Question about Philips VOIP8411B/37 IP Phone

1 Answer

Unregistered, registering a new base, faillure....

After used for almost one year, I did something wrong, then always displays " unregistered ", pushing the button of " reg. ", "Registering a new base Please wait ", then " registeration failed " ... no way to do anything... please help me, thanks

Posted by on

  • 2 more comments 
  • Zanty Jul 27, 2008

    I have the same problem. I already reset my base unit and my router but I still cannot register.

  • jordaar Dec 29, 2008

    Even I have same problem.... Drop the handset and replaced batteries and now it cannot register to base station... Anyone was able to solve this ?

    Thanks.
    Jor.


  • Anonymous Jan 16, 2009

    Was working fine for over a year. Removed batteries for a couple weeks, after reinstalling batteries, now won't re-register with base.

  • Anonymous May 25, 2009

    Bigbeatpro, thank you so much for you help. I did what you said and my phone works.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

IF YOUR HANDSET WAS WORKING AND THEN STOPPED WITH "UNREGISTERED":
If lowercase unregistered is in main display and a reg. appears under the left soft key:
Press the left soft key below REG. and then press and HOLD the button on the top of the base station until the two indicator lights on top of the base station turn off. Wait until handset signals with beeps and registered. You are done

THIS IS FOR FRESH OUT OF THE BOX REGISTRATION OF UNREGISTERED HANDSET
Press REG Register shall be highlighted.
Scroll to Register. Press Select.
Enter the system PIN (Default: 0000). Use
CLEAR to correct typing errors.
Press ENTER to confirm.
• Your handset starts searching for the base.
Press and HOLD the round button on top of the base unit until the two
indications turn off.
• If registration is successful, the signal icon

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Philips cordless phone se 455


CANON IR2520 ERROR E000000

Nov 11, 2013 | Lands Phones

2 Answers

I have Uniden DECT1480-3. I purchased two expandable handsets, but I cannot figure out how to get the new handsets to register with the base unit.


Up to 6 handsets can be registered with the DECT 1480 phones. I have the 5 phone unit and needed to add the 6th phone. All I got was "Searching" in the display and the battery wouldn't even charge!

So here's what you have to do to get additional phones (up to 6 units) to work with the base. If you can get past step 1, it's a snap...

Step 1: Place a charged battery in the handset. This could be a problem if all your handsets are not registered, since unregistered phones don't charge (who thought of that design?). What I did was SWAP the battery from an already registered and charged phone with the new unregistered phone.

Step 2: Here's where the magic happens. Press the 'END' and '#' keys simultaneously... hold them down until a System Reset menu appears. Select "Deregister HS" and press Menu.

Step 3: Now, do the same thing again (hold down END and #), but this time select Base Unavailable and press Menu. You will see Base Unavailable Yes/No... Select Yes. Then place the handset in the base, wait a few seconds, and Voila!. it's registered. You can even change handset numbers using this menu if you play around with it.

Thank you, helpful employee at Costco for supplying the magic code. And hey there, UNIDEN... including this in the operation manual would have saved many customers much grief with de-registered phones!

Enjoy!

May 14, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

The handsets are displaying 'UNREGISTERED' and not working!


UNREGISTERED means the phone has not yet been set up to work with any particular base. I don't have any Phillips phones, so I can't tell you the procedure, but it should be outlined in the owners manual. Look for registering your handsets.

Jul 31, 2009 | Philips Lands Phones

1 Answer

Can't re-register extra receiver


Try this, Push and hold the "End" key, while still pushing the "End" key push in the "#" key and hold both keys till you hear a beep. The LCD display should now say "De-register Handset" and under that "Base Unavailable" Select Base unavailable. The LCD should now say "Handset not registered, place in base" Just set it in the charging cradle on the base unit and it should register to the base.

Feb 25, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

Wharfedale digital orb twin phone


TO REGISTER A HANDSET

[At the base]

1. Press and hold the the PAGE button on the base station for at least 3 seconds. You have 90 seconds in which to register a handset.

