Where can I get set up instructions for Linksys etherfast Cable/DSL router with 4 port switch

To fix this problem all you have to do is access your router and leave the username blank and type admin for the password. To access your router put this http://192.168.1.1 into your browser address bar.

Here it is.. (click here), once you click the link, your browser will open the manual for your Router.

If you you need further help, let me know.

Good luck.

Thanks for using FixYa.

you should be able to download from Linksys website

put the internet cable and ethernet cable in lan port then try to ping the google or yahoo or something else like that start-->run--->ping google.com -t

Check you wall plug power supply, they get bad not long after they are put to service. Find a replacement power supply with preferably higher current rating and your problem goes away.

Go to this link:
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1166859678292&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=7829269263B03
Start with EasyLink Connect. Keep going to the NetCheck.

Click the link:
http://www.linksys.com/servlet/Satellite?c=L_CASupport_C1&childpagename=US%2FLayout&cid=1166859678292&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=7829269263B03
Start at the top & work your way to NetCheck.

I HAVE ONE OF THIS ETHERFAST CABLE/DSL ROUTER BUT I CAN INSTALL...CAN YOU HELP ME????? PLEASE

modem to inter net or wan port on this router>and u have 4 ether net od lan use any one -->ether net cable to pc's>and if u r using cable inter net then reboot the both router and modem u can get inter net access if its dsl contact linksys cause need to configure teh router rate me solved if its help full thx

the cable modem lead should plug into the internet socket, then a lead rj45 should come from any of the other 4 ports to your lan network card in the back of your pc and thats it, all the settings will be the same as before.