Question about Phones

1 Answer

Philips cordless phone CD245 Handsets will not find base station - they keep searching all the time.

Posted by on

  • 3 more comments 
  • Anonymous Jul 12, 2008

    my Philips Cordless phone answer machine CD2452B
    CD2452B/05
    keeps flashing the word searching and it will not work

  • Anonymous Aug 14, 2008

    Similar problem (Philips CD245 base station and handsets)

    Base station died after about a month.

    All phones displayed "searching".

    Took it back to Argos and got a replacement base station.

    Now i've got the same problem with the replacement base station after about a couple of months.

  • Anonymous Aug 21, 2008

    Same thing here. They did work fine for 5 months before this happened.

  • Khuram R Aug 31, 2008

    I have exactly the same problem

  • Anonymous Apr 14, 2009

    same problem here (CD2451S/05) base unit has stopped working, hand set still charges on base unit but constantly displays 'searching'.

    :(


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Simil problem. Also then clocking in DSP not oscilation. then facking mather of Philips

Posted on Jul 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PHILIPS CORDLESS CD245 TRIO AND other 2 handsets power requirements (Adapters lost)


It should say on the bottom of the base unit. I would expect 5-6 volt 500ma. That would be the size that would charge those batteries.

Oct 16, 2016 | Philips Phones

1 Answer

Can I use Philips CD240 CD245 handset on a philips dc445 base


Simple answer yes they are compatable I just did it as I could not find any CD445 handsets.The manuals are downloadable from Phillips just search for CD445 or CD245 manual.Just press speaker button on 445 base for 5 seconds untill it beeps twice,then on new 245 handset menu/ register enter default code 0000 and bingo its live. Oddly the newer handset bases are 9v and not compatable with 445 bases which are 6v and have different contacts so you cant sit your 245 in the old base.My new 245 came with a new base anyway so no problem.

Apr 06, 2012 | Philips Phones

1 Answer

Our phones keep saying searching, but nothing happens. We tried deregistering the phones and registering again, but it doesn't work. We tried unplugging everything and plugging it in again, but still...


It's likely that the transmitter located in the base station has failed. Your handsets are looking for an answer from that station and not receiving any.
If not still under warranty, it may cost less to replace the whole system than repair the base station even though most of the electronics that makes the system 'cordless' is mostly dependent on a packaged RF module that costs only a few dollars wholesale.

Dec 01, 2010 | Uniden DECT15803 Trio Cordless Phone

1 Answer

My house phone keeps saying bs search and wont call out or recive calls


bs meaning of course - Base Station...

There is no link between your cordless set and the base station, hence the message.

I would do what SpencerR stated, try to re-establish the connection via the base station to accept the handsets again.

Have the cordless sets worked before?
It may just have a hick up, I would un-plug the base station and leave it un-plugged... now get all the cordless sets, and take out the batteries in the cordless set. Wait for about 15 seconds for all the power to drain out of the sets, and re-install the batteries.

Once all the cordless sets are back up and working, plug in the base station and wait for about 1 minute.
This forces the base station to re-establish and link to the cordless sets.

Good luck

May 11, 2009 | Phones

2 Answers

Base station and units all say 'searching'


You may need to register your handset to the base.
Normally ,there is a advanced setting ,register handset. At the same time, press and hold "page" key on your base 4 to 5 second , there is be a registation success tone from handset. You can register all of your handset ,one by one. Some model need to input register code, normally ,it is 1234 , or 0000.

Dec 22, 2008 | Philips DECT 2252S Cordless Phone

2 Answers

Philips CD245 Cordless Twin


just one phone displaying unregistered

Sep 28, 2008 | Philips DECT 2252S Cordless Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

911 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96333 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4751 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...