Question about Office Equipment & Supplies

1 Answer

Hp photosmart 2570 all-in -one series, power up, only gets as far as flashing on light and wont power down using the power button. remove cartridges and unit recognizes this and asks for replacements,currentlt using morrisson cartridges.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem. The solution was to remove the power from the printer for 5min. Power the printer back on and the problem was gone. Hope this helps someone.

Posted on Jan 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP Photosmart 2570 All-in-One Printer


Have you tried going to hp.com, put in photosmart 2570, which comes up as 2575. Try that driver. Most of the time, there is not a great difference in the drivers. Use the basic driver. If your printer has a v or xi next to the 2570, the use that basic driver. Make sure you select the operating system on your computer. Go to "My computer, right click, select properties, the operating system will be there on the general tab.

Jan 30, 2011 | HEWLETT-PACKARD HP Photosmart Printer...

1 Answer

Printer stopped printing durring project "Assert Error b52b00b4"


From the HP website:

ISSUE: The printer displays an assert error code. Assert error codes indicate that the printer has an internal condition that may respond to a hard reset of the printer. Beyond that, service may be required. This document applies to the following products:
  • HP Photosmart p1000/1000, p1000xi printers
  • HP Photosmart p1100, p1100xi printers
  • HP Photosmart 1115 Printer
  • HP Photosmart 1215, 1215vm, 1218, and 1218xi printers
  • HP Photosmart 1315 Printer
SOLUTION: Hard reset of the printer A hard reset of the printer may clear the error. Here is how to perform the hard reset:
  1. Shut down the computer.
  2. Open the top cover of the printer and remove the print cartridges.
  3. Close the top cover of the printer.
  4. Press the power button on the printer to turn the printer off.
  5. Disconnect the communications, (USB or Parallel), cable from the back of the printer.
  6. Disconnect the power cord from the back of the printer for one minute.
  7. Reconnect the communications cable to the printer.
  8. Reconnect the power cable to the printer.
  9. Press the printer power button to turn the printer on.
  10. Open the top cover and reinsert the print cartridges.
  11. Close the top cover and print the calibration page.
  12. Restart the computer.

Mar 18, 2009 | HP PhotoSmart 1115 InkJet Printer

1 Answer

Cannot get the scanner to work. can't access scan menu to scan directly to computer


i have a hp photosmart 2570 all in one series printer it did not have the windows cd with it how can i get the printer to download or can i get the cd to down load

Oct 01, 2008 | HP Photosmart 2575 All-In-One Printer,...

1 Answer

Installing the printer


hi sir
go to control panel>
printer& fax>
double click on the add printer>
select the type> and follow the step> by inserting the printer software> it work's thank u.

Sep 03, 2008 | HP Photosmart 2575 All-In-One InkJet...

1 Answer

Continuous flash charge


Try resetting the camera once ... remove the batteries and press the power button for few seconds and put ur batteries back !!

May 23, 2008 | HP Photosmart 735 Digital Camera

1 Answer

I have got a photosmart printer 2570 we had to delete some programmmes to fix the laptop and I am unable to loacte your start up cd disc for windows so we are unable to scan etc. please can I download...


Is there there a different # like photosmart 2573 or something else? I beleive 2570 is a series and I want to get you the exact software you need. Thanks.

Apr 28, 2008 | Office Equipment & Supplies

1 Answer

Using JETCET Print with OKI C5200n Printer


The OKI 5200 is a 'GDI' or Windows only printer and does not support PCL or PostScript languages.
Most if not all of the printers listed support either PCL or PS or an inkjet based language.
I'm afraid you will not be able to print the the 5200 without it's driver loaded on the PDA.
If the 5200 supported PCL you would be able to choose any of the
Color HP Deskjets.

Oct 15, 2007 | OKI C5200n Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

101544 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

67911 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...