Question about Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

2 Answers

Car dies when u put it in gear but u can drive it but when u go to stop it will die it is a 1992 chevy camaro rs 350 throttle body with brake booster vacum un done it will sit and idle with it on it will idle for about 3 mins. but with it off it will still die when u put it in gear what do i need to do john henry sparta tnn. 38583 (931)808-3624 cell phone i have tried everything i know to do ????????

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 281 Answers

Go to autozone and buy you 2 bottles of heat and put it in the gas tank.it sounds like you have built up some condensation in you tank an its pumpimg the water thats accumulated in you gas tank.put the 2 bottles in the gas and it will dry up the water.it won't take long

Posted on Apr 10, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

Hi, sorry but you posted this in the wrong repair section, this is for vacuum cleaners. Please repost it in the auto. section.

Posted on Jun 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keeping the motor running?


Stop using that seafoam, it's not helping.

I think you're ready to get the carburetor rebuilt again. Next time you store it, fully drain the carburetor before you put it away - the fuel left in the carburetor builds up varnish as it evaporates, and that varnish clogs your jets.

Aug 04, 2014 | Clymer Evinrude/Johnson 48-235 HP...

1 Answer

Roomba 530 is clicking when running then stops


The battery is not charging and has died a noble death. Buy a new battery.

Nov 28, 2013 | iRobot Roomba 530 Robotic Vacuum

1 Answer

Issues with SSBC electric vacuum pump 28146


Check the internal vacuum pipes of the electric vacuum pump. For more information, please visit computer tuition.

Nov 04, 2012 | Stainless Steel Brakes SSBC 28146 Electric...

1 Answer

I have a George vacuum and it's died. I have


Of course, you should double check the plug-in recepticle - just to be sure you have not thrown a house breaker. The easiest way is to simply plug something else into the same recepticle. If you simply move the vac plug, you may choose another recepticle oparating on the same breaker.

How did you check the fuse? Fuses can fool you. As a general repair tech, I learned long ago not to rely on my eyes. I have a multimeter and do an ohm check - because sometimes a fuse can look ok, but actually be burned in-two where its not easy to see.

All that ruled out, the most common thing that stops functioning when a vac dies is the switch.
Don
That ruled out, when vacs die it usually the switch.

Apr 06, 2012 | Vacuums

1 Answer

L purchased a roomba from canadian tire in canadargvidcab3 black last december what is the warranty it keeps dying after 15 mins


Poor or faulty battery. Also, make sure that the gear box is free from debris. If the gear box is clogged, your Roomba will drain its battery.

Aug 30, 2010 | iRobot Roomba 4210 Bagless Robotic Vacuum

1 Answer

I have a iRobot 4150 and have recently experiencing performance issues with the vacuum. Recently, it started stopping about a minute after you turn it on. I thought maybe the battery was the issue, but I...


Yes, a common issue with the cleaning head module, chm. You will need to diassemble the Roomba and remove all debris from the CHM. Also take a look in its gear box.

May 02, 2010 | iRobot 4150 Roomba Vacuum

1 Answer

My Shark just stopped cold in the middle of steaming the floor...got one good pass of the floor, and after water refill, bam. Stops..no steam, no "on" indicator light on body. No other problem except it...


It sounds like the heater core has popped a fuse. This model has a built in fuse to the heater and is hard wired in there. Unfortunately there is no way to fix this. This machine is made to basically throw a way in a couple of years.

Dec 03, 2009 | Euro-Pro Shark Steam Mop - Gray/ Purple...

1 Answer

Hoover power drive vacuum cleaner simply shut off and died


my hoover vacuum is very hard to push forward but easier coming back.Any help will do.

Jan 24, 2009 | Hoover U6311-930 Power Drive Bagged...

3 Answers

No pwer


Our Hoover U5780-900 stopped working while using the attachment. We let it cool down for about 5 minutes and it fired back up. It appears to shut down when it overheats.

Nov 14, 2008 | Hoover U5780-900 Windtunnel Cyclonic...

Not finding what you are looking for?
Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum Logo

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Roger Potts

Level 3 Expert

694 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Kenmore Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...