[At the handset]

2. Press MENU and scroll to ADVANCED SET and press MENU
3. Scroll to REGISTRATION and press MENU
4. If necessary scroll to display REGIST.BASE and press MENU
5. BASE 1 2 3 4 is displayed and the registered base number is flashing.
6. Enter the number of the base you wish to register to your handset. If you have only 1 base station, press 1. If you have 2 base stations, press 1 or 2, etc.
7. When the display shows PIN---- , enter the base pin.
8. When the handset is registered to the base it is assigned a handset number.

If you have forgotten your PIN you will need to:

Reset your ORB

1. Press MENU, scroll to ADVANCED SET and press MENU
2. Scroll to RESET UNIT and press MENU
3.CONFIRM? is displayed. Press MENU
[NOTE: Entries stored in the phonebook and new answering messages are retained. You PIN will return to the Default setting 0000]

To Set the PIN

1. Press MENU and scroll to ADVANCED SET and press MENU
2. Scroll to PIN and press MENU
3. Enter the current 4 digit master PIN and press MENU. [Default setting is 0000]
4. Enter the new PIN and press MENU

Hope this has been helpful!

Rob

Dec 28, 2008 | Uniden Cordless Phone

1 Answer

How do you unregister a defective handset so that it can replaced


1. Delete or listen to all voice mail messages, if necessary, to clear the IN USE/Voice Mail light indicator.
Note: Skip this step if it does not apply to your MD Series cordless telephone model.
2. Press OFF on the base station and each handset.
3. Press and hold down PAGE on the base station until the IN USE light flashes slowly, then release.
4. Press and hold down PAGE again until the IN USE light begins to flash quickly, then release PAGE.
5. Quickly and fully press and release PAGE again.
6. Please register handset displays. Press OK to begin the registration process, or press EXIT.

Dec 10, 2008 | Motorola Mobility MD41 Expandable Handset...

1 Answer

Registering a new phone


how do i register my new samsung rant phone ?

Oct 04, 2008 | Uniden DCT648-3 Cordless Phone

1 Answer

Phillips dect2152


If you bought the base and handset together they should already be registered. If not then the instruction manual is downloadable here: MANUAL


The relevant section is on page 16 - here is a copy:

4 handsets can be registered to the base station. A handset
can only be associated with 1 base station.
�� To register another handset
First enter registration mode by unplugging and
plugging back in the power adapter to the
electricity supply.
Handsets registering / unregistering ( )
�� To unregister the handset you use
enter the RC code*
�� To unregister all the handsets (except the handset you are using)
enter the RC code*
Once the menu is selected, enter the RC* code written under the base and press
to confirm.
Warning : If you wish to associate a non-Philips handset to the DECT 211 or DECT 215 base
stations, make sure that these handsets are GAP compliant otherwise they will not operate properly.
*RC code
(Registration
Code) is
written under
the base.
Warning : Once unregistered, the handset is no longer operational.

Please rate my assistance this should be a fixya!

Mar 29, 2008 | Philips DECT 2151 Cordless Phone

2 Answers

How to REregister handsets


You can unregister your phone without being in the cradle, but to re-register them, just put them back in the cradle.  After being unregistered, they will automatically re-register once they are put back in the cradle of the main base.  Try setting them back in the base cradle to re-register, and hopefully that will work for you.

Dec 01, 2007 | Uniden TRU9480 Cordless Telephone

7 Answers

Uniden handset TCX905 with base unit TRU8866-if compatible?


I just successfully registered 4 TCX905s with my TRU8865 base - it's documented in the TCX905 manual.

Be sure the handset you want to register is fully charged.

Remove the handset you want to register from its charger.

Now unplug the AC for the main base, hold down the 'find handset' key on the base and plug the AC in again, when it beeps, you can let go of that button.

Hold down the '#' on the handset you want to register, it will show 'Registering Handset...' and when it beeps, it's done - registered, you're good to go :)

Oct 11, 2007 | Uniden TCX905 Cordless Expansion Handset

Not finding what you are looking for?
Philips VOIP8411B/37 IP Phone Logo

1,255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Computers & Internet Experts

The Knight
The Knight

Level 3 Expert

70983 Answers

micky dee

Level 3 Expert

2642 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Philips Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...