Need to know how to set clock in 06 chevy malibu

google 2006 chevy malibu radio fuse location

https://www.autogenius.info/chevrolet-malibu-2006-fuse-box-diagram/
https://fuse-box.info/chevrolet/chevrolet-malibu-2004-2007-fuses-and-relay

06--3.5L-
1st step 44 ft lbs
2nd step--turn additional 140 degrees.
If you want torque sequence, let me know.
vin 8--k--L give the same torque specs. My info didn't say Malibu, it said, 06-- chevy--3.5L--v6. I already listed the vin.

The channels r blown, u need a new radio

New radio

If the radio has a set button: Turn key on and radio off. Press the set button and use the right seek button to set the minute and left seek to set the hours. If it has no set button: find the hour and minutes buttons or holes under the auto tone knob. Turn key on engine off and radio off. press the left button for the hour and right button for minute.

you will have to take it to the dealer, give them the vin number of your car. once that is set, it is to stop thieves from trying to pawn them. sorry no easy answer on this one, unless you know someone who works at gmc/chev but they will still need all the infor

security will no be affected but if you don what to do things like re-set the clock or the car has a stereo with a code and you dont have the code anymore its better if you use a sigarret plug with a 9 volt battery they're sold at any automovile store specifically to maintain settings. hope this helps
you.

Setting the clock on a 2002 Chevy Malibu

1. First, locate the H and M buttons located just below the tuner knob (the lower of the two).
2. You press AND hold either one of those buttons for a few seconds until it beeps, or the numbers are flashing.
3. You can then use the H button to set the HOUR and M button to set the MINUTES.
4. To finalize your time selection, just wait 10 seconds or so and the flashing should cease and your clock is SET!
5. If it does not set after waiting, just press the POWER button to activate the radio and it will finalize the clock settings.

The power steering is electric on that car. It has a electric motor on the column, and a control module. There are several causes that could be the problem. You need to have it scanned to get a better idea of what to do. If you can give me the codes you get then I will be glad to advise you on what's best. Good Luck

My Name is Courtney and I had my car a week and the power steering went out, I don’t have the money to fix it, I need your help with getting this problem straight with Chevy. I’m tying to get a RECALL so people can get their money back, or get the car fixed for free. Please call Chevy customer hotline at 866-790-5700, ext 42864, this is who I talked to. And email me at [email protected], this is not right, we need to do something about it. Or call customer assistance, 18002221020, the dealership told me, i turned to much or it got hot, doesnt that sound a lil fishy