Question about Printers & Copiers

Open Question

Reset Ink counter in Dell 946

How do I reset the ink counter in this printer?

Thanks for you help

Posted by on

  • lyeerluna Dec 02, 2008

    I have the same problem. I put in recycled cartridges and ink counter still reads empty.

  • levyracing Dec 26, 2008

    I HAVE REPLACED NEW INK CARTRIDGES AND WHEN I PRINT IT TELLS ME THE INK IS LOW. HOW DO I RESET INK COUNTER?

×

6 Suggested Answers

  • 49 Answers

SOURCE: Ink Absorber Replacement for Canon i70 Printer

Not easy for most people to replace or clean ink pads, but this will reset
1) Close the print head cover, and turn off the printer. While pressing the Resume/Cancel button, press the Power button.

(Do not release the buttons. The LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button.

(Do not release the Power button.)

3) While holding the Power button, press the Resume/Cancel button 3 times, and then release the Power and Resume/Cancel buttons.

(Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

During initialization, the LED blinks in green.

4) When the LED stops blinking and lights in green, press the Resume/Cancel button 4 times (Each time the Resume/Cancel button is pressed, the LED lights alternately in either orange or green, starting with orange.)

After the function (menu) is selected, press the Power button. The LED lights in green, and the selected function is performed. (When the operation completes, the printer returns to the menu selection mode automatically.)

Posted on Jul 06, 2008

Mrvica
  • 167 Answers

SOURCE: Reset Waste Ink Canon MX318

Because It is full. And replace or you can clean it. Either way you must any of this two things.
Good luck.

Posted on Sep 16, 2008

  • 1 Answer

SOURCE: Canon MP210 Ink Counter Reset

You can find the solution here:
http://www.nifty-stuff.com/forum/viewtopic.php?pid=20613

You must hold the stop/resume button for 2 or 3 seconds. The printers detects that it's a filled cartridge and alert you about it... That's all.

Posted on Nov 15, 2008

  • 1 Answer

SOURCE: reset ink counter canon mp240

Hi,
I'm not sure if this is exactly what you are looking for but I came across this website and I think it may be helpful. https://www.oddparts.com/ink/cbc30_31.htm Hope it is.

Posted on May 12, 2009

websnail
  • 419 Answers

SOURCE: reset ink-pad counter on epson stylus photo 1400

Hi,

The simplest way to do this is to grab a copy of the A10_IPR utility that Epson distribute to their customers...

The utility is available to North American customers if you register no this site page http://www.epson.com/ipr/

The utility is also know to be available in the wild if you search for "waste ink ipr".

Just remember to scan any download using a virus and malware scanner before you attempt to use it as some utilities contain trojans or similar nasties.

Hope that helps.

Posted on May 12, 2009

ccoddio
  • 1 Answer

SOURCE: reset ink counter canon mp240

Press the red button in the right bottom, the one in witch is a red triangle. Press it for 15 seconds. Ciao!

Posted on Nov 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I print from the internet my copy prints my color comes out a different color I think it might be my black ink is off I have a dell 946 all-in-one printer.


Are you using Dell Series 5 ink cartridges?

Can you copy a document under the glass? Black & White and color? Do they look ok?

If you unplug the printer from the wall and remove the power brick for 60 seconds, this will reset any error messages the printer has. I would then plug everything back in.

Power on the printer.

Open the printer(with the power on) and take out the Dell Series 5 black cartridge and then reseat it. I would then take out the color Dell Series 5 ink cartridge and reseat it. Now close the printer and it will print an alignment page.

Any error messages?

black cartridge = black side(left side) color cartridge = color side(right side)

photo cartridge = black side(left side) color cartridge = color side(right side)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges .

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

It's possible to get a Dell Series 5 ink cartridge with a bad sensor. I would that these back to the place of purchase for a replacement or a refund.


Rick

Jul 27, 2011 | Dell 946 All-In-One InkJet Printer

1 Answer

We keep getting left cartridge incorrect message?


Are you using Dell Series 5 ink cartridges?

If you unplug the printer from the wall and remove the power brick for 60 seconds, this will reset any error messages the printer has. I would then plug everything back in.

Power on the printer.

Open the printer(with the power on) and take out the Dell Series 5 black cartridge and then reseat it. I would then take out the color Dell Series 5 ink cartridge and reseat it. Now close the printer and it will print an alignment page.

Any error messages?

black cartridge = black side(left side) color cartridge = color side(right side)

photo cartridge = black side(left side) color cartridge = color side(right side)

Dell Series 5 ink cartridges have a sensor in them that cannot be reset. Article on refilling Dell ink cartridges .

Dell Series 5 ink cartridges can be purchased at Staples, Walmart or Dell's Website.

It's possible to get a Dell Series 5 ink cartridge with a bad sensor. I would that these back to the place of purchase for a replacement or a refund.


Rick

Jun 12, 2011 | Dell 946 All-In-One InkJet Printer

1 Answer

How to reset the ink cartridge


Hi,you can use this link to reset your printer.

hubpages.com/hub/Reset-Epson-Printer--Ink-Counter-and-Ink-Cartridge

Hope it helped.

