Question about Vivitar MAGNACAM Binocular
My camera works fine, but then when i plug the camera in with the USB cord, it says power surge on hub port, the device has exceeded the power limits on its hub port. click here for help.. so i click and it comes up with a screen that says disconnect your camera and press reset. when i do, nothing happens. I pulled the USB cord, pressed reset and plugged it back in. Same problem over again. We then pulled every USB out, one at a time, pressed reset and put it back in. Never ever found the problem, but the Warning has stayed.
Try to change a new USB cord, and if it does not work the problem is a device then
Posted on Jun 26, 2008
Try plugging the camera directly into the computer usb port if you have a spare port open.
IF you don't have a spare usb port, unplug an usb device that you don't need and connect the
camera. You may have to unplug more than one device to get it to work. This camera does not connect if plugged into a usb hub device but it works fine if you plug it into the computer's usb.
Posted on Feb 13, 2009
Tips for a great answer:
Sep 06, 2010 | Tasco Snapshot 1025S Monocular
Dec 25, 2009 | Sharper Image Binoculars & Monoculars
Oct 20, 2009 | Vivitar MAGNACAM Binocular
Oct 27, 2008 | Bushnell ImageView 111025 Binocular
Apr 28, 2008 | Vivitar MAGNACAM Binocular
420 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: