Question about Denon AVR-2400 Receiver

1 Answer

Need Users Manual

Can't seem to find a users manual anywhere online for this model.

The receiver is stuck in standby. I need to reset it but am unsure how.

Posted by on

  • 1 more comment 
  • COgal Jun 24, 2008

    Tried it. The first time pushing the power button, the standby light will blink. After that, no response.

  • COgal Jun 24, 2008

    Is there a way to remove the standby option? To only be able to shut it off by the physical switch?

  • COgal Jun 24, 2008

    Denon tech support wrote me back saying protect mode is turning on.

    Response (Ean Levy) - 06/23/2008 02:09 PM
    Your receiver is going into protect mode. It goes into this mode when something is happening that can potentially cause damage to the receiver. This can be caused by a number of things, however, there’s no way to tell what actually caused it.

    You will want to make sure that you have proper ventilation space above the receiver (a minimum of four inches), and that you have no other devices sitting on top of the receiver.

    You also want to make sure you have no speaker wires touching either other speaker wire or any place on the Chassis of the receiver other than the posts they are attached to.

    Also, make sure that you are not running your receiver’s volume above zero for any extended period of time.

    If you have verified these are not an issue another thing you can try is to disconnect all of your speakers and turn the receiver on. If the problem continues you will need to have the unit replaced by your retailer (if purchased within thirty days) or repaired you can find your closest service center at

    If this does resolve the issue, begin connecting your speakers one set at a time until you are able to determine which speaker is causing the issue. At that point replace the speaker and speaker wire that is causing the issue"

    I have no speakers, inputs, anything attached.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 1,512 Answers

Hi COgal

I too have not been able to come up with one. Not a common model maybe, or 10 years old is just too old for electronic versions of the manual to be about.

Try This
Disconnect the amp from the wall socket for 20 mins,then plug it in and try again. Let me know what happens.


Posted on Jun 22, 2008

  • Graeme Ross
    Graeme Ross Jun 24, 2008

    upgrade your rating of me man,and I will help you :)


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

In need of a users manual

You have to add the Make and model number of your product then only you will get a manual.

Jun 09, 2012 | Audio Players & Recorders

1 Answer

Turns to standby when turned on

Look user manual (last pages) and try to reset macroprocessor. If does not help you need to bring it to repair place to diagnosing.

Dec 08, 2011 | Denon Audio Players & Recorders

1 Answer

Need to get a copy of the users manual for the RCA 65 ipod iphone clock radio

First of all, here is the main ONLINE SUPPORT page for your model:

And here is a direct link to the ONLINE USER'S MANUAL for that model:

To view the Support Page or the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated and the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, then follow the onscreen instructions to install the software on your computer.

I hope that was helpful to you, good luck and take care.


Sep 13, 2011 | RCA Audio Players & Recorders

1 Answer

Hi thank you for youe email But wwhat I needed

1. 2. i could not locate an online manual for that on
just post another problem with the specific problem you are having with the second device.
Thank you have a nice day

Jun 30, 2011 | Audio Players & Recorders

1 Answer

Can I get an instruction manual online?

Yes, you can get instruction manual online, go to and put model number and brand name of product that you need user manual copy and hit Enter, you will get long list of sites as result, select proper site that has user manual to get it download.
OR mention model and brand info of product here to find out for you.

Apr 19, 2011 | Audio Players & Recorders

1 Answer

I have a Integra receiver model number DTR 66 and I have no sound. it appears to have everything connected and should be working. I would like to know how to reset the receiver or what steps do I need to...

NO sound at all? That would be odd as its internal FM receiver is independent of any user connections. I'd work on getting FM to work first, then move on to more complex issues.

The manual is here:

To reset the AV receiver to its factory defaults, turn it on and, while holding down the [Video 1] button, press the [Standby/On] button. "Clear" will appear on the display and the AV receiver will enter Standby mode.

Dec 26, 2010 | Audio Players & Recorders

1 Answer

User manual for GE clock radio model 7-4606BKA

Don't have a manual, but do have the radio, know how to use it w/out manual. Any questions, email me.

Jun 24, 2008 | Yamaha HTR-5650 Receiver

4 Answers

Users manual

go to the manufacturers website they generally have downloadable manuals-free

Jan 17, 2008 | Audio Players & Recorders

1 Answer

Onkyo TX-8522 stuck on standby

This is Not a real Fix, However it stops the problem!
Do not plug any power cords into the Receiver.  I have found that using the "switched or unswitched" plugs in the back cause the trouble. 

Nov 15, 2007 | Onkyo TX-8522 Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

386 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts


Level 3 Expert

4678 Answers

Dennis McCollum

Level 2 Expert

137 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6364 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides