Question about Dryers

1 Answer

Good afternoon I'm a bit confused???? I'm knee deep with a dryer repair, (Sears Kenmore model # 110 97292100 gas front loading dryer) and everything is disassembled in my garage. The belt broke - that turns the drum that rotates the clothes - and I bought the replacement belt from a Sears parts store (Part # 661570). The belt looks like it matches up the the same length as the broken one but when I go the put it on the pulley and motor pulley it's too long, having too much slack and seems too large. I feel it must threat through something else but don't know what??? Are you familiar with how to specifically thread this belt and where each contact points are (drum, motor pulley, etc...???). If anybody can give me an immediate response, it would be greatly appreciated. Thank you for your help and time. FRUSTRATED VS email: daddyskitchen5@sbcglobal.net

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 868 Answers

Its a bit frustrating to say the least just trying to explain this one,so I'll give you my best and with patience you'll get the belt on.Follow the picture below closely to get the idea of how the slack is made up. Please Rate This !!Good afternoon  I'm a - 10ff711.jpg

Posted on Jun 22, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Open front panel on kenmore 77902791 dryer


Hello Barry Bosik,

Depending on the controls location...
(I think yours is REAR... you have a PARTIAL Number)
Most DRYERS open pretty much the same...

Put masking tape on a putty knife...
(to protect you finish) and push the release spring...
>> About 1 1/2" (inches) from the corner at front
straight back ( do not PRY )... Lift the corner & repeat
the push & lift on the other corner.

ELSE
just watch the VIDEOs
... These folks like to remove the top
(I don't... if it is a belt or fan... I will go the EXTRA MILE
to rig rope or cord to hold the lid...

>> Tape the DOOR SHUT.
>> A couple more screws loosens top front leans out

Here you might want to snap a picture
of how the front BOTTOM keys together...

You must make sure
it is properly fitted during reassembly...!!

Rather than point you to my favorite sire
(I will include below)... I am going to direct
your to SEARS... searspartsdirect.com
(a bit on the $$$$ side).
Water Filters Lawn Garden Appliance Parts

Parts houses (SEARS included) now have VIDEO
help... Unlike the "STUFF" on the general internet
These REPAIR videos are a good and decent
representation of the work required...

appliancepartspros
http://www.appliancepartspros.com/whirlpool-drum-felt-seal-280114-ap3790434.html#autoplay

repairclinic
Kenmore Dryer Model 110 77902791 11077902791 110 77902791 Parts

3 videos
Kenmore Dryer Blower Wheel WP697772

partselect
Whirlpool 661570V Drive Belt PartSelect

Jun 08, 2017 | Kenmore Dryers

1 Answer

Sears Electric Dryer is flashing F01 What is wrong?


The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.
You can order a new control board from the Sears PartsDirect website.
http://www.searspartsdirect.com/partsdir...
Here's how to do it: http://media.fotki.com/1_p,wkwdftgtbkdgf...


Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Error code on dryer F01 - Kenmore Elite HE3 Dryer - iFixit

https://www.ifixit.com/.../Error+code+on+dryer+F01 Traduire cette page The F01 indicates a failed electronic machine control board. This error code can ... The Kenmore Elite HE3 is 7.2 cu. ft. capacity electric dryer by Kenmore.

Dryer Sears / Kenmore HE3 - F01 Error Code Main Circuit ...

2q==? 7:35 https://www.youtube.com/watch?v=eWqrn5klxm0 20 avr. 2015 - Ajout? par Jim Dandy Sears Kenmore Dryer Model HE3 - F01 Error Code. Main Circuit Board Repair - Electronic Control Board ...

Error code F1 on Kenmore HE2 electric dryer appeared ...

www.shopyourway.com > ... > Questions Traduire cette page Sears Kenmore HE2 electric dryer; model #11087571601. F1 error message appeared ... Power it back up and see if you still get the F01 error code. If not, then I ...

What does the error code F-01 mean on my Kenmore front ...

www.shopyourway.com > ... > Questions Traduire cette page By unplugging and plugging in the electrical cord, I got the dryer to work again. ... What does the error code F-01 mean on my Kenmore front loaded HE2 dryer? ... My kenmore washing machine 110.46462500 is flashing an error code F.01 ...

Feb 04, 2016 | Sears Kenmore Elite Electric Dryer 69278

1 Answer

I have a kenmore front load dryer that I purchased from sears, model#970c880872 the light comes on to say the door is open even when its closed


The door switch is defective or improperly installed. If it is still under warranty, Sears owes you a service call.

Oct 06, 2014 | Kenmore Dryers

3 Answers

I own a 1Q-Touch Front-Load Electrolux washing machine. The door won't open. What can I do?


Hello Elizabeth P Cochran - Try resetting the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and restart unit. If the door does not open, then it sounds like the washer is possibly experiencing a communication problem with the control board, wiring failure or faulty door lock. Contact a professional to move forward accurately to properly diagnose/repair unit.

Jan 15, 2013 | Electrolux EIED55HIW Electric Front Load...

1 Answer

Start switch not working


You will have to remove the back panel on the control console, to give you a better visual on the unit go to sears.com/parts and in the model # put your info in then click on control/top panel view. Good luck

Jan 09, 2009 | LG DLG3788W Gas Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brad Brown

Level 3 Expert

16406 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...