Question about E-Machines eMachines Monitor E15T4

2 Answers

White light My monitor has gone into the light. My computer boots up, I hear sound, but I get no picture. It starts out black then a blank white screen. I tried connecting it to another computer and same problem. I unplugged everything and replugged and nada, I checked to ensure there were no bent pins, and then reinserted that blue monitor plug, and nada. I frustrated and have no idea what to do next. I am hoping that I do not need to purchase a new monitor as she still powers up, she just isn't getting "the big picture." or any picture at all. What is a geek mom to do:O(

Posted by on

  • thegeekmom Jun 21, 2008

    Greetings and Aloha,
    Here are the monitor specs:

    E 19T5W

    S/N TFT10W80PS+

    I have no problem taking the back off anything and trying my hand at fixing the problem as long as I have someone knowledgeable walking me through the process. the Information I require is 1. what type of fuse , 2.what are the fuse specs, and 3. can I get it or its equivalent at Radio Shack.

    A hui hou Onward and upward excelsior
    the Geek Mom mother of the Technogeeks, My son The Chef and The Geek Divas


  • thegeekmom Jun 23, 2008

    Greetings Your Geekiness,
    I was under the impression that a blown fuse would mean no power and I would not get any sort of screen at all. The yellow and blue lights both come on, what I get is a white screen and no picture.
    Once again, frustration abounds.
    Hawaiian vintage chocolate anyone:O)

    Intrepid and endeavoring to perservere
    The Geek Mom


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

You would need a basic multimeter to check continuity of the fuse. Second it will be a surface mount type you probably will not find at radioshack. And will probably be around 3 amps You can probably substitute a pico fuse if room allows.

Posted on Jun 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 46 Answers

Your inverter is working or you would not have the light. I suspect the fuse on the LCD panel itself has blown , which is under the metal cover on the lcd panel itself labeled F1 near the input connector has blown. I would check this first.

Posted on Jun 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No display it is power is on


Hook up to external monitor .. Does the pre boot screen pop up (black and white writing at start ) ? If display runs on external monitor then your screen needs replacing usually or if you see a vague image on laptop screen then inverter or backlight is gone .. if no display on external and no pre boot screen probably the graphics chip on laptop has malfunctioned.

Dec 15, 2014 | Acer AL2021M (Silver) 20" LCD Monitor

1 Answer

VX924 (Silver, Black) 19" LCD Monitor: monitor has suddenly gone white...


My VX924 did the same thing but now displays nothing and power switch light just blinks. According to an answer listed on previous page, it may have bad capacitors. I may have to take a look at them. Viewsonic repair facility examination of this monitor runs $70.

May 17, 2010 | ViewSonic VX924 19" LCD Monitor

1 Answer

When I turn on my monitor, its goes straight to a


  • when you turn on computer. after sometime your monitor goes to standby mode and monitor light colour will be orange it means problem with your computer not monitor.
  • After this You Check your VGA Card.
  • When you turn on computer is there any beep.
  • After this also check your RAM.
  • May be problem with your RAM.
Try this Technique .

Mar 13, 2010 | HP w1907 LCD Monitor

1 Answer

When i plug in the switch "on" my HP COmpaq LCD 15" monitor can not respond. black screen and the power putton light GREEN show but not display. after 1 minute the green light off. when i soon "on" monitor...


ysm7862001, Monitor has possible problem lighting-up cold cahtode fluorescent lamps that provide lcd panel with white light from rear(reverse side) of the panel. No white light= black or blank n black screen. Read my fixya profile for all options you might have open to you.
12fixlouie

Mar 01, 2010 | HP Compaq 1501 15" LCD Monitor

3 Answers

Power light is green but screen is black


Do you get anything at all on the screen--like white writing at startup?
Even if your video drivers have become corrupt, they are not used until Windows actually starts.
It very well could be the flourescent backlight has gone bad. Can you adjust the brightness/contrast at all to see anything?
If those controls do nothing for you, then you're looking to get a new monitor.
Your monitor does have a sort of power supply for the backlight and that could be bad, but if you're not into taking it apart, then you are far better off buying a new monitor.

May 27, 2009 | Philips Computers & Internet

1 Answer

The monitor gone blank white light nothing else


Check this FixYa thread:

http://www.fixya.com/support/t1372203-white_screen

It might be a loose cable or perhaps the video controller is bad. If the unit is out of warranty, you might be able to try to fix the cable.

Jan 27, 2009 | Sceptre X9G-NagaIV 19" LCD Monitor

1 Answer

SVA Color TFT LCD is white on start up but goes blank.


when i turn the computer on the light on the monitor blinks green but i cant get it to turn on..i have a black screen.

Jan 16, 2009 | Computers & Internet

1 Answer

Sylvania (proview) cl2072b flat panel monitor


Well the first and second paragraphs make me say the Inverter/power board must be replaced.

A white display typically means either your display cable (in your monitor) is loose or logic board is dead.

Either one of these things typically mean take it in for an estimate to repair, and if it's too much, buy a new one.
With your luck I think I might switch to big cheap CRT.

Mar 12, 2008 | Proview PL926WBi 19" LCD Monitor

1 Answer

Startup issue


Sounds like a problem in the power supply section that will need component-level electronic troubleshooting. If it's under warranty and less than 30-60 days, I would suggest an exchange. If not, I would call the number in the manual for help.

Jan 01, 2007 | Apple Cinema HD 30" LCD Monitor

1 Answer

Constant white screen


check the brightness and contrast from the menu on the monitor try increasing it ... the problem will get solved...
if same problem persists contact ur near by experrt technician he may tell that the tube is gone he must recharge it....

Sep 11, 2006 | Sony SDM-HS73P 17" LCD Monitor

Not finding what you are looking for?
E-Machines eMachines Monitor E15T4 Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...