Question about Computers & Internet

1 Answer

Two Maxtor hard drives - Master 6Y080L0 and Slave 6K040L0 Jumper set as Master for the 80 and no jumper for the 40. These are the identical settings shown printed on both drives. I beleive the cable/ribbon is an 80 and it is connected to the Blue No.1 IDE socket on the ASRock Motherboard. Cable/ribbon connected - end to the Master (80) and middle to the Slave (40). This is recognised by the system BIOS etc and drives work correctly. Have also tested connection using jumpers for Cable Select which works equally correctly. Norton System Works however announces on Boot Up "Protection Attention - Access Denied Drive F:"

Posted by on

1 Answer

Essential you have one license allowed and it checks the primary HD via its 'utilities function', and only does a general scan of slave. Since you did not mention Norton version nor your OS general assist here. You might consider going into Options and having it scan both HDs, worked for me.

Posted on Jun 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i set the jumper when installing diamond max plus 9 80gb as a 2nd disk what does cs enabled mean thank you


CS means Cable Select .Parallel data cable have two conectors.If you set jumper set on CS ,in this way ,example,you have two HDD when you plug parallel data cable in middle connector ,1 Hard drive working like Master ,2 HDD work like slave,if you plug in last connector First HDD working like slave,second HDD Master.
http://www.tacktech.com/display.cfm?ttid=379

Aug 04, 2010 | Maxtor Hard Drive

1 Answer

Need jumper settings wd800 as Mast. & maxtor Dia.plus as slave??


To use the WD 800 as a master there must be no jumper attached to it.The maxtor has a diagram for the jumper and it MUST be set to slave not cable select.

Mar 24, 2010 | Maxtor DiamondMax Plus 9 160 GB Hard Drive

2 Answers

I want to add another hard drive and need to know how to set the jumpers on my maxtor 90645d3 please help.ty


if you want to boot from this drive, please set the jumper to the master position.

if this drive is for additional storage, please set the jumper to slave. and make sure 1st hard drive is set to master.

if this is the only drive in the system, please set the jumper to single or remove the jumper.

there will be a chart telling you which pins are for which setting in the jumper area, which is between the data plug and the power plug on the back of your HDD.

main thing that will cause drives to not work is 2 jumpers on the same cable and they both are set to the same thng.. i.e. master/master or slave/slave. also, if one is set to single drive it will likely bypass the slave drive.

Jan 25, 2010 | Maxtor Hard Drive

3 Answers

Maxtor hard drive jumper setting for model 6v200e0


4d1abc1.gif
here is a poster of Maxtors jumper settings for each kind of drive.

Nov 12, 2009 | Computers & Internet

2 Answers

I need jumper settings for maxtor n256 model 96147h6 i wish to run it as a slave pls help. thx


For use as slave there is no jumper connected. (Master on/slave off0

Oct 04, 2009 | Maxtor Hard Drive

1 Answer

Jumper settings for a maxtor N256 master with slave


Select the maxtor HDD as master by setting the Jumper to the extreme left of the hdd; i.e. next to the data cable.
Remove all jumpers from the other HDD which you want to put as slave.

Sep 02, 2009 | Maxtor DiamondMax 80 (96147H6) 61.4 GB...

1 Answer

Slave harddrive jumper settings


usualy its just one jumper if no jumper on maxtors becomes slave. jumper on 50 is master. if u use cable select.. on same ide another device must also be cable select.
if one is master other is slave on same ide.

Jul 15, 2008 | Maxtor Hard Drive

2 Answers

Slave pin settings


hi frined

remove your hard disk jumper & u r hard will be slave

Apr 12, 2008 | Maxtor 20.4GB 7200rpm ATA-100 HDD p/n...

1 Answer

Maxtor diamondmax plus 9 6y080l0


If you have you primary HDD set on Cable select, and the secondary HDD is set on anything other then Cable select (with the jumper settings on the back of the HDD) then there will be an error.. Also, if you primary is set to master/slave and the same for the secondary, it will cause problems.

Another thought, if one of your drives is SATA and the other IDE, if the IDE is set to master, there may be an issue as SATA HDD's will try to post as the master drive

Mar 24, 2008 | Maxtor Hard Drive

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...