Question about Vizio L32 32 in. LCD HDTV

2 Answers

Vizio 32 does not turn on

I plugged the power cord and turned the power switch on and the the led is yellow and trying to become green, blinks from yellow to green to yellow but does not turn on. There is a slight hissing sound.

Does any one know if it can be fixed and what is going on

Posted by on

  • 4 more comments 
  • leotheking Jun 21, 2008

    Previously it used to turn off and on itself while watching.

  • gdog434 Jun 26, 2008

    TV will go off on its own have the same problem

  • Anonymous Jun 27, 2008

    L23 vizio tv the yellow LED remain lit

  • wz6rab Jun 29, 2008

    The same problem just occurred today. TV will not turn on. Does anyone have a solution?

  • pbrian99 Jul 14, 2008

    Same thing. LED is yellow and stays yellow.

  • katdoyle Jul 16, 2008

    our started out going off and on all by itself (while on) not it will not go on at all.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Try to reset it, if doesn't work then you may need a new mainboad

Posted on Nov 12, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The tv not not power 0n dead set,1 ic blown out stby sw,how I can fix the board.Thank you.

Posted on Jul 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vizio m550nv amber light is on but tv will not power on


EASY HOW TO FIX LED Vizio TV- no power - YouTube

? 6:13
https://www.youtube.com/watch?v=9xZcTWr2yV0
Nov 5, 2013 - Uploaded by Tampatec
DiY How to Fix led / lcd Vizio TV service repair - no powerservice repair review guide no red blinking led ... Theorange/amber light turns on when plugged in. But the TV won'tturn on after that (the light does not turn white).

Vizio TV logo Flashing (Blinking), TV will not turn on, not ...

? 4:01
https://www.youtube.com/watch?v=MDzCzZdgbdg
Jan 5, 2012 - Uploaded by Leo P
This is model XVT3D424SV, I was watching a DVD, I switched the input to TV, tried to connect to netflix, it was ...

HOW TO FIX VIZIO TV - What causes no power - YouTube

? 5:53
https://www.youtube.com/watch?v=5k1Mc1f6O3E


Jan 17, 2016 | Vizio M550NV 55 in LCD HDTV

1 Answer

How to fix a 32 inch phillips flat screen tvs that wont turn on


Tv,now turn on it don't have a power LED light at all or a blinking power LED light?The tv power supply board is dead.That the board where the power a/c cord plug into it.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

May 06, 2011 | Philips 32PF5531D 32 in. LCD Television

1 Answer

I also have a Vizio 32" and I was having problems


Yes,no power LED light indication at all or the power LED light indication are flashing?The power supply board is the causes and the problems.That the board,where the power a/c cord plug into it.Tries websites like Shopjimmy,Ebay.com to buy a whole refurbish power supply board for the replacement.

Dec 04, 2010 | Vizio P4 46 in. HD-Ready Plasma Television

1 Answer

The power went off at my house due to an overload and when the breaker was turned back on, the tv had no power, no green or orange light. I unplugged the power cord and plugged it in later and the tv...


The power supply board is dead,that the board where the power cord plug into it.Take ur tv aparts,replaced the power supply board,ur tv should work again.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.

May 23, 2010 | Vizio L32 32 in. LCD HDTV

1 Answer

Dell e137fp monitor flashing green...


Below you will find my recommendations for troubleshooting this issue:

1. Reseat the power cord and verify a good power source.

To reseat the power cord, follow the steps below:

1.1 Power down the system.
1.2 Unplug the power cord.
1.3 Wait approximately one minute.
1.4 Reseat the power cord.
1.5 Verify that the power cord is plugged directly into a known good power outlet.

2. Verify that the monitor is receiving power from a known good outlet and bypass any power strips.

To test the power outlet, perform the following steps:

2.1 Unplug the monitor power cable from the power outlet.
2.2 Plug in a different device, and verify that the device is operational.
2.3 If there is no power try another outlet. Remove any power strips and try plugging directly into the main power outlet.

3. Verify the monitor is powered on and the power button is engaged.

Ensure that the monitor is powered on and that the power button is fully engaged. To do so, check the power LED on the front of the monitor; it should be lit.

NOTE: There are two types of power switches:
A mechanical switch characterized by a long travel. You have to push it further and you will hear an audible click.
An electrical switch that has a short travel and almost no click.

A lit monitor LED can be any of the following:

* Green
* Blinking green
* Yellow
* Blinking yellow
* A combination, such as alternating green and yellow

Any of these states indicate the monitor is receiving power and that you should proceed.

4. Swap power cables.

To try a known good power cable on the monitor, follow the instructions below:

4.1 Turn off a working monitor.
4.2 Unplug the cable from the back of the working monitor, and unplug the cable from the wall.
4.3 Unplug the cable from the monitor in question.
4.4 Plug in the cable that came from the working monitor.

5. Run the monitor self test.

To run the monitor self test, perform the following steps:

5.1 Power off both the computer and the monitor.
5.2 Unplug the video cable from the computer or video card.
5.3 Reseat the power cord to the monitor, ensuring it is plugged into a known-good outlet.
5.4 Power on the monitor.

NOTE: The monitor self test will move around on some monitor models. If the monitor self test moves, allow it to move to the affected areas of the monitor to check for the problem described.

If the Self test failed, it's possible that the monitor is faulty. Contact dell to check if it's still under warranty so they can replace it.

Jun 15, 2009 | Dell E173FP 17" LCD Flat Panel Monitor

2 Answers

Power button is green - no blinks / no picture / no sound


Unplug it from the wall, wait 2 minutes and plug it back in. if problem still exists, its probably the main pcb.

Jun 19, 2008 | Dynex 32 in. LCD Flat-Panel HDTV

1 Answer

VXL32 tries to turn on but no dice.


sound like some blown capacitors on the vga board

Apr 27, 2008 | Vizio L32 32 in. LCD HDTV

Not finding what you are looking for?
Vizio L32 32 in. LCD HDTV Logo

Related Topics:

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...