Lexmark X4580 (all in one wireless)
You can try out these two options one by one to fix it up:
1 Unplug the printer.
2. Uninstall the drivers.
3. Reboot the machine.
4. Go to the lexmark site and download the drivers.
5. Install the new drivers.
B)You will get the "CANNOT RETRIEVE APPLICATION LIST" if your pc blocks
the communication from the printer. This can be configured in your
personal firewall. This can be Windows Firewall (found in Control
Panel, Security Center), Symantec Client Firewall or similar. Depending
on the configuration of this firewall you might or might not get pop-up
messages from the firewall during installation. These pop-ups will
allow you to permanently allow for this incoming communication. But
your firewall might be set not to let you decide anything which will
typically mean that the calls will be blocked out. This will often be
the case if you have a company laptop configured by the company IT
dept. You might then have to ask an admin to add exceptions the
applications used by Lexmark as the configuration might not be open for
you to change.
I think this is the complete list of applications:
Job Status Window Interface: C:\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\lxdijswx.exe
Lexmark Communications System: C:\WINDOWS\SYSTEM32\lxdicoms.exe
Lexmark Connect Time Executable: C:\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\lxditime.exe
Lexmark Device Monitor: C:\Program Files\Lexmark 3500-4500 Series\lxdiamon.exe
Lexmark Imaging Studio: C:\Program Files\Lexmark 3500-4500 Series\App4R.exe
Printer Communication System: C:\WINDOWS\SYSTEM32\lxdicfg.exe
Printer Status Window Interface: C:\WINDOWS\SYSTEM32\SPOOL\DRIVERS\W32X86\3\lxdipswx.exe
Please don't forget to rate the solution.
Apr 17, 2008 |
Canon MultiPASS F50 All-In-One InkJet...