Question about Lexmark Office Equipment & Supplies

2 Answers

Need installation cd rom disk - Lexmark Office Equipment & Supplies

Posted by on

  • Anonymous Aug 25, 2008

    Need the CD-ROM for my Lexmark X5150 all in one printer-moved and lost my CD-ROM

×

2 Answers

You bet thanks Benimur, you're awsome

Posted on Jul 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

You can try getting in touch with Lexmark at any of their offices here and request for a second copy of the CD ROM installer disc

or

you can download the appropriate driver software for your specific printer here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Posted on Jun 21, 2008

4 Suggested Answers

jeffreyhenry
  • 33 Answers

SOURCE: installing without cd-rom/disk

Plug it into your computer via usb and see if your computer can find drivers for it. If your computer doesn't recognize the device, check the manufacturer's website for support via download.

Posted on Jan 14, 2009

  • 53 Answers

SOURCE: NEED A InSTALLATION CD-ROM DISK

You can also download the driver appropriate for your OS from the following link:
http://downloads.lexmark.com:80/perl/downloads/downloads.cgi?ccs=229:1:0:439:0:0

Posted on Jun 01, 2009

  • 1738 Answers

SOURCE: Lost CD-Rom installation disk

Go to the epson website and download the driver from the website.

Posted on Aug 10, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi having problems with my partners Fujitsu Siemens ScaleOP Desktop Computer. She recently reformatted the PC with a Genuine copy of Windows XP which installed perfectly without any hitches but when...


Can the drive read other disks? I'm guessing no. If no, it would appear as if the drivers for the CD rom are not loaded. If this is the case, you will need an internet connection to download the drivers for the cd rom so it will work. Other than that,you can try to install generic cd rom drivers through windows, that may work. Good luck.

Sep 26, 2012 | Computers & Internet

3 Answers

Purchased a Gear Head webcam WC745blu 1.3mp, it came with a mini disk to install software. I have a standard cd-rom for standard size disks so I cannot install drivers with this disk.The website does not...


Well the disk actually works on most standard CD-ROMS. paper_bag.jpg If its cd-rom that is used in laptops (extremely thin) it should also work but you can always find a computer with one of these trays and then copy the contents.

Apr 03, 2011 | Computers & Internet

1 Answer

How to instal file 'asms The file 'Asms' on Windows XP Professional Service Pack 2 CD is needed" when installing WinXP Pro,


