An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has achieved Level 3.
Re: I'm stuck in service mode model 3913ctc
Refer to the service manual for help. if that do not help. this is the procedure.
some one had entered a code in the tv for parental lock causing the tv .take it to a tech to lift up the "eeprom" from out of the set and resolder it back,that will reset the tv.ask your family if any one of them had entered the code in the tv.if none of them remember then you will have to call the tech.good luck
feel free 4 further assistance .rate the particular experts solution as fixya that helps u understand n solve ur problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do a hard reset, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done
If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Search the site by type in the "brand name" to your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important.
You have a common problem with the center infared LED or one of the photo transistors on either side... My guess is that when the tape got previously stuck you may have inadvertently broken the prisim in the center of the tape housing assembly trying to get the tape out. If that's the case you'll need to repair or replace it or the LED itself..
Presently the VCR is booting and finds the infared signal missing and goes into shutdown. No amount or resetting will prevent that..
If you take it to a shop it's less than a one hour job. But if you're any good with taking these apart and VERY observant you could do this yourself.
Hope this helps.
PS: If you have to replace the LED remember they are polarized ( positive and a negative) just make sure you put the new one in the same way.