Question about Canon PIXMA iP3300 InkJet Photo Printer

1 Answer

Error B200 on canon PIXMA iP3300

Error B200 canon Pixma Ip3300

Posted by on

  • 3 more comments 
  • stewske Feb 13, 2009

    Hi,

    I have this problem also. The amber light flashess with 5 blinks per flash.

  • Xanda Frederica May 11, 2010

    Dear wonk,
    I'll try to help you, but would you tell me how many times it LED alarm flashes (blinking) instead error code B200. I didn't find this error code in service manual.
    Regards,


  • Anonymous Mar 17, 2014

    canon mp550 Error B200

  • Anonymous Mar 27, 2014

    error

  • Anonymous Mar 27, 2014

    error b200 canon mg5140

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 134 Answers

1 Suggested Answer

  • 1 Answer

SOURCE: CANON PIXMA iP3300

1. turn off printer
2. Hold down resume, dont realase and press power button
3. realase resume button, now press twice resume button but dont realase power button
4. realase all.
5.now press twice again resume button and plug off power cable
6. turn on printer with plugin power cable
7. your printer will reset.
iff not working, you must chek pointing contact in head printer, use some claener with cottonbuds to clear the contact.
may you sukses!!!

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset b200 error?


Well every advice is the same except a little altered (use a warm cotton swab to clean inside machine and on print head channels) but then it says if possible replace print head but honestly this has become a primitive Machine for turning humans into corpses - buy a new one.

Aug 15, 2010 | Canon PIXMA iP3300 InkJet Photo Printer

1 Answer

Error b200 on canon iP3300


There is no specific solution for this error, but most problems related to Error code B200 is fixed after restarting the machine. Please follow the instructions below:
1. Turn off the machine (if power button is not working or seems hanged, unplug the power cord from the printer.)
2. Disconnect both the usb and power cord from the printer.
3. Delete the printer from the Control Panel of the computer. Start > Printers and Faxes > and delete the printer, right-click the printer's name and select delete.
4. Now reconnect the printer on the usb port and plug in the power cord. Power on the printer and reinstall the driver when asked.

If there's no mechanical problem, your problem will be definitely fixed. It could be related to the usb cable, so try with another cable and make sure there's no problem related to transmission/communication between printer and your computer.
If the problem persists, there's no other alternative, the only solution is from the Canon, you can use this link to contact canon. They will assist you what needs to be replaced and what are the steps to be taken before replacing any parts.

Good luck.

Thanks for using FixYa.

Jun 04, 2010 | Canon PIXMA iP3300 InkJet Photo Printer

1 Answer

I have a canon Pixma IP3300 I have changed the ink and the printer comes up with an error saying change printer head what is this? Ads by Google


Check to see if you removed any protective tape on the cartridge. Check to see if you have it in place correctly. You may have a bad ink cartridge especially if you bought it used

May 08, 2010 | Canon PIXMA iP3300 InkJet Photo Printer

1 Answer

PIXMA iP3300 InkJet Photo Printer: my canon iP3300 has an alternately flashing green ...


I may be that your printerhead passed away. A replacement might do the trick.

May 07, 2010 | Canon PIXMA iP3300 InkJet Photo Printer

3 Answers

Canon ip 3300 flash 5 times orange


pixma ip3300 flash orange 5 times, i remove all catridge / remove print head and orange flash 5 times. help!!!

Sep 18, 2009 | Canon PIXMA iP3300 InkJet Photo Printer

1 Answer

How to reset printer canon pixma ip3300?


try this STEP 1:
- Disconnect printer from AC power

STEP 2:
- Press and HOLD the POWER button, and
connect printer to AC power

Mar 09, 2009 | Canon PIXMA iP3300 InkJet Photo Printer

1 Answer

CANON PIXMA iP3300


1. turn off printer
2. Hold down resume, dont realase and press power button
3. realase resume button, now press twice resume button but dont realase power button
4. realase all.
5.now press twice again resume button and plug off power cable
6. turn on printer with plugin power cable
7. your printer will reset.
iff not working, you must chek pointing contact in head printer, use some claener with cottonbuds to clear the contact.
may you sukses!!!

Jun 21, 2008 | Canon PIXMA iP3300 InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA  iP3300 InkJet Photo Printer Logo

3,583 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...