Question about Fisher Paykel Eco IWL16

1 Answer

Fisher paykel washing machine top loader model aw0850 fresh5

When machine was running on it's spin last cycle I switched it off. The power board stopped completely.
It looks to me I need a new board, there is a number on the power board 426119H.Inspecting the board the effected parts are few components next to the black trasformer, a number is attached to the trasformer 230v4 426204362719.
Can I get a circuit diagram for this power board.

Posted by on

  • bombersul May 11, 2010

    Hi Mate

    I have got the same problem with my F&P top loader and the same Top swich blew out also to was the 4 A fuse on the board. I also ordered a new TOP224FN as I could not find any TOP224F on the internet, I was hoping its just a rev of the existing electronic switch. Unfortunatly I recieved the new TOP224FN and installed and powered up and blew the fuse and also the switch.

    Did you manage to get your machine going with your new switch?? Im thinking that the N is a different voltage and maybe not suited to this application

    Regards

    Bombersul

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

On the morning of Monday 23/6/08, I have decided to measure the effected components on the control (power) board.
The control or power board is the one that supply the DC power to the DC motor which runs the tumbler of the machine.

I could see black marks around 3 leg component which is clamped against the cooling pipe on the board.
I decided to enter the component number the one printed on it in the internet Go ogle site.
The description of the 3 leg component was TOP224Y and is a switch and inspecting it reveals its casing was blowen and one of the leg was separated.
I decided to buy a new TOP224Y and there was only TOP224YN available no more TOP224Y.
The price is $10 something.
With a solder ****** I was able to dismount TOP224Y from the control board,
and when I will receive the new TOP224YN I will replace it.
In the same time I noticed a big diode next to TOP224Y was also overheated and cracked and a small glass diode was also cracked and need replacement. The transformer next to the TOP224Y is called fly transformer I had measured it with an ohm meter, it reads very low nearly zero ohm.
I will receive the new component TOP224YN tomorrow 24/6.

Posted on Jun 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fisher and paykel washing machine top loader doesnt spin dry the clothes well. There isnt any water in the machine after the spin cycle but the clothes are heavy wet. What's could cause this?


Machine not spinning. Have you stood next to machine and listened? When all water is drained out (watch the drain hose for water to stop) then you should hear the spin start and hear it building up speed. If it doesn't then you need to post back here with more detail on what you could hear or see happening. i.e. how long after water stopped draining did machine finish and switch off?

Nov 05, 2016 | Fisher and Paykel Washing Machines

1 Answer

Washing machine stopped during spin cycle. now when i turn it on it beeps and has 3 lights on, 2 wash lights and the spin light. model number is GW611 excellence. fisher & paykel top loader


Hi just read your posting.Now on the wash progress line of lights ,there will be 8 in this row.Starting from the left to the right which lights are lit.Is it the 2nd ,3rd and 7th or the 1st, 4th and 8th ---etc---?Please reply with additional information and I can help you rectify this fault on your machine.Looking forward to your reply

Jul 27, 2010 | Fisher and Paykel Washing Machines

1 Answer

WATER PUMPING IN SPASMODICLLY AND THEN THE BEEPS COME AND MACHINE TURNS OFF. i HAVE A FISHER PAYKEL MW058U TOP LOADER. SAME THING HAPPENS ON SPIN CYCLE.


there r 3 reasons this happens. 1st the out of balance switch is faulty. 2nd the rotor senor near the motor is faulty. 3rd your control board is faulty. have u got an electrical test meter to test the components? please reply 4 more help. 95% of the time the faulty part is the the out of balance switch.

May 01, 2010 | Fisher and Paykel Washing Machines

1 Answer

Machine will not spin or drain water.


I have a problem with my MW512AU. Sometimes it drains after wash cycle, but sometimes it sticks when it goes to spin, doesn't get up to speed, water comes on for about 10 seconds and shuts off, and it tries to spin again. If I hit the wash progress switch it goes directly to final spin and works ok. I then have to run a 2nd wash cycle to rinse the clothes. I also noticed a buzzing sound when I turn on the power point, which lasts about 3 seconds before stopping. It will come back on every 3-4 minutes for 30 seconds. This is with the machine power switch off. It powers on normally.

Mar 13, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

On our Fisher and Paykel, the spin cycle does not


ok guest you can set a fisher and paykel machine to skip one rince cycle so as to save water,

Feb 20, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

At spin cycle pump only runs for 3 seconds then stops


Sounds like the pump motor is overheating. Probably need a new one.

Feb 18, 2008 | Fisher and Paykel Fisher & Paykel Washer

Not finding what you are looking for?
Fisher Paykel Eco IWL16 Logo

425 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Fisher Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...