When you install Microsoft Windows XP, you may receive the following error message:
[Files Needed]
The file 'Asms' on Windows XP Professional CD-ROM is needed. Type the path where the file is located, and then click OK.
This issue may occur if the Setup program cannot communicate with the CD-ROM drive.
To resolve this issue, use the appropriate method for your computer.
Hard disk formatted with FAT or FAT32 file system
If the hard disk is formatted with the FAT file system or with the FAT32 file system, follow these steps:
Use a Microsoft Windows 98 Second Edition or Microsoft Windows Millennium Edition (Me) Startup disk with CD-ROM drivers to restart the computer.
Copy the Xcopy.exe tool from the Windows 98 Second Edition CD-ROM, the Windows Millennium Edition (Me) CD-ROM, or the hard disk to the Windows Startup disk. To do this, use the appropriate method.
Windows 98 Second Edition CD-ROM
Insert the Windows 98 Second Edition CD-ROM in the CD-ROM or DVD-ROM drive, and then at the command prompt type the following lines, pressing ENTER after you type each line, where cd-rom is the drive letter of the CD-ROM or DVD-ROM drive:
c:
copy cd-rom:\win98\smartdrv.exe
copy cd-rom:\tools\oldmsdos\xcopy*.*
Windows Millennium Edition (Me) CD-ROM
Insert the Windows Millennium Edition (Me) CD-ROM in the CD-ROM or DVD-ROM drive, at the command prompt type the following lines where cd-rom is the drive letter of the CD-ROM or DVD-ROM drive, and then press ENTER after you type each line:
c:
copy cd-rom:\win9x\smartdrv.exe
extract cd-rom:\win9x\win_17.cab xcopy.exe /L c:\ xcopy.exe
extract cd-rom:\win9x\win_17.cab xcopy32.exe /L c:\ xcopy32.exe
extract cd-rom:\win9x\win_19.cab xcopy32.mod /L c:\ xcopy32.mod
Hard disk
At the command prompt, type the following lines where drive is the drive letter of the hard disk where Windows is installed, and then press ENTER after you type each line:
c:
copy drive:\windows\smartdrv.*
copy drive:\windows\xcopy*.*
Eject the Windows 98 or Windows Millennium Edition (Me) CD-ROM, and then insert the Windows XP Professional CD-ROM.
Copy the I386 folder and all its subfolders to the hard disk. To do this, type the following lines at the command prompt where cd-rom is the drive letter of the CD-ROM drive, and drive is the drive letter of the hard disk, and then press ENTER after you type each line:
smartdrv
xcopy cd-rom:\i386 drive:\i386 /e
Restart the computer, and then start the Setup program again.
When you receive the error message, click Browse, and then type the path of the I386 folder on the hard disk.
Note You may be prompted several times for the location of this folder. If Browse is not available, see the "Hard disk formatted with NTFS file system" section.
Hard disk formatted with NTFS file system
If the hard disk is formatted with the NTFS file system and you are upgrading an earlier version of Windows, use one of the following methods.
Method 1
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
When you receive the error message, press SHIFT+F10 to start a command session.
Type regedit.exe, and then press ENTER.
Click HKEY_LOCAL_MACHINE.
On the File menu, click Load Hive, and then load %Windir%\System32\Config\System.sav.
When you are prompted to specify a name, type Test.
Locate and then click the following key:
HKEY_LOCAL_MACHINE\Test\ControlSet1\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Delete the UPPERFILTERS and LOWERFILTERS registry keys.
Repeat steps 6 and 7 for the other ControlSet# keys under the Test hive.
Click File, and then click Exit to quit Registry Editor.
If the path in the error message is the correct drive letter for the CD-ROM drive, click OK to continue the Setup program.
If you receive the error message again, the Setup program cannot correctly read from the CD-ROM drive, or the path information is incorrect. In this case, restart your computer and let the Setup program resume.
Method 2
If you cannot start Regedit.exe at the command prompt, and there is another available partition where you can install Windows on the hard disk, follow these steps:
Install Windows in the other partition.
Start the new installation of Windows, and then start Regedit.exe.
Follow the steps in method 1, but load the System.sav hive from the original Windows folder.
Method 3
If you are not using a retail Windows XP CD-ROM with a hologram (for example, if you are using a burned CD-ROM), try to run the Setup program from a retail CD-ROM with a hologram. To verify this, start the computer by using Recovery Console, and then check the C:\$win_nt$.~ls folder. Look for the Asms folder. If the folder is missing or the files that it contains are zero bytes, the CD-ROM was not burned correctly.
For additional information about how to use Recovery Console, click the following article number to view the article in the Microsoft Knowledge Base:
307654 (http://support.microsoft.com/kb/307654/ ) HOW TO: Install and use the Recovery Console in Windows XP

Apr 27, 2010 | Microsoft Windows XP Professional With...

1 Answer

Trying to install XP when disk selection comes up it reads, "Unkown disk. There is not disk in this drive". NOt sure what that means.


your drive is not being read,
have you set BIOS to boot from CD ROM,
is your CD ROM working,
is your XP CD working

Do the following
1 go to BIOS and re-set to BOOT from CD ROM
2 use another copy of XP/Win98/Vista etc to verify if CR ROM is reading the CDs else...
if you doubt CD ROM drive has a problem....
3 use a USB external CD ROM, and to do that u need to re-set the BIOS to boot from USB CD ROM

Dec 07, 2009 | IO Magic Corporation GigaBank (I250HD35)...

1 Answer

Need to find out how to install my memorex double layer 16x


Ok here is what you need to do. Open the box that the driver came in and also the side panel of your computer. Remove the cables that are attached to the current CD-ROM drive and if you need to unscrew the screws that are holding the CD-ROM drive in place which you'll need a phillips screw driver for. Remove the old CD-ROM and put in the new one and reconnect the cables to the new one. If an installation disk came with it then put that in the CD-ROM drive and install whatever is on that disk. Afterwards you should be ready to go. If you need anything else please let me know!

