Mfc 210 Hi Guys,I have this printer for a while ,everything was cool until two weeks ago I chang two of color cartriges,I don;t remember what colors were there. Now yellow,and magenta is not printing,Black and blue are fine,I use generic cartriges.Please if youcan help me . Thanks in advance Abe

Reconnect it with the router

perform head cleaning and flushing

Hi

Remove the black ink cartrige and rub the print head into a plain paper with rubbing alcohol until ink flows. If not rubbing alcohol, no problem. Just rub the printhead into a plain paper.

Then try to print again. I hope it helps you. Please post comments if you need more help. Regards

Hi


To copy a page in Brother MFC210 you need to press copy button on your printer, load your document and press black copy (to copy in BW) or color copy. You can also select number of copies by pressing keys 1 to 99 before pressing black copy or color copy button.

For your user manual you can visit this link---

Brother MFC 210 User Manual


Daniel Scott

chack your balck cartridges may be it's finish just tak out seak that will fome to know is the ink of finish

relpace that it will work fine

Have you tryed to do head cleaning do it about 10 times and look sorry if this dose'nt help.

Check your ink cartridge if they are properly installed.

Check your print settings.

Make sure your ink cartridge are not empty.

Replace your ink with the original Brother ink cartridge.

if the printer queue is empty and you have turned both comp and printer to off it should reset.
Frpm your explanation it sounds like your color cartridge has a problem Tricolor red,blue, yellow maybe one is empty the black is a separate cartridge

My color has not worked well in the past few months. Now I get the message Unable to Print, Use Troubleshooting and rountine maintenance chapter in user's manual. I've tried everything it told me. I've removed all ink cartridges and left them upright (they are ALL brand new) and cleaned all the ink ports. I've cleaned the machine several times. It's told me there's no ink cartrige, I've replaced them, turned the machine off and on, unlplugged, etc. Then go to print and I get the same message again and it won't print. The machine is almost 2 years old and has worked fine until about 6 months ago when the magenta stopped working all together. Now this. Any help? Thanks.