Thanks for using fixya...

Oct 27, 2010 | Epson Stylus Photo R300 InkJet Printer

1 Answer

New printer. Black cartridge doesn't work. No black on test sheet


Try

Resetting the Ink Counter When an ink tank is replaced, the ink counter must be reset. The low ink warning is only displayed properly if the ink counter is reset.

Message Prompting Confirmation of Ink Tank Replacement
If an ink tank is removed, the printer will output a message prompting you to confirm replacement of the ink tank at the start of the next print job.
When an ink tank has been replaced, follow the procedure below to reset the ink counter. The low ink warning is only displayed properly if the ink counter is reset.
Important
If infrared communication is performed in Windows XP or Windows 2000, the printer will not output the message asking for confirmation of ink tank replacement.
Reset the ink counter from the printer driver when you replace the ink tank.

1 Check the message, and click Yes.

Note
Mistakenly clicking No instead, will prevent the low ink warning from functioning properly. If this happens, be sure to open the driver's Properties dialog box and manually reset the ink tank counter in the Maintenance tab.


2 Select the replaced ink tank, and click OK.
The dialog box allows you to select the replaced ink tank.
When both black and color ink tanks have been replaced, select both Black and Color.
If you have not replaced the ink tank with a new one, click Cancel.

Resetting the Ink Counter in Printer Properties dialog box

1 Open the Printer Properties dialog box and click the Maintenance tab.
2 Click Ink Counter Reset.
3 Select the newly installed ink tank, then click OK.

Sep 30, 2009 | Canon PIXMA iP90 Mobile Printer

1 Answer

New black cartridge installed. Won't print. HELP please.


Try

Resetting the Ink Counter When an ink tank is replaced, the ink counter must be reset. The low ink warning is only displayed properly if the ink counter is reset.

Message Prompting Confirmation of Ink Tank Replacement
If an ink tank is removed, the printer will output a message prompting you to confirm replacement of the ink tank at the start of the next print job.
When an ink tank has been replaced, follow the procedure below to reset the ink counter. The low ink warning is only displayed properly if the ink counter is reset.
Important
If infrared communication is performed in Windows XP or Windows 2000, the printer will not output the message asking for confirmation of ink tank replacement.
Reset the ink counter from the printer driver when you replace the ink tank.

1 Check the message, and click Yes.

Note
Mistakenly clicking No instead, will prevent the low ink warning from functioning properly. If this happens, be sure to open the driver's Properties dialog box and manually reset the ink tank counter in the Maintenance tab.


2 Select the replaced ink tank, and click OK.
The dialog box allows you to select the replaced ink tank.
When both black and color ink tanks have been replaced, select both Black and Color.
If you have not replaced the ink tank with a new one, click Cancel.

Resetting the Ink Counter in Printer Properties dialog box

1 Open the Printer Properties dialog box and click the Maintenance tab.
2 Click Ink Counter Reset.
3 Select the newly installed ink tank, then click OK

Sep 30, 2009 | Canon PIXMA iP90 Mobile Printer

1 Answer

Waste ink absorber?


Hi. As you have not mentioned the make and model of the printer, I am giving here the procedure to reset waste ink counter applicable to most printers. Hope it helps.
Canon Pixma iP1200, iP1600, iP2200 Resetter
  1. Download software for Canon iP1200, iP1600, 2200 Printers.DOWNLOAD Service Tool Software for Canon Pixma Printer iP1200, iP1600, iP2200
  2. Unzip downloaded file by WinZip, 7Zip, Izarc, etc
  3. Run GeneralTool.exe
  4. Select the connected USB port number from USB PORT
  5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
  6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the platen waste ink counter.
If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

If you have a different printer model, then please tell me and I will research that for you. Thanks.

Jul 29, 2009 | Canon PIXMA iP1600 Printer

1 Answer

RX700 Ink drip reset counter?


which buttons do I press when turning on my RX 700 after changing the ink pads which will reset ink drip counter? Thanks

Jun 02, 2009 | Epson Stylus Photo RX700 All-In-One InkJet...

1 Answer

Change ink in my dell 946 printer


Read the Ink Cartridge maintenance section of the user guide:

http://support.dell.com/support/edocs/systems/924/en/index.htm

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Apr 12, 2009 | Dell 946 All-In-One InkJet Printer

1 Answer

Dell 946 new ink still says low ink


You can't. Certain cartridges are not able to indicate a fully charged cartridge after having been refilled. This is due to the fact that they have an ROM chip---Read Only Module--that is not programmable after it has been "used up" by indicating an empty ink reservoir.

Mar 30, 2009 | Dell 946 All-In-One InkJet Printer

1 Answer

Canon F60 Waste Ink reset


I had the same message "check printer. press resume key". I cleaned the encoder strip and reset the waste ink volume counter like 6 times and it helped. To reset the waste ink volume counter, follow the steps below. (These steps were originally posted by NerdRUs.):

Resetting the Waste Ink Volume Counter
1) Enter SERVICE MODE.---
By pressing Menu-Copy-#
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.

May 11, 2008 | Canon MultiPASS F60 All-In-One InkJet...

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96417 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...