Question about Sony VPL-EX1 Multimedia Projector

2 Answers

Need asistent please help me, I have LCD projc sony VPL-EX3 but the lamp can't be to live please tell me what can I and how to reset to do this, thanks alots bofore

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds like you have a dead lamp. This projector seems to have a desing fault where the filtration system is ineffective. Even though you lean the filters, dust buildsup around the lamp and blocks the small airvent flow built into the lamp housing. Lamp overheats and fails. We currently get 600-800 hours from a VLP-EX3 lamp.

Solution - Replace lamp. Ideal solution - Replace projector, avoiding SONY

Posted on Jul 03, 2009

My sony vpl ex3 will not light up, has a lamp/cover light on all the time can somebody help

Posted on Jul 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony VPL-EX3 "Lamp cover problem", it wont switch


There is a small switch that detects when the lamp cover is securely tightened down, so that it protects the user from the high voltages, hot surfaces, excessive bright light in the eyes, and damage to the face if the lamp implodes due to old age and overuse.
so check if the switch operates when a toothpick is pushed up and down in the cavity.This model suffers this problem when the cover is slightly warped with old age.
so put a strip of folded paper between the cover plastic protusion that actuates the switch and the switch and secure the cover and see if this is all that is needed to activate the switch properly.

if it now works, you can try putting a small drop of silastic on the cover protusion and wait till it sets over several hours in order to lengthen it slightly so that it reaches the switch properly

Jun 30, 2011 | Sony VPL-EX3 LCD Projector

1 Answer

Comme on RESET LAMP Videoprojecteur SONY VPL EX3 procedure ?


Hi,
You can reset lamp timer of VPL-EX3 by following procedure.
Connect power cord in wall socket, standby indicator will lit red.
Press following keys on projector remote.. RESET, Left arrow, Right arrow, ENTER
Lamp timer will reset.
Hope this will help.
Thanks.

Mar 22, 2011 | Sony VPL-EX3 LCD Projector

1 Answer

Have replaced the lamp in my sony VPL-EX3 projector and i want to to know how do I reset the lamp hours masembe christophers


Press the following keys on the remote control in the following order for less than five seconds each:
good_help_6.png

Feb 19, 2011 | Sony VPL-EX3 LCD Projector

1 Answer

I have replaced the lamp in my sony VPL-EX3 projector and it won't turn on how do I reset the lamp hours


Hi,
DO the following for resetting the lamp hour
1.Connect the power cord.
2.Press the following keys on the Remote Commander in the following order for less than five seconds each: RESET, Left Arrow button, Right Arrow button , ENTER.
ok

Feb 09, 2011 | Sony VPL-EX3 LCD Projector

1 Answer

Sony VPL-EX3 projector on/off switch flashes green then turns red and the lamp/cover light is orange. Does this mean the lamp needs replacing or could it be caused by some other factors?


Possible that the lamp is faulty -if the hours have elapsed- check the lamp holder, the fitments.
check also the filters, clean and reset.
Make sure the power supply Unit is not having any poor soldering or faulty components to reduce the voltage output to the lamp thus making it shut down..

Jan 17, 2011 | Sony VPL-EX1 Multimedia Projector

1 Answer

I have purchased 2 sony ex3 lcd projectors(one for spares,and one that needed a new lamp)I also have a new lamp!!But it wont work on either machines.All i get is flashing on/off light,then lamp cover...


you may have to reset the lamp hour meter to get it to work, put the projector on stanby and press the remote buttons, reset - back - forward - reset, (this is the code for a vpl hs20 projector it may be slighty different for your model)

Jan 14, 2011 | Sony VPL-EX3 LCD Projector

1 Answer

How do you turn the panel lock off on a sony vpl-ex3 lcd projector?


Pressing the On/Off Key for 10 seconds switches on and off the projector.
While on, press the menu key for 10 secods to reset it to unlock.

Jan 12, 2011 | Sony VPL-EX3 LCD Projector

1 Answer

How to reset lamp on sony lcd projector xga vpl-px20


Hi,
After replacing lamp, connect projector AC power cord and turn the projector in standby mode.

Press following keys on control panel for less then 5 seconds each..
RESET, <==, ==>, ENTER.
That will reset lamp timer in projector.
Thanks.

Jun 01, 2009 | Sony Multimedia Projectors

1 Answer

Reset Timer Lamp Sony VPL-HS60 projector


According to the manual, you need access to the RESET button, the left and right arrows and the ENTER button to clear the counter. Press the following in order for less than 5 seconds each:

RESET
Left Arror
Right Arrow
ENTER

The above sequence should clear the counter.

Dan

Apr 09, 2009 | Sony VPL-ES2 LCD Projector

Not finding what you are looking for?
Sony VPL-EX1 Multimedia Projector Logo

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Multimedia Projectors Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Are you a Sony Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...