Re: HOW DO YOU FINALIZE A DISK USING THE CANNOC DC210...
First you have to plug in the camcorder using the charger then you have to make sure that the play light is on,you do this by pushing the on and off switch down toward mode then you will see the green play light come on,next push the joystick in when you go to finalize,then make sure that the word yes is highlighted in orange push set and the finalization starts..if you have any questions just call cannon and they will walk you through the steps. that is what i did......good luck!!!!!!!!!!!!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
hi its geoff
first of all you must plug in the mains charger,it assumes theres not enough power in the battery regardless to how full the battery is. then the finalize option will be active in
I have a Samsung recorder, and it requires you to "finalize" the disc before it will play on another unit. Check your manual for specifics, or look in your menu for the "finalize disk" option. Hope this helps...
you need to have the mains lead in to do this, took me ages to find it in the manual, also put on a level surface and dont move it, you will get a prompt any way, same applies for unfinalise
1. turn it on
2. use cord.
3.move the on buttom to mode. it will show the recordings.
4. select a recording
5.press function butom. it will up bring several choices among "menu"
6. slect menu
7. it will give you all the chioces you need to title, finailize, protect and all needed to view the dvd
Ok, Guest @ solution #1 and #3 solved this for me.
Step 1. remove battery pack.
Step 2. Plug in to outlet.
Step 3. Insert desired disc.
Step 4. Toggle down on the "mode" lever for "Play-back" mode.
Step 5. Press "function"
Step 6. Scroll to and select "menu"
Step 7. Scroll to and select "disc options"
Step 8. Scroll to and select "Finalize"
Step 9. Scroll to and select "Yes"
Follow prompts from there.
This worked for me.