Question about Packard Bell PC Desktops

1 Answer

When i try and load creator9 i get a message that the certificate is missing

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 624 Answers

This is a precaution that Microsoft uses to help prevent any software get loaded that could possibly harm the system or not operate properly.

If you trust the software maker, go ahead and click "continue anyway" and load the software.
I am guessing that the "creator 9" software you are loading is the Roxio Easy Media Creator 9. If so, you should not have any problems just from loading it.

I have the same software and received that same window when I loaded it, but since then I have upgraded to Creator 10 not long after that and it is much better.

As time passes and you load more and more software, you will probably see that message a few times when loading software.

it does not mean that the software is bad, just that it has not been tested by microsoft and given a certificate as being compatible with the operating system.

Just don't load any software that has come from questionable places, and it would be a good idea to scan anything you plan to use with your anti-virus software first to make sure it is clean.

If you found this information helpful, a good rating is always appreciated :)

Posted on Jun 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I get a message that you have security certificate error, navigation blocked....and it says that your security certificate has expired or invaid. So plz help me in solving this problem i want to connect...


Please tell us your operating system (Windows 7, Windows 8, Mac OS X 10.8, 10.9 etc.)

In general, certificates will fail if your computers clock/date/time is incorrect. Check your settings and try again if necessary.

Jan 08, 2014 | PC Desktops

1 Answer

Us.data.toolbar.yahoo.com:443 invalid security cirtificate iwant valid security cirtificate


Unless you set your browser up for high security, this certificate is bogus. Rarely does a security certificate notice appear on yahoo without having set your browser up for high security.
Lower your security if it set to high and see if the message disappears. If your browser security is set to normal, then this is a bogus certificate for a bogus yahoo site.

Aug 30, 2010 | PC Desktops

1 Answer

Certificate error on web site.


This is basically an Internet Explorer 7 Website’s Security Certificate problem! You have to self-sign the certificate on the client computer or add the URL manually to the trusted security zone. When you are trying to access a secure web page, you receive the warning message:

"There is a problem with this website's security certificate. The security certificate presented by this website was not issued by a trusted certificate authority."

Or

"Security certificate problems may indicate an attempt to fool you or intercept data you send to the server."

To fix this issue, you can follow either of the methods:

meth1.jpg
meth2.jpg
ie%281%29.jpg

Method 1:

You have to install the Microsoft Windows Small Business Server 2003 (Windows SBS) self-signed certificate on the client computer. To do this, follow these steps:

  • In Windows Internet Explorer 7, click Continue to this website (not recommended).
A red Address Bar and a certificate warning appear.
  • Click Certificate Error button to open the information window.
  • Click View Certificates > click Install Certificate.
  • Click Yes, to install the certificate, when warning message appear.

Note: For Windows Vista users, right click on Internet Explorer icon. Select Run as Administrator.


Back to top


Method 2:

Add the URL to the Trusted Sites security zone:

  • Open Internet Explorer
  • Go to Menu bar > Tools > Internet Options.

    tool.jpg
  • Click Security > Trusted sites > Sites

    sec.jpg
  • Type the URL in the Add this website to the zone text box > uncheck Require server verification >Add > click OK

    trust.jpg
  • Click OK to exit.

    cus.jpg

Now you have added the URL successfully into the Trusted Sites security zone.

Jul 16, 2010 | Dell PC Desktops

1 Answer

While accessing mail i am getting message (error code:ssl_error_rx_record_too_long_


Error code: ssl_error_rx_record_too_long Your SSL website may fail to load and display the error

Error code: ssl_error_rx_record_too_long

This usually means the implementation of SSL on your server is not correct. The error is usually caused by a server side problem which the server administrator will need to investigate.

Below are some things we recommend trying.

- Ensure that port 443 is open and enabled on your server. This is the standard port for https communications.

- If SSL is using a non-standard port then FireFox 3 can sometimes give this error. Ensure SSL is running on port 443.

- If using Apache2 check that you are using port 443 for SSL. This can be done by setting the ports.conf file as follows

— clip —
Listen 80
Listen 443 https
— clip —

- Make sure you do not have more than one SSL certificate sharing the same IP. Please ensure that all SSL certificates utilise their own dedicated IP.

- If using Apache2 check your vhost config. Some users have reported changing <VirtualHost> to _default_ resolved the error.

Mar 18, 2010 | MPC Computers ClientPro 125D PC Desktop

2 Answers

Whenever I open yahoo, the home page opens but if i try moving to the next page it brings a message certificate error"navigation blocked".The same problem happens in facebook but all other websites are...


when u see that error clik on it and view certifacate then u can install from there its very easy then close interent explorer and open again then it not need certificates.

Jun 04, 2009 | PC Desktops

1 Answer

Certificate errors


This is simply letting you know that comcast.net has not updated or chosen to participate in a certificate program that microsoft uses.  It is nothing to worry about with your email site.  If you go to unknown websites I recommend that you do not continue if you get this warning.  Only way to get rid of it is to reduce your protection on the internet which I would not recommend.

Jan 07, 2009 | Dell Dimension 2400 PC Desktop

2 Answers

Certificate error I cannot get into any email accounts


Hi,
Please perform the following steps.
This error message appears because the security certificate was issued by the University itself and not by an authority acknowledged by Microsoft.
To solve this problem, for most webpages you just have to install the "CA Certificate" of Ghent University in your browser.
For certain websites, such as https://zephyr.ugent.be, you need to import its own certificate:
Click on "Certificate Error" next to the IE7 address bar and then "View certificates"
Click on "Install certificate..."
Click "Next"
You will be asked where the certificate has to be stored. You can use the default setting and click "Next".
Click "Finish"
Confirm by clicking "Yes"
On your next visit, you will not see the error message again. Hopefully it should work.. Thank you

Sep 13, 2008 | PC Desktops

1 Answer

When I click on my mail icon, I get this message: the security certificate presented by the website has expired or not yet valid.


Yes if it's a web based email server then you will have to "accept this certificate" to access your email from within your Browser.

Jul 15, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Packard Bell PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you a Packard Bell PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...