Question about Dell 924 All-in-One InkJet Printer

1 Answer

Help Printer wouldn't print so I unplugged it over night. plugged it in this morning and nothing comes up on the display, I can't turn it off and my computer doen't even read that my printer is plugged to it via usb.

Posted by on

  • chicagoloss Jun 21, 2008

    Warranty has expired, display says nothing but the power button is on and steady green. only way I could turn it off was to unplug it.

  • avera1987 Jul 04, 2008

    I have the same problem! I even called Dell support and they don't know what to do. The light is steady green and there's nothing on the little display screen. I tried pressing all the buttons and nothing works. The warranty expired and I want to throw it out the window. PLEASE SOMEONE HELP!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 197 Answers

Hmmm..sounds like a truly unhappy printer..unplug from computer...power down printer..wait 5 min..power up again..see what it says on panel..if it does not power up, then you either have a bad power supply or a bad control board internally

you have a warranty on this item?

Posted on Jun 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The printer only prints the centre 15 cm section of the page. It completely cuts off the top and bottom.


Try unplugging your communication cable and turn everything off. Turn everything back on and plug in the cable. If that doesn't work delete the printer from your printer list and re-install it. Usually in this type of scenario it's a communication issue.

Feb 21, 2015 | HP Color LaserJet 9500HDN Printer

1 Answer

My Motorola electrify won't turn on or charge. It


maybe your battery or your phone os .... try a new battery if nothing happens... try re flash your phone

Jun 02, 2013 | Cell Phones

1 Answer

Sony KL-50W2U rear projection TV stuck in standby


Try holding down the power button until it turns off and then turn it on again.

Nov 29, 2012 | Sony KL-50W2U

1 Answer

My LG portable AC Model #LP1111WXR wouldn't turn off had to unplug it. Now won't turn on.


Unplugging the unit lets the tiny computer like microprocessor reset--means problem is in the brain of the unit or its power circuit.

Jun 14, 2012 | LG 11,000 BTU PortabAir Conditioner -...

2 Answers

Km-2030 Checksum error f1


my copier is displaying error code 100, whats the problem km 2030

Jan 21, 2009 | Kyocera FS-2000D Laser Printer

1 Answer

Ink system failure, and printer turns itself back on..


Try the following reset:

Hold the OK and the Help button at the same time. While holding them down, plug the power in. Continue to hold both buttons until the unit shut off.
After shutting down, release both buttons and power on the printer.

Alternatively follow instructions on this document from HP.

Sep 29, 2008 | HP Photosmart C5180 All-In-One InkJet...

1 Answer

Top light with (x) blinking


Fixed this problem this morning by unplugging the printer from the computer, plugging it back in and changing out both cartridges (color and black) and replacing with new cartridges.

Don't know which helped. I had been unplugging the computer from the power source but not the printer from the computer.

My four year old printer is still cranking - good open forum you provide here. Thank you !
In that spirit, I decided to contribute my update ..... Judy

Sep 12, 2008 | HP DeskJet 5550 InkJet Printer

1 Answer

When i send a print nothing happens. I opened the lid to check for a jam. nothing. but when i closed it the screen on mu printer says carriage jam.....


Sounds like the "deadly embrace" problem...

Computer says to itself "waiting on printer status"
Printer says to itself "waiting on computer status"
Results....nothing.

Try this:
1. Shutdown (using the normal operating system shutdown) the computer.
2. Turn off and unplug both the computer AND the printer at the same time.
3. Plug the printer back in first (and if necessary, turn it on) THEN
4. Plug in the computer and allow it to start normally.

Now try a print.
Let me know if this works for you.

Jun 19, 2008 | HP OfficeJet 6210 All-In-One InkJet...

2 Answers

Printer will not finish 'booting up'


remove the power cable directly from the back of the printer, press and hold # and 9 while holding both these buttons put the power cable back to the printer. now let the buttons go when the on light starts flashing

Dec 28, 2006 | HP OfficeJet 7410 All-In-One InkJet...

Not finding what you are looking for?
Dell 924 All-in-One InkJet Printer Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

seerads

Level 2 Expert

77 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...