, I do not make such a call.



I hope you understand all the volunteers here do their best, but can\'t answer all questions. I do have to admit your questions are very clear and better to understand than lots of other questions, but we (till now) don\'t have an answer.

Again Sorry.

Jun 26, 2014 | 1989 kawasaki GTR 1000

Tip

This is to Dageezer as a guru you gave a generic answer, of course I know to...


This is the response from Acer America Tech support about removing a lost BIOS password:
Thank you for contacting Acer America. I apologize for the delay in responding to your inquiry. In order to have the BIOS or hard disk password removed (This include any biometric security), the notebook will need to come in to our repair depot for password removal. This service is not covered by warranty and unfortunately there is no other recourse to remove a BIOS or HDD password from the notebook. The flat fee for BIOS password removal is $100.00 US dollars plus tax. If it is a BIOS or HDD password and you would like us to service it for you, please contact our telephone technical support line at 1-800-816-2237. Hours of operation are 7am-9pm CST Monday-Friday and 8am-5pm CST Saturday and Sunday, excluding holidays.

on Jun 26, 2010 | Computers & Internet

1 Answer

I have a provlem with fax on the HP LASERJET M1522nf


I have problem with my MFP 1522nf Printer I cant recieve fax on incomming call it is quite dead while It is set in automatillay answer mode when I dial it dial and gives tone but while in comming call no rings no reply ring answer mode is 1 but quite I checked every way settings wires but cant understand can any one know about this and help me.

My email gujjal@hotmail.com
Thank you

Mar 30, 2011 | HP LaserJet M1522nf Multifunction Printer...

1 Answer

I can not find Gimp Manual on line and I do not know to use the Gimp program for put my picture on paisaje back


GIMP has a built in help system, however a manual is available for download in your choice of languages. This same link also points to tutorials, books, and FAQs.


I don't quite understand the second part of your problem:

"I do not know to use the Gimp program for put my picture on paisaje back"

If the link above doesn't provide an answer - could explain a bit more? It would help me a great deal to help get you the info you're looking for.

I hope this helps & good luck! Please rate my reply - thanks!

Jan 27, 2011 | Computers & Internet

1 Answer

I need a oner manual for a Master Bilt BLG- 74 that i bought used' I don;t know how any controls work, defrost timer etc. Thanks Ralph


This was very difficult to find, but I found it just for you! Please make sure you rate my answer 4 thumbs up! Thanks so much for understanding, it would be a huge help to me. I would be forever grateful if you could do this for me. To view the manual you will need adobe reader, which you can get for free from http://get.adobe.com/reader/ You probably already have it though, please try opening the file first and find out. If you require some other manual, the file doesn't work, or this isn't what you are looking for PLEASE reply to my answer here and I will correct it for you. Here is the manual / guide please give it a few minutes the file is quite large:


http://www.master-bilt.com/pdfs/io_manuals/blg_tlg_m_dixell_io.pdf


Thanks,
Tim

Oct 16, 2010 | Refrigerators

1 Answer

My two small burners quit working and also my double burner the inside has quit as well. Can I open the top like older stove tops?


HELLO,

The answer to this question is yes.

But this answer is conditional, meaning that you will have to get your self the bass tools if needed and then apply your technical skills as the case may be

Do this with proper care and understanding of the range
Hope this help in any way ?

Thank you and thanks for using fixya.

Sep 10, 2010 | Kenmore Kitchen Ranges

2 Answers

Bios time and boot problem


friend there can only be 2 probs

1. you mb bios cell is dead, so just replace it

2. ur bios is not saving at all, get ur bios updated by a mb technician


thanks

Apr 11, 2009 | Dell Computers & Internet

1 Answer

Bugcode/bluescreen problem


Restart ur machine and goto bios and save load default after that press
F9 >YES>F10 >YES and exit and
check it
if its not solve then goto in safemode and check it
if problem is persist then your ram is faulty .

Jun 21, 2008 | Computers & Internet

1 Answer

PS2 Slim Line Prblem !!!


Lenses adjust their distance on ur disc, the harder they can read it, the nearer it goes on the disc...can it still read other discs? if it wont, then ur lens is damaged because of too much scratches, and if it does happen, u have no other choice but to repalce lenses...and by the way, there's an adjustment under these lenses that determines its distance on the disc, but before adjusting it, you should know what ur doing, coz it miht damage the lenses, again....

May 07, 2008 | Sony PlayStation 2 Slimline Console

2 Answers

Please Tell me, ASUS P4S8X-MX Problemn


First of all, try to reseat all the cables inside your computer just make sure there aren't any loose connections.

If that doesn't work you will have to reset your BIOS. (Follow the instructions in your motherboard manual.)

If even after resetting the BIOS the problem is not solved, you may have to replace your CMOS Battery.

Oct 18, 2007 | ASUS P4S8X-MX Motherboard

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...