Question about Projection Televisions

1 Answer

Need to program a ge universal remote control to operate a Magnavox Total Control System TV

Posted by on

  • crabjars Jun 22, 2008

    I need both, the code and the instructions for the GE Universal control JC021. I am trying to use this control to turn on/of a Magnavox TV "Total Control System". Any help would be greatly appreciated. Thanks.

  • Andrew Reed
    Andrew Reed May 11, 2010

    do you need a code for the tv or/and instrusions

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Here is the 3 digit codes ive found to try 586, 651, 720, 666, 731, 800

MAGNAVOX ............ 0062 0004 0009 for digit codes
........................... 0456 0183 0226 0288
........................... 0008 0068 0075 0141

Manually turn on the device (TV, VCR, DVD, etc.) you wish to
program.

2. Press and hold the CODE SEARCH/SETUP button on the remote
until the INDICATOR LIGHT lights, then release.

3. Press and release the button for the device you are programming
(TV, VCR, DVD, etc.). For AUX, press AUX then the device button
you are assigning to AUX. The INDICATOR LIGHT will blink then
remain lit.

4. Enter the three or four digit code for your device using the number
buttons in the GE Universal Remote. After your code is entered the
INDICATOR LIGHT will turn off.

5. Aim the remote at the device (TV, VCR, DVD, etc.) and press the
POWER button. Your device should turn off.

Note: If your device does not respond to the first code listed,
repeat steps with the next code. If none of the codes listed for your
device work for your device or your brand is not listed,
try the Code Search method described below.

USING CODE SEARCH FUNCTION
If your TV, VCR, DVD, etc. does not respond after you have tried all the codes
for your brand or if your brand is not listed, try searching for your codes by
following the steps below.

1. Turn on the device you wish to program.

2. Press and hold CODE SEARCH/SETUP until the INDICATOR
LIGHT lights, then release.

3. Press and release the device button for the device you are
programming (TV, VCR, DVD, etc.). The INDICATOR LIGHT will
blink once then remain lit. For AUX, press AUX then the device

Posted on Jun 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set color, verticl and horizontal lines


Not all universal remote control's operate MENU button on TV!!!
If you have >>COLOR separation ( red blue green) and CAN NOT adjust via MENU button then you must replace conversion IC's>>
part number: STK 392-xxx.....easy repair!!

May 19, 2010 | Hitachi 53FDX01B 53" Rear Projection...

4 Answers

Codes


Here are some sites that will have your codes and instructions on how to enter them:

  1. Universal TV Remote Control codes Universal remote control codes for all TV and VCR brands including: at&t, beery systems, bondwell, curtis mathis, dish network, ge, gemini, ...
    www.tvcodes.com/ - 23k - Cached - Similar pages -
  2. Universal Remote Control Codes Universal Remote Control Codes for DVD, VCR, TV and Home Theaters System.
    www.remote-codes.com/ - 7k - Cached - Similar pages -
  3. Philips Magnavox Universal Remote Code Philips Magnavox Universal Remote Code - Instructions on how to program your Philips Magnavox universal remote control.
    www.universal-remote.net/philipsmagnavox.html - 35k - Cached - Similar pages -

Apr 17, 2009 | Projection Televisions

1 Answer

I need to re-program my remote control to my TV Phillips, the remote is a General Electric Universal


I went to the programing GE Universal remote control page, and got the manual

Thanks for the support,

Apr 14, 2009 | Projection Televisions

1 Answer

Need code to program a universal remote!


general process for a universal remote control:

  1. push and hold setup 3 seconds
  2. select the device to control (TV DVD etc)
At this moment TV has to be ON (turn tv on by front panel)
3. continue with remote control pushing power button again and again and again SLOWLY
4. when the tv turns off then press enter to save your code.

Apr 14, 2009 | Projection Televisions

1 Answer

I am trying to program a new remote and i need my remote code to program the tv can you find the code for magnavox msd513f


Not sure your MSD513F is not listed, and dont know your chassis # so here is what I can offer with what you gave me from the manuals

FOR THE
51MP392H/17
PHILIPS phone # 1-800-432-8542

Universal remote control - RC2018/1
Universal RC managing TV and peripherals

from the parts manual
Cabinet & Accessory Parts
REMOTE Transmitter, RC2061/01 . . . . . . . 3128 147 14611

Sep 15, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Need remote for magnavox hd tv


You can get the phillips universal remote at the following site and it will operate the functions of your magnavox and its also one of the easiest to program. They can also get the origional remote if you send them an email leaving your model number. heres the link.
http://servicemanuals.vstore.ca/

Apr 25, 2008 | Projection Televisions

1 Answer

Remote control


The following site has numerous remotes and universals I would recommend the phillips universal remote, as Its one of the easiest to program and works hundreds of models. Heres a link to their site
http://servicemanuals.vstore.ca/

Apr 17, 2008 | Projection Televisions

2 Answers

I need the code to program a magnavox remote to a RCA tv


A magnavox remote should program like the phillips universal. I will post the link. If this doesnt help post the model number of the magnavox remote that you are trying to program. the model number is usually in the battery compartment.
http://www.universal-remote.net/philipsmagnavox.html

Feb 03, 2008 | RCA R52WM24 52" HDTV Projection Television

1 Answer

Remote Control for Magnavox Big Screen TV (PTV 705-AH01)


sgtdar, list the model & chassis number (located on back of tv), if set is old the universals won`t work because as more newer sets come out they delete the older ones because the chip in the remote will only hold so many codes, BMW Rider

Dec 12, 2007 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...