Problem with drivers door power window. 1992 lexus es 300 motors runs when button is pushed, window does nothing how do i get the window back on its track?

I can help you with the drivers door. Simply put a screwdriver in the hole between outer door edge and lock mechanism. Push mechanism towards inside of door. The reverse of what happened when you accidentally locked the mechanism. I have done the same thing

There is nothing you can do to fix this at home, you need the dealer to scan the systems module and see what is going on.

Does a Lexus ES 300 camshaft position sensor WHAT???

If you are asking if a 1992 Lexus ES 300 is equipped with a camshaft position sensor, the answer to your question is NO. Otherwise, you need to clarify exactly what you are asking.

I would say a couple hours labor, $150-180

hi ,have a look here Lexus Workshop Manuals
please rate me if useful.thanks

remove the door panel . hook the switch back up & test for power at the motor.

This sounds like a window motor that has burnt out. When replacing the motor it's also a good idea to replace the window regulator also contained inside the door.

IT CAN BE BROKEN WINDOW MOTOR YOU NEED TO REMOVE THE PANEL TO SEE IF YOU GOT POWER OR GROUND GOING TO THE MOTOR BUT BEFORE THAT I WOULD CHECK IF THERE NO BROKEN WIRE IN THE DOOR WHEN YOU OPEN THE THE DOOR WIRE MOVE AND AFTER TIME DOES WIRE CRACK AND BREAK THANKS PIERRE

will need both motors and regulators if you are getting power to the window motors.

my es 300 lexus 1993. doors not lock trunk not open & its not strart