Question about Roper MHE13XH Microwave Oven

1 Answer

Light shorted out when tring to get bulb out .

The fan does not come on light does not come on turn table does not work .
The timer works but the rest does nothing .how do es one fix this.it is wall mounted.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Roper Master
  • 8,862 Answers

We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

We even have a video on our site that shows you how to safely & easily remove the control panel assembly to send it for service.

We're happy to help and we appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

Posted on Jun 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I set timer and press start the timer runs for two seconds and turns off. The turn table nevre starts


take it in for service or just buy a new one . probably cost more t fix than a new one would be

May 08, 2015 | Microwave Ovens

1 Answer

Turntable, lights and fan inop


sounds like a cross wire, and a short. I'd inspect the socket for the bulbs to ensure that there's no short circuit.

Feb 11, 2008 | Magic Chef CMV1000B Microwave Oven

1 Answer

My Frigidaire microwave stopped working while cooking food.


All lights are operational. Model number is FMV156DBC.

Aug 29, 2009 | Frigidaire FMV156DC Microwave Oven

1 Answer

Micro doesn't cook,vent or light, but timer works. Estate TMH14XM


We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid in about a week.

At our Web site, you can get details of our service, plus we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

The lights fan can be inoperable or stuck on or no bright, too. Sometimes this will similarly affect the exhaust fan operation, too.

Feel free to contact me directly (and please remind me of your full model number from the tag on the unit) for more information & help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

Jun 10, 2009 | Estate TMH14XL Microwave Oven

1 Answer

Danby microwave not heating


yes the turn table turns, everything works, but no heat.

Jul 02, 2008 | Microwave Ovens

1 Answer

Did I short something out?


We see (and repair) this a lot. The problem is on the control panel, which we regularly repair nationwide by mail for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This can often also affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on too.

Details of our service and critical safety information and disassembly information is at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

We're happy to help and we appreciate your thoughtful rating of our answer.

William E. Miller, AS-EET
prototech@usa.net
http://www.microwavedisplay.com

Apr 14, 2008 | Roper MHE13XH Microwave Oven

2 Answers

Magic Chef mco153ubf


I had the same problem. My Magic Chef, MCO153UBF Microwave had similar problems. The Magnatron, Cooling fan, Turn table and under hood lights were not working at all after hearing a pop sound under the control panel. Thought it was the fuse but the fuse was fine after testing and replacing. I checked the circuit breaker wired to my house and saw it had a break to my kitchen outlets so i flipped the switch to get back the kitchen outlets. Then I checked the microwaves Control Panel ( Printed Circuit Board) underneath and saw to traces were burnt. I soldered the two trace lines and the fixed the problem.

Nov 19, 2007 | Magic Chef CMV1000B Microwave Oven

1 Answer

Hood lights do not turn off...


The problem is on the control panel, which we regularly repair nationwide for $39.95 postpaid.

This is far less than a replacement circuit board, assuming it's even available anymore.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This often can affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on.

We have full details and critical safety information and disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk

Nov 15, 2007 | Sharp R-1481B Microwave Oven

1 Answer

GE JVM1450WA01; Lights do not work, -- both blown and replaced.


We see this a lot. The problem is almost certainly on the control panel, which we regularly repair nationwide for $39.95 postpaid.

This light failure often occurs when a bulb goes out and the filament shorts, or when the bulbs are removed or installed without first unplugging the oven from the power line. Either can cause such a failure on the controller.

This often can affect the exhaust fan operation, too. The lights and fan can be inoperable or stuck on.

Details: If you or a friend decide to look into it, we have critical safety information and disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk

Nov 13, 2007 | Microwave Ovens

4 Answers

Magic Chef Over-Range Microwave Oven Model:MCO153UBF


The turn table and fan are connected in series with the bulb,as you have mentioned that you have replaced bulb,so please check again for any loose contact on bulb holder or bulb continuity again.

Aug 03, 2007 | Magic Chef CMV1000B Microwave Oven

Not finding what you are looking for?
Roper MHE13XH Microwave Oven Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roper Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8862 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

bigdawg7299

Level 3 Expert

2436 Answers

Are you a Roper Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...