Question about AEG Kitchen Ranges

1 Answer

What's the best way to tidy up the sealing compound that is provided with my AEG cooktop once it's installed?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 135 Answers

Remove with a razor blade or putty knife.

Posted on Jun 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the cooktop


Hello Brent Beatty, thanks for your inquiry!
I see that you need to remove the old cooktop from your Frigidaire range, CGES3065K6. I was unable to locate any step by step instructions on how to remove the old cooktop. I did locate a parts manual which provides a thorough breakdown of all the parts within your range. If you need additional assistance regarding your cooktop replacement I would highly recommend reaching out to an expert technician to ensure the appropriate replacement part is installed correctly to prevent future issues. I hope this information helps to some degree - thanks for your question, and please do not hesitate to reconnect. -Matt
Frigidaire Manual Search Results

Feb 06, 2015 | Frigidaire Kitchen Ranges

1 Answer

How to access under cooktop on sealed burner gas range.


There should be some screws just under the front lip of the oven or just inside it. Remove them and the top should lift up.

Jan 23, 2015 | Tappan Kitchen Ranges

1 Answer

Replace cooktop


Igniter? Is this a gas range (cooktop) or electric? How about providing a model number; or a picture of your cooktop and the igniters you want to disconnect?

Sep 18, 2014 | Kenmore Kitchen Ranges

1 Answer

Managemylife com


From the manual:

To turn the Cooktop Lockout Feature OFF:
1. Press and hold (_ until "CLO" appears (Figure 3). Continue holding
until a second beep sounds (after 3 seconds). I_1will disappear from
the display indicating the cooktop may be used normally (Figure 4).
Note: Starting a Self-Clean cycle will automatically turn ON the Cooktop
Lockout feature. The cooktop will remain locked until the Self-Clean cycle
has completed and the oven door has unlocked. If a power failure occurs
after the Cooktop Lockout has been activated, you must turn OFF the
Cooktop Lockout feature before being able to use the cooktop features
again.

Dec 14, 2013 | Stoves Kitchen Ranges

1 Answer

How to replace glass cooktop on oven


Hello k10251985 - Usually this type of data is not release to a consumer and it is very rare to find enough information to do it yourself. In most cases this material can be found on the internet; however it is not provided directly from the manufacturer. Typically this is something that you want a certified professional to install/remove for you due to safety and liability reasons. They also usually warranty their labor just in case something else may turn out to be the root cause of your initial problem. Consider contacting your manufacturer for more details on who in your area may guide you through this process.

Feb 16, 2013 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

My 36" sealed gas cooktop


I had that problem also. It seemed to me that when anyone set the flame too high for the size of pan, the burner overheated. Then when the burner was turned off the igniter made clicking noises for a few hours...till it cooled down.

When I cooked at a lower setting all was ok.

This is free help...please take time to rate me....good luck.

Jul 25, 2011 | GE Kitchen Ranges

1 Answer

My spark module is probably out, but I don't know how to open up the range to look at it/replace it. How is this done?


Most newer ranges with sealed burner cooktops can be a little bit tricky to open. People have a tendency to try and lift the cooktop up like on the older ranges and end up damaging the range and causing a gas leak. The first thing to do is to unplug the range of course. Then start by removing the rear panel of the range. From there you can get a visual feel of what you are up against. With the back panel removed you should be able to see into the top part of the range. Most newer sealed burner cooktops require you to disconnect the screws holding the burner tubes to the bottom of the cooktop. If you do not remove these screws you will break the tubes when you lift the cooktop. Most of the time the screws are removable from the top at the burner heads. Once these screws are removed you should be able to lift the cooktop up. From there the ignition wiring and spark module should be available now for servicing.

Apr 24, 2010 | Amana ARGS7650 Electric Kitchen Range

1 Answer

Hotpoint RGB745 - how to lift cooktop panel to clean underneath?


hey thats not a hard one for you.kill the power to your range [breaker ok]under neath the cook top frount where the top of oven door meets the cook top.in there are screews into the cook top .remove and lift up cook top it is hinged in the back .clean ,then put back together.you got it God bless ,tom

Jan 06, 2009 | Hotpoint RGB745 Gas Kitchen Range

1 Answer

Front side heat element with ring wont light on ( or heat up)


These type of elements are often known as dual elements. They usually have two separate coils. More than likely the center coil has failed. They cannot be repaired and, in the case with your range, cannot be replaced separately. You will need to replace the entire element. Searspartsdirect.com carries parts for your range. Just type in your model number and locate item numbers 5301 and 5302 under the "Cooktop" heading. I do not know which front element your are talking about, but there is a price difference. No, thay aren't interchangeable. They have different wattage ratings. You will need to determine which one it is that you're having problems with. Replacing a single element is not difficult. It can be accomplished easily by following these instructions:

1. Unplug the range before servicing. Even with the unit turned off, there are potentially dangerous voltages present on the wiring harness.
2. Open the oven door and locate the two screws that hold the cooktop in place under the front edge. CAUTION: Do not put any weight on the oven door. You can cause damage to the door springs. Once you remove the screws to the cooktop, close the oven door.
3. With the screws removed, the cooktop will lift up.
4. Use something to prop up the cooktop, or a second person to assist, and carefully remove the mounting bracket to the two front elements. They are assembled together on the same bracket piece.
5. Gently lay the entire assembly on top of the oven box, leaving the cooktop propped up. Disconnect the wires to the affected element and unscrew the mounting clips. NOTE: There are numbered mounting holes on the element, pay attention to which numbers the clips are screwed into.
6. Remove old element. Install mounting clips to new element and reconnect wires. Install new element in mounting bracket and carefully lift back into place on the cooktop and install. NOTE: Use caution when handling the elements, they are extremely fragile. DO NOT touch the ceramic material, or electric coils with your bare hands. Oil transfer form your hands can cause potential hot spots, leading to premature failure of the element.
7. Lower cooktop and secure back in place.

The repair procedures are pretty straight forward. If you have any questions, please let me know. I hope this helps you.

Aug 18, 2008 | LG LRE30451ST Electric Kitchen Range

1 Answer

Cooktop


IF THIS IS A SEALED BURNER GAS COOKTOP, AND YOU LIFTED THE TOP, YOU HAVE PROBABLY DAMAGED THE ALUMINUM GAS TUBING THAT GOES TO THE FRONT BURNERS. THEY WILL HAVE TO BE REPAIRED OR REPLACED BEFORE YOU NEED TO WORRY ABOUT REINSTALLING THE TOP.

Mar 24, 2008 | Maytag MGR5729 Kitchen Range

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you an AEG Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...