Question about Samsung HL-R5677W 56" HDTV

1 Answer

Hl-r5667w Comment by jsilva1963, posted on Jun 21, 2008 only lamp flashes , buzzing is not constant it starts low gets loud then stops like for 1 second then start all over again model # is hl-r5667w

Posted by on

  • jsilva1963 Jun 21, 2008

    where on bulb do i check for arc gap also i check ballast by looking and moving it it looks ok is there a way of testing to see if its working???

    sorry it took time to answer you i went back to store and exchanged blub just in case its defective , put it in its still doing the same thing..

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 8,617 Answers

I just responded to your other post check the connection between the lamp and ballast at both ends. Also did you get the same exact lamp as your old lamp, as Samsung has two different arc gaps and they wont work if you get the other type even though they look the same physically.

Posted on Jun 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HL-R5667W Picture just went blank, no sound. When you turn on tv the timer,lamp and stand by/temp light all flash. When you turn off, just lamp light flashes.


two things to check here:

1. remove the lamp and examine it to make sure it is not shattered inside.

2. if the set had a high pitched or fan like noise before it failed, the color wheel needs to be looked at--I can tell you a easy way to do this.


Look at the lamp first--life span is 2000 hours.

I am here to help and the more you tell me the better I can help you.

SD TECH Steve

Jun 10, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Samsung DLP HL-R5667W not turning on. Showed


Purple spots means Bad Light Engine Part number is BP96-00822J Encompass Parts Has them for
$950.00 - $350.00 core price Part $600.00
1-800-638-3328 Lamp# BP96-01073A

Ballast Board# BP47-00027A

Jan 08, 2010 | Samsung HL-R5667W 56" HDTV

1 Answer

Samsung DLP HL-R5667W lamp won't fire. Changed lamp & ballast and still won't work. Fans are working fine, color wheel good. Lamp door switch good. When I power on, I hear ballast buzz like it's trying...


Was the replacement lamp the same part number as the original as there are different arc gaps for different lamps and the wrong arc gap will cause the lamp not to light. Since the ballast is powering up the lamp should light if the baalast is matched to the correct arc gap of the lamp being used.

Nov 27, 2009 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

I have a Samsung HL-R5667W that is about 3 1/2 years old. The screen is dark except for occasional flickers of light. The lamp appears to be giving off light when I look in the back. I replaced the bulb...


Hi my name is Eric,
I hope I can help you with your issue ,
Most likely your colorwheel is bad,
second possibility is the digital board.
Both are for a technician to install, you could do more damage poking around inside the TV.
 
 
 
If I have helped you with your issue please click accept.
If you have more questions you can still respond until this post expires,
I will reply asap
Thanks
Eric

Sep 26, 2009 | Samsung HL-R5667W 56" HDTV

1 Answer

I have a Samsung HL-P5063W. Once it warms up there is a loud buzzing noise coming from insude the rear of the TV. The fan is running all the time. lamp is about a year old.


Your symptoms sounds like the set may have a damaged color wheel.

It is also possible that you have a noisy fan, but they don't get very loud.

I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up) If you cant rate this post with the highest rating, then please comment to this post and I will try to help you further.

Jun 30, 2009 | Samsung Projection Televisions

1 Answer

Samsung HL-r5667w TV shuts down on its own.


You may have a colorwheel going bad. The bearings start going out and this is an indication of the failure. The colorwheel is located in the light engin e therefore you may want to get a qualified tech to look at it

Dec 16, 2008 | Samsung HL-R5667W 56" HDTV

1 Answer

Dlp tv problem


Is the lamp light the only one thats flashing? Does the buzzing your hearing stop or is it constant? Also when you press power off does the buzzing stop instantly or continue? Respond to this post and I will try to assist you. Is HL-R677w the correct model number also?

Jun 21, 2008 | Samsung HL-R5677W 56" HDTV

Not finding what you are looking for?
Samsung HL-R5677W 56" HDTV Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...