Question about Belkin PC Desktops

1 Answer

Hi, ive just purchased a belkin adsl2 wireless router for home. My old router works fine but when i swich to the belkin all i get is a message telling me theres no dial tone and i have to work offline. i've been to the belkin router page (192.168.2.1) and done that but i still get the no dial tone message. can u help please?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Icon with vista

Posted on Jun 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect ps3 to belkin adsl2 modem with high speed wireless g router ? We have just changed our old belkin (cut out every time the phone rang) for this model and its working 10 times better with...


Network status can be checked in PS3 settings - it says whether the PS3 is connected to the network or not. If you see that it is OK, then you can check the router - it usually lists attached devices, also enable UPnP option if it is not ON yet.

If you have a problem with PS3 in wireless mode - try to connect it to the router with a Ethernet cable (configure PS3 network settings correspondingly) - if it works this way the problem most likely in wifi configuration either on the router or the PS3 side.

I hope this can help

Oct 05, 2009 | Belkin PC Desktops

1 Answer

Belkin wireless adapter


Sometimes wireless phones will interfere with the signals. If the router or PC is anywhere near a phone, it might have a problem. I have one wireless network card that gives me fits like that. I have yet to get a PC working with it. I have other wireless cards that work fine. I also switched to 5GHz phones, which helped my old laptop. Check to make sure there's not a conflict with the encryption used by either the dell or the router.

Jan 19, 2009 | Dell Dimension 2400 PC Desktop

3 Answers

Unable to reset a Belkin Wireless N F5D8236-4v1 back to default


That is indeed strange. Holding in the reset button should definitely clear the wireless router memory. Are you sure that you're going to the right administration page to configure the router? It should be something like 192.168.1.1.

Also... by any chance are there other wireless networks nearby? I'm wondering if your computer accidentally connected to that while the wireless router was off... and now you're going to the wrong router.

If none of that works, try leaving the router unplugged for about five minutes. The volatile memory shouldn't last much longer than that.

Dec 24, 2008 | Belkin PC Desktops

1 Answer

I am replacing BT 105 modem with a Belkin adsl2 modem with wireless g router. The 105 has a blue cable with a square connector. I tried to put the yellow supplied cable in the back of my computer but it...


no, but you need to configure the router to connect to the internet, you should have a "quick start guide" that will help you connect to your router and set your ADSL dial settings (as it needs this to connect you to your internet service)

once these connection settings are set you should be able to connect to the internet

you can then explore the other settings including the wireless configuration of your router

Oct 03, 2008 | Belkin PC Desktops

1 Answer

My computer doesnt seem to be working with my Belkin router. I have yahoo sbc and my modem works fine, but once I connect it to the router it can't make a connection


I use a belkin wireless adaptor for connecting my PC to the wireless router of trendnet, i observed that belkin adaptor does not work with standard windows wireless networking , i downloaded a separate suite provide by belkin for the purpose and voila- even my 8 yr old son and now reconnect if connection is broken :)

Sep 26, 2008 | PC Desktops

1 Answer

Hi, i have a belkin adsl2 modem with wireless- g router model f5d7632-4 and it was working fine but now i am getting no connection at all (no adsl light) checked all my wires/filters am stuck! i am on...


Check with your Network provider, and ask them if they can run a line check. No adsl can be problem with either the line or hardware.

But before that do check with your modem as well.

May 06, 2008 | PC Desktops

1 Answer

I purchased a Belkin N1 Wireless USB adapter recommended to me by PC World but it is not working correctly. It WILL locate my network but will NOT allow internet access on it. I did ask specifically in the...


Hi there!

Theoretically, it should work with each other. I didn't find any documentation at Belkin's site that states the N1 USB adapter being not compatible with 3rd party devices like your Netgear router.

From what I know is N-Draft's wireless technology should be backwards compatible with both wireless-B and wireless-G devices.

1. Do you have other working wireless devices at your network during that time that you have the N1 USB adapter?
2. Were you able to connect to your wireless network? If Yes, what was your IP address at the wireless computer incase you had the chance to check it?

Maybe you can try to inquire with Belkin about what you've encountered with their device for clarification.

Hope this helps!

May 04, 2008 | PC Desktops

1 Answer

Belkin wireless g problem


well..that passphrase is from a secure connection..you might need to get a new set of drivers, and re install that router.

go here for those drivers(look for Belkin router)

Mar 25, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belkin PC Desktops Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

657 Answers

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Are you a Belkin PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...