Apr 05, 2009 | Computers & Internet

1 Answer

HOW TO INSTALL WINDOWS 98


How to Install Windows 98 loadTOCNode(2, 'moreinformation'); 
  1. Insert the Windows 98 Startup disk in the floppy disk drive, and then restart your computer.
  2. When the Windows 98 Startup menu is displayed, choose the Start computer with CD-ROM support option, and then press ENTER.
  3. If CD-ROM support is provided by the generic drivers on the Startup disk, you receive one of the following messages, where X is the drive letter that is assigned to your CD-ROM drive: Drive X: = Driver MSCD001

    Drive X: = Driver OEMCD001 NOTE: If your CD-ROM drive is not available after you boot from the Windows 98 Startup disk, install the CD-ROM drivers that are included with your CD-ROM drive. For information about how to obtain and install the most current driver for your CD-ROM drive, view the documentation that is included with your device, or contact your hardware manufacturer.

  4. Insert the Windows 98 CD-ROM in the CD-ROM drive, type the following command at a command prompt, and then press ENTER X:\setup where X is the drive letter that is assigned to your CD-ROM drive.

  5. When you receive the following message, press ENTER, and then follow the instructions on the screen to complete the Setup procedure: Please wait while the Setup initializes. Setup is now going to perform a routine check on your system. To continue press Enter.

Jan 21, 2009 | Microsoft Windows 98 for PC

1 Answer

My computer will not read any of my disk or install


when you say disk did you mean hard disk? if you do... did you recenlty install a new hard disks?... if you did... did you check the jumper-master-slave configuration when installing the new hard disk?
only one hard disk can be configured as master in each ide channel. set up to master (not single) the one on the end of the ide cable and set up to slave the one attached to the midlle of the ide cable.
check that both hard drives are properly attached to the cable and that the power cable is properly seated.

when you say disk did you mean cd rom disks or dvd disks?
does it work in other computers? if it doesnt.. you cd/dvd disks may be the problem
are you trying to read a dvd disk on a cd rom only drive... you can't read a dvd in a cd rom drive.
if you cd/dvd rom drive should read the disk you're putting in, check in device manager if your system detects the cd/dvd rom drive. if it doesn't: check the physical connections (reseat ide cable, check jumper configuration for slave and master on your cd/dvd rom drive and check that the power cable is properly seated), check also in device manager the properties of the cd/dvd rom drive and check if it says on device status if the device is working correctly. if it doesn't post the error code that it may give you or google a solution with error code.

suggestion.. be more specific when posting your questions.. that way it will be easier for a solution to be provided as your issue could be interpreted in different ways


Sep 24, 2008 | HP Computers & Internet

2 Answers

Installation


You need to use floppy disks (called boot disks) to boot DOS with cd-rom drivers, because the win98 cd isn't bootable by default.

I suggest you to go to http://www.bootdisk.com/bootdisk.htm and grab the respective windows 98 boot disk.

You will need a functional computer to write the disk image into the floppy.

After that put the boot order in BIOS as floppy first.

Once you see DOS prompt A:\> just access your cd-rom drive like d: or e: and then type install

WaZZie

Jan 04, 2008 | Microsoft Windows 98 for PC

6 Answers

Panasonic Toughbook CF-27


i need help i have a panasonic cf-27 toughbook with a usb cd drive and usb floppy drive ive tried both seperate and with a multi usb connector to boot both but it doesnt find them can anyone help me?

Oct 26, 2007 | Panasonic Toughbook CF-27 Notebook

1 Answer

CD/DVD rom. CD part - does not work


Inside your DVD rom is two heads I believe they are diamond both do the same things which is to read them. The CD head is poked (Broken). Try cleaning it with the proper solution. If its no go then the latter I am afraid stands!.

Sep 24, 2007 | Dell Latitude C400 Notebook

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...