Question about Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher paykel gwl10 overfilling??

Several problems with this washer. First it was shutting down halfway throught the cycle..now its overfilling.

Posted by on

  • Anonymous Jul 17, 2008

    i've got the same problem, it washes the clothes but stops at the rinse cycle.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 639 Answers

Dear friend,
ngfam at you service!

You can not fix this problem your self!!!

This sounds like it will only fixed by service then you will be happy again!!

Yes sounds like you need service!
Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!

Happy to assist you,
PS. PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!

Posted on Aug 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fishwe&Paykel GWL10 won


It could be the out of balance switch faulty & need replacing.

Nov 17, 2012 | Fisher Paykel EcoSmart GWL15

1 Answer

I have a 10 year old Fisher & Paykel GWL10 washing machine. Fault code 1 is coming up. The machine turns completely off. The longer it cools down, the longer it goes before turning off again. This...


Code 1 - usually means on the later models of Fisher & Paykel is a faulty Motor Control Module, often though one would have to replace both as well as the display module.

Anyway - it sounds like the electronics are overheating hence the intermittent problems you are experiencing.

May 27, 2011 | Fisher Paykel EcoSmart GWL15

1 Answer

Fisher & Paykel GWL10 begins to spin for about 15 to 20 seconds, just starts to pick up some speed, then machine beeps and shuts down. Seems like the water is draining. Any ideas? It has also been...


Yes it does seem like a control module fault.Bit concerned about the noise coming from the machine even thou it is not running.Please turn it off at the power point when not in use.Now if and when it faults again please reply back with error code as per 1st posting.

Jun 11, 2010 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

I have a fisher paykel GWL10 washing machine. It shuts off while


At this stage i can suggest that the inlet valve may be faulty & giving off this burning smell.open the control box & see if one of the 2 inlet valves look distorted or brown or burnt looking.I'm wondering if it's not filling very fast also,this could also be an indication of the valve.

Jun 03, 2010 | Fisher and Paykel Fisher & Paykel Washer

1 Answer

I've got a fisher paykel gwl10 top load washing machine


Check the pipes leading to water pump for wetness also the door seal,If all pipes are dry and look ok then it could be due to the water seal and bearings braking down.

Jun 06, 2009 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Fisher & Paykel wahsing machine GWL10 stuck in rinse cycle.


no power from the control board to the diverter.replace control board.it is about $150.00 for the part

Jan 21, 2009 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

I have a gwl10 and during the wash cycle there is water coming in but the drain pump keeps running during the fill cycle.


The pump itself is supposed to run during the fill portion of the REGULAR cycle. It is supposed to be mixing the incoming fresh water with your laundry detergent and pouring the solution on your clothes as the tub rotates slowly. If the water is draining out of the machine, then there has been some sort of issue with the DIVERTER VALVE. It either has a broken lever on it or an object has become wedged in it, holding it open all the time. If you try the PERMA PRESS cycle, you will probably find that cycle will work, as it does not use the recirculate function.

I would check the diverter valve first. You can tip the washer back and remove the hose clamps with no tools and shine a light up inside and look for an object. You also can inspect the lever and will clearly see if it is broken.

If the washer needs a diverter valve, the part number is a 426862P and is easy to change. You can get them from Fisher Paykel Parts:
http://www.fisherpaykelparts.net/111-4/Diverter-Valve-GWL10-11-15.php

They also have downloadable service manuals (but I have pretty much told you what you need here)
Here is the GWL10 manual:

http://www.fisherpaykelparts.net/115-15/GWL10US-Service-Manual.php



Dec 19, 2008 | Fisher and Paykel Fisher Paykel Intuitive...

1 Answer

Fisher and Paykel Smart Dribe 608


not familliar with that exact model number ( we dont have that over here in the US) we have simalair f&p gwl10- gwl11) that problem sounds as if either the pump is bad and overheating before pumping all the water or a diverter valve is not fully closing allowing water to remain in tub.














Mar 29, 2008 | Washing Machines

1 Answer

Fisher & Paykel GWL10 US won't spin


its possible that the pump is either going bad or there is somethin gin the pumps/sump assy. on this model the unit generally tends to shut down when the pump overheats, and will only restart when the pump cools off, a warnig obout replaing hte pump if need be is the pump is actually 220v. you MUST UNPLUG MACHINE BEFORE SERVICING. its a foriegn brand remember so theres abuncha wierd wiring and the pump is one of them!

Mar 25, 2008 | Fisher and Paykel IWL12 Top Load Washer

Not finding what you are looking for?
Fisher and Paykel GWL11 Top Load Washer Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...