All the lights and everything is on but when you push start it just beeps and does nothing.. whats wrong?

I would find the electrical breaker for this unit and shut it off for a minute, then re set the breaker thus resetting your unit.

You will need to replace the door lock assembly. Here is the part to order.

Most laptops use beep codes to isolate startup problems . You may hear something like beep beep-beep or a combination
The beeps tell you why it's not starting ... if you hear the sounds then the manufacturers web site will tell you what the code you are getting means

Alright, pretty unconventional, but simple and Genius on my part!!! Not sure if we're talking about the same models, but I was cruising this site with the same problem.... K, so it's making three beeps right? Check inside the DRYER (maybe same issue w/ washer, I dunno), but there's a button on the top-inside.... DEPRESS THAT BUTTON, and while holding it down, START THE DRYER (HOLD TO START), if it starts working, this tip is for you!

1) on the opposite side, where the door depresses that same button on the dryer door... you ready for this... see step two ;)

2) SUPER GLUE A PENNY IN THAT INDENTATION PART, your problem is there's not enough connection, and the door is no longer holding that same button down...

3) TA DAH!! Since a repair guy could've charged ya like 50+ bucks, I'll take... emmm.. 25$, email me at [email protected] on where to send the check, or just shoot me an email to say thanks ;)

if your computer beeps when it boots it is telling you something follow the link below to find out what is wrong with your pc.

http://www.computerhope.com/beep.htm

What was wrong with your dryer? I am having that same problem?

when u push the buttons do all lights light up if so ,, machine is in lock mode ,, press and hold the little icon that read lock for about 3 seconds unitll lights are off then run ,, let see

the problem might be the start switch itself. if the switch is going bad it could have either a carbon buildup on the contacs preventing it from starting (unlikely) or the contacs are wearing out and it is more hit or miss if it will start. as time goes on the problem will get wose

If your WW3 has batteries it must have spell check or printer options there is a small door on the top right of the machine.

open the door and unplug the plug you find there and try it.