Question about Nintendo Wii Console

3 Answers

Wii remote changed batteries, wii remote will not work only the blue lights flash for a couple of seconds when i push a button. i 've only haven't had the system for more than a year yet. help please.

Posted by on

  • 1 more comment 
  • lind65 Jun 22, 2008

    I just changed the batteries in the wii controller and now it is not working? I see a previouse post with the same problem, and a reply suggesting how to register the remote. I can not find the original paper work right now. does any one know how to do this?

  • Anonymous Jun 22, 2008

    our remote just flashing for few seconds and wont work its only new

  • jimmy_jimji Feb 06, 2009

    I can't find my original wii remote, so I cannot access any home menu, and I can't seem to get the current wii remote to register. Like the first post, the blue lights flash for a few seconds, regardless of what I press, then switch off. Can anyone help?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hey did you try holding the red button where you put the batteries and holding the red button where you put the SD card all unit have an button so it can read the sensor from unit to controller....

Posted on Aug 05, 2009

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 66 Answers

Try to register the Wii controller because you need to register the controller.. or else you cant play with the wii unless you use the 1st controller they give you its already registered to the wii so if you want to use more wii controllers and you buy more you have to register 1st before playing any games at all.

Posted on Jun 21, 2008

  • Brandon Tran
    Brandon Tran Jun 22, 2008

    To register the Wii Controller you have to go to Wii Home and press the home button where that menu thing pops up and you should hold the Wii controller that you want to register and you turn it on like you turn on the other wii controllers.

  • Brandon Tran
    Brandon Tran Oct 21, 2008

    Theres a Button thats red

×

I have a problem in that it has erased the first wii remote so i cant get into wii home.....

Posted on Sep 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

None of my wii remotes wil connect and syncing them with the little red button has proved not to work, I have also changed all the batteries and even unplugged my console for about half an hour. Is th


Remove the batteries on the remote for a few seconds, put them back in.
then try holding down the buttons on both, not just clicking them, for atleast 1 seconds,

Oct 22, 2012 | Nintendo Wii Console

1 Answer

My wii fit board wont switch the blue light flashes then goes off


Unplug the AC adapter on your console out of the Power cord then wait 15 min and plug it back again.Open the front cover on your Wii, then push the red button there, then open the batteries cover on your Wii Fit and push the red button there.If this not help press and hold the red button on your Wii for 20 seconds.This will clear all synced Wii Remotes from the console.Then repeat the procedure again.In this case you need to SYNC your Wii Remote too.If this not help your Wii Fit may need service.

Nov 03, 2009 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

My wii fit board will not turn on. when button is pressed blue light flashes then turns off, have just put in new batteries


Re sinc it.Open the front cover on your Wii and push the red button there, then open the batteries cover on your Wii fit and push the red button there.If this not help Open thre front cover on your Wii and push and hold the red button for 20 seconds.This will clear all sync devices.Now try again to sinc Wii fit.In this case you need to sinc your WII Remote/s again too.If and this not help may your Wii fit need service.

Oct 19, 2009 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

Wii remotes quit working


change the batterys STUPID!

Jan 01, 2009 | Nintendo Video Game Consoles

2 Answers

Wii Remote will not stay sync with console


Have you tried the following? If this doesn't work then pleae provide details on details such as the batterys you are using, number of remotes, etc.
The Wii maunual does not give clear instructions how to reset and sync your Wii remotes. I have found that from time to time my remotes will not sync, especially after they have changed 'order' a couple of times. It appears there is a bug in the code that keeps track of remote codes, and it has a limited buffer for the storage of remote ID's / order. Here are quick step by step instructions how to reset the remote list on the Wii console and re-sync your Wii remotes.
  1. Un-plug the power cord from the back of the console for 5 minutes (60 seconds should do, but leave it off longer to ensure all the power drains).
  2. Plug the Wii back in, and turn on the power button.
  3. Open the panel on the front of the Wii unit. You will see a Red button.
  4. Open the back panel of the Wii remote where the batteries are installed. Beneath the batteries is a small button.
  5. Press and release the small button. The Blue lights on the front of the remote begin to flash.
  6. Press the Red button on the front of the Wii unit.
  7. The Blue lights on the remote should stop flashing after a few seconds. Then one Blue light will remain representing player 1.
  8. Repeat for remote 2, 3 and 4.

Dec 28, 2008 | Nintendo Wii Console

1 Answer

Remote


The problem where the lights would flash on and then go off happened to me also.

I pressed the 'sync' button on the wii remote and the red 'sync' button on the console at the same time for about 10 seconds. Let go of the buttons and then the lights should flash and light 1 on the remote came up!!!

Hope it works for all 'ya!

andy

Jun 06, 2008 | Nintendo Wii Console

1 Answer

Wii remote


Greetings baggie bird,

You need to resynch your remote to your Wii console.

You hit the sync button under the battery cover on the remote, and then when the lights are flashing on the remote, you hit the sync button on the Wii. The synch button is located under the small cover to the left of the cd/dvd slot.

Thank you,

Dort
Go Ahead. Use Us.

Apr 19, 2008 | Nintendo Wii Console

10 Answers

Remotes not synchronising


  1. Press the Power button on the Wii console to turn it on.
  2. Open the SD Card Slot cover on the front of the Wii console. Remove the battery cover on the back of the Wii Remote you wish to sync up.
  3. Press and release the SYNC button on the inside of the SD Card compartment on the console. Press and release the SYNC button just below the batteries on the Wii Remote.
  4. When the Player LED blinking stops, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

Sep 15, 2007 | Nintendo Wii Console

Not finding what you are looking for?
Nintendo Wii Console Logo

1,086 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nintendo Video Game Consoles Experts

Troy Gorman
Troy Gorman

Level 3 Expert

508 Answers

phil

Level 2 Expert

567 Answers

Raj Patel

Level 3 Expert

845 Answers

Are you a Nintendo Video Game Console Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...