Question about Kenwood KDC-MP235 CD Player

4 Answers

I recently bought a kenwood stereo from cash converters, which is a pawn shop i guess you could call it, now it seems i need a code for it, is it possible to get one or recode it? maybe wasted the money but would like to use it if i can

Posted by on

  • redsatt Jun 22, 2008

    i didnt have the model number for my car cd player in my last post, its a kenwood KDC-MP2028, i bought it second hand from a recycling store, cash converters, i have no remote, had no idea there was one for it at the time. can i use it or was it a waste if money with no code or remote? thanks

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 638 Answers

Without code or remode it is utter waste of money.
go to the link hope this helps you.
www.repairclinic.com.
go get the remote to get it work properly.

feel free 4 further assistance .rate the particular experts solution as fixya that helps u understand n solve ur problem

Posted on Jun 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Need to reset code in sterio
pull out radio
look on side of radio
there should say something like security with letter next to it this should be your unlock code for radio

Posted on Jun 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

Let me chk for one.

Posted on Jun 22, 2008

  • Legin Varghese
    Legin Varghese Jun 22, 2008

    kenwood SECURITY code CLEAR procedure
    Your radio will require one of the following procedures.
    Type 1
    During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds (so that “…” disappears).
    Then using your remote enter your code.
    Type 2
    Press the "Auto" button and "Track up" on face of radio at the same time. The four dash lines ( . . . . ) should "disappear".
    Then using your remote enter your code.
    Type 3
    Model# DPX-4020 and DPX-4030
    Press and hold the 1 then the 6 preset key (preset keys are the buttons on face of radio for storing you "favorite" radio stations). "C" should display.
    Then using your remote, enter your code.
    Enter your number from the remote control unit. Your code number is 5227 (KCAR)
    * Press numeric key “5” ( 2 times ) and press the Track UP/Next Track key
    * Press numeric key “2” ( 3 times ) and press the Track UP/Next Track key
    * Press numeric key “2” ( 1 time ) and press the Track UP/Next Track key
    * Press numeric key “7” ( 2 times ) and press the Track UP/Next Track key
    The security is canceled and the set enters the TUNER mode!
    when finish all the procedure, is necessary to press "TRACK UP BUTTON" for 3 seconds.. and youre done.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenwood Master
  • 19,396 Answers

You need to provide the model number to unlock it

Posted on Jun 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program a new kenwood RC557 remote with my kenwood KDC-MP2035 stereo?


Unless you are a super genius this cannot been done they are only meant to work with the same model, once i have pioneer that needed a remote it took me 5 tries to find the right remote i went to local pawn shop 10$ is what i spent try there, but take the remote to your car and make sure ALL i mean ALL every last one on the remote work properly

May 30, 2013 | Car Audio & Video

1 Answer

Starting up a kenwood KDC MP 149 car stereo


Try checking all of your fuses. You should have two fuse boxes, one in the engine compartment and another under the dash or in a kick panel inside of the car. There is probably a fuse on the back of the radio also.

Jul 19, 2012 | Kenwood Car Audio & Video

1 Answer

Kenwood Cd Player Won't Unlock?


Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

May 21, 2009 | Kenwood KDC-MPV5025 CD Player

1 Answer

Kenwood kdc-mp5028 cd player


recently had same problem when i brought the radio to the shop i brought it to him with all the wires in the back trimed so no copper was showing when i got it back the right rear wires had been stripped along with power and ground now as far to what happens behind the sences i dont know but i would guess they merge thee two and power it on and wait because it took they 4 hours to do mine

Dec 31, 2008 | Kenwood KDC-MP5028 CD Player

1 Answer

I bought a cd car radio from a pawn shop as is it now needs a code to work is there a way around this?


not really, take it back to pawn shop. if its not written on the unit it would cost more to get it unlocked then a new unit

Sep 01, 2008 | Kenwood Car Audio & Video

1 Answer

Code security


what i have done when i had one was i held the joystick on the player for about 3-5 seconds and then pressed the mode/power on the remote and it reset the player and entered in 0000 for the code and it works. just my personal experience.

Aug 30, 2008 | Panasonic CQ-VD7001U Car DVD Player

1 Answer

How do i unlock this product, i dont remember the code I have a Kenwood DDX6019 bought from a pawn shop they said it worked take it and have it installed and it says enter password the pawn shop will not...


Enter the security code using your Kenwood remote. For the DDX6019
The key sequence to enter the security code KCAR is: on the side of the remote there is AUD, DVD,TV. now enter 55 in the AUD then go to DVD and enter 2 which is fast forward then go back to AUD. Do the same for the rest.
5
5
fast forward
2
2
2
fast forward
2
fast forward
7
7
fast forward

Aug 22, 2008 | Kenwood DDX-6019 Car DVD Player

Not finding what you are looking for?
Kenwood KDC-MP235 CD Player Logo

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4